DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 17

Technical content

Features

  • Temperature Compensated Over 0 C to +85C
  • Easy-to-Use Chip Carrier Package Options
  • Ratiometric to Supply Voltage
  • Gauge Ported and Non Ported Options
  • Available in Easy-to-Use Tape & Reel
  • Differential and Gauge Pressure Options

ORDERING INFORMATION

Device Name Case No. # of Ports Pressure Type Device MarkingNone Single Dual Gauge Differential Absolute Small Outline Package (MPXV2053G Series) MPXV2053GP 1369 • • MPXV2053GP MPXV2053DP 1351 • • MPXV2053DP Unibody Package (MPX2053 Series) MPX2053D 344 • • MPX2053D MPX2053DP 344C • • MPX2053DP MPX2053GP 344B • • MPX2053GP MPXM2053D 1320 • • MPXM2053D MPXM2053DT1 1320 • • MPXM2053D MPXM2053GS 1320A • • MPXM2053GS MPXM2053GST1 1320A • • MPXM2053GS MPX2053 Series 0 to 50 kPa (0 to 7.25 psi) 40 mV Full Scale (Typical) Application Examples

  • Pump/Motor Control
  • Robotics
  • Level Detectors
  • Medical Diagnostics
  • Pressure Switching
  • Blood Pressure Measurement

Freescale Semiconductor, Inc. 2 Pressure SMALL OUTLINE PACKAGES MPXV2053GP CASE 1369-01 MPXV2053DP CASE 1351-01 MPXM2053D/DT1 CASE 1320-02 MPXM2053GS/GST1 CASE 1320A-02 MPAK PACKAGES UNIBODY PACKAGES MPX2053D CASE 344-15 MPX2053GP CASE 344B-01 MPX2053DP CASE 344C-01

3 Freescale Semiconductor, Inc. Table 1. Operating Characteristics (VS = 10 VDC, TA = 25°C unless otherwise noted, P1 > P2)

  1. 1.0 kPa (kiloPascal) equals 0.145 psi.
  2. Device is ratiometric within this specified excitation range. Operating the device above the specified excitation range may induce additional

error due to device self-heating.

  1. Full Scale Span (V FSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the
  2. Offset (V off) is defined as the output voltage at the minimum rated pressure.
  3. Response Time is defined as the time for the incremental c hange in the output to go from 10% to 90% of its final value when subjected to a

specified step change in pressure.

  1. Offset stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.

Table 2. Maximum Ratings(1)

  1. Exposure beyond the specified limits may c ause permanent damage or degradation to the device.

6 Freescale Semiconductor, Inc. NOTES: DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. CONTROLLING DIMENSION: INCH. DIMENSION -A- IS INCLUSIVE OF THE MOLD STOP RING. MOLD STOP RING NOT TO EXCEED 16.00 (0.630). MAM0.136 (0.005) T 1234PIN 1 R N L G F D 4 PL SEATING PLANE -T- C M J B -A- DAMBAR TRIM ZONE: F THIS IS INCLUDED WITHIN DIM. "F" 8 PL 1 23 4 Y Z STYLE 1: PIN 1. GROUND 2. + OUTPUT 3. + SUPPL Y 4. - OUTPUT STYLE 2: PIN 1. VCC 2. - SUPPL Y 3. + SUPPL Y 4. GROUND STYLE 3: PIN 1. GND 2. -VOUT 3. VS 4. +VOUT DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.595 0.630 15.11 16.00 B 0.514 0.534 13.06 13.56 C 0.200 0.220 5.08 5.59 D 0.016 0.020 0.41 0.51 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC J 0.014 0.016 0.36 0.40 L 0.695 0.725 17.65 18.42 M 30˚ NOM 30˚ NOM N 0.475 0.495 12.07 12.57 R 0.430 0.450 10.92 11.43 Y 0.048 0.052 1.22 1.32 Z 0.106 0.118 2.68 3.00 CASE 344-15 ISSUE AA UNIBODY PACKAGE NOTES: DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. CONTROLLING DIMENSION: INCH. D 4 PL F U H L PORT #1 POSITIVE PRESSURE (P1) PIN 1 -A- -Q- S K G -P- SQM0.25 (0.010) T SSM0.13 (0.005) Q ST 12 34 SEATING PLANE B N R C J -T- STYLE 1: PIN 1. GROUND 2. + OUTPUT 3. + SUPPL Y 4. - OUTPUT DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.145 1.175 29.08 29.85 B 0.685 0.715 17.40 18.16 C 0.305 0.325 7.75 8.26 D 0.016 0.020 0.41 0.51 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC H 0.182 0.194 4.62 4.93 J 0.014 0.016 0.36 0.41 K 0.695 0.725 17.65 18.42 L 0.290 0.300 7.37 7.62 N 0.420 0.440 10.67 11.18 P 0.153 0.159 3.89 4.04 Q 0.153 0.159 3.89 4.04 R 0.230 0.250 5.84 6.35 S U 0.910 BSC 23.11 BSC 0.220 0.240 5.59 6.10 CASE 344B-01 ISSUE B UNIBODY PACKAGE PACKAGE DIMENSIONS

Freescale Semiconductor, Inc. 7 PACKAGE DIMENSIONS NOTES: DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. CONTROLLING DIMENSION: INCH. PORT #2 PORT #1 PORT #2 VACUUM (P2) (P1) SEATING PLANE SEATING PLANE K S W H L U F G D 4 PL PORT #1 POSITIVE PRESSURE -Q- 12 4 3PIN 1 -P- SSM0.13 (0.005) Q ST B N J C V R -A- STYLE 1: PIN 1. GROUND 2. + OUTPUT 3. + SUPPL Y 4. - OUTPUT DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.145 1.175 29.08 29.85 B 0.685 0.715 17.40 18.16 C 0.405 0.435 10.29 11.05 D 0.016 0.020 0.41 0.51 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC H 0.182 0.194 4.62 4.93 J 0.014 0.016 0.36 0.41 K 0.695 0.725 17.65 18.42 L 0.290 0.300 7.37 7.62 N 0.420 0.440 10.67 11.18 P 0.153 0.159 3.89 4.04 Q 0.153 0.159 3.89 4.04 R 0.063 0.083 1.60 2.11 S U 0.910 BSC 23.11 BSC V 0.248 0.278 6.30 7.06 W 0.310 0.330 7.87 8.38 0.220 0.240 5.59 6.10 CASE 344C-01 ISSUE B UNIBODY PACKAGE

Freescale Semiconductor, Inc. 8 CASE 1351-01 ISSUE A SMALL OUTLINE PACKAGE PAGE 1 OF 2 PACKAGE DIMENSIONS

9 Freescale Semiconductor, Inc. CASE 1351-01 ISSUE A SMALL OUTLINE PACKAGE PAGE 2 OF 2 PACKAGE DIMENSIONS

Freescale Semiconductor, Inc. 10 CASE 1369-01 ISSUE D SMALL OUTLINE PACKAGE PACKAGE DIMENSIONS PAGE 1 OF 2

Freescale Semiconductor, Inc. 11 PACKAGE DIMENSIONS PAGE 2 OF 2 CASE 1369-01 ISSUE D SMALL OUTLINE PACKAGE

Freescale Semiconductor, Inc. 12 PACKAGE DIMENSIONS CASE 1320-02 ISSUE B PAGE 1 OF 2

Freescale Semiconductor, Inc. 13 PACKAGE DIMENSIONS CASE 1320-02 ISSUE B PAGE 2 OF 2

Freescale Semiconductor, Inc. 14 Pressure PACKAGE DIMENSIONS CASE 1320A-02 ISSUE A PIN 4 PIN 1 PAGE 1 OF 2

15 Freescale Semiconductor, Inc. Pressure PACKAGE DIMENSIONS CASE 1320A-02 ISSUE A PAGE 2 OF 2

Table 3. Revision History

Rev. 9 How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support Information in this document is provided solely to enable system and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/salestermsandconditions. Freescale, the Freescale logo, Energy Efficient Solutions logo, are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2012 Freescale Semiconductor, Inc.