MPX2010 FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
Features
Temperature Compensated over 0 °C to +85°C Ratiometric to Supply Voltage Differential and Gauge Options Typical Applications Respiratory Diagnostics Air Movement Control Controllers Pressure Switching
ORDERING INFORMATION
Type Options Case No. MPX Series Order No. Packing Options Device Marking SMALL OUTLINE PACKAGE (MPXV2010G SERIES) Ported Elements Gauge, Side Port, SMT
1369 MPXV2010GP Trays MPXV2010G
Differential, Dual Port, SMT
1351 MPXV2010DP Trays MPXV2010G
UNIBODY PACKAGE (MPX2010 SERIES) Basic Element Differential 344 MPX2010D MPX2010D Ported Elements Differential, Dual Port 344C MPX2010DP MPX2010DP Gauge 344B MPX2010GP MPX2010GP Gauge, Axial 344E MPX2010GS MPX2010D Gauge, Axial PC Mount 344F MPX2010GSX MPX2010D MPX2010 MPXV2010G SERIES SMALL OUTLINE PACKAGE PIN NUMBERS
1 GND(1) 5 N/C
3 VS 7 N/C
4 VOUT 8 N/C 1. Pin 1 in noted by the notch in the lead. COMPENSATED PRESSURE SENSOR 0 to 10 kPa (0 to 1.45 psi) FULL SCALE SPAN: 25 mV SMALL OUTLINE PACKAGES MPXV2010GP CASE 1369-01 MPXV2010DP CASE 1351-01 UNIBODY PACKAGE PIN NUMBERS
1 GND(1)
- Pin 1 in noted by the notch in the lead. 3 VS 2 +VOUT 4 VOUT UNIBODY PACKAGES MPX2010GS CASE 344E-01 MPX2010GSX CASE 344F-01 MPX2010GP CASE 344B-01 MPX2010DP CASE 344C-01 MPX2010GP CASE 344-15
2 Freescale Semiconductor
Figure 1. Temperature Compensated and Calibrated vacuum side (P2) relative to the pressure side (P1). the stand-alone pressure sensor chip. Table 1. Maximum Ratings(1)
- Exposure beyond the specified limits may c ause permanent damage or degradation to the device.
Table 2. Operating Characteristics (VS = 10 VDC, TA = 25°C unless otherwise noted, P1 > P2)
- 1.0 kPa (kiloPascal) equals 0.145 psi.
- Device is ratiometric within this spec ified excitation range. Operating the device above the specified excitation range may induce additional
error due to device self-heating.
- Full Scale Span (V FSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the
- Offset (V OFF) is defined as the output voltage at the minimum rated pressure.
- Accuracy (error budget) consists of the following:
Linearity: Output deviation from a straight line relations hip with pressure over the specified pressure range. and from the minimum or maximum operating temperature points, with zero differential pressure applied. or maximum rated pressure, at 25°C. TcSpan: Output deviation over the temperature range of 0° to 85°C, relative to 25°C. TcOffset: Output deviation with minimum rated pressure applied, over the temperature range of 0° to 85°C, relative to 25°C. Variation from Nominal: The variation from nominal val ues, for Offset or Full Scale Span, as a percent of VFSS, at 25°C.
- Response Time is defined as the time form the incremental change in the output to go from 10% to 90% of its final value when subjected to
a specified step change in pressure.
- Offset stability is the products output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.
4 Freescale Semiconductor
Figure 2. Output vs. Pressure Differential very small and are shown under Operating Characteristics. calibration and temperature compensation. Figure 3. Unibody Package: Cross Sectional Diagram (Not to Scale) pressure signal to be transmitted to the silicon diaphragm.
calculations required are burdensome. calculations are more straightforward for the user. Figure 4. Linearity Specification Comparison differential pressure applied, P1 > P2. Table 3. Pressure (P1) Side Delineation
6 Freescale Semiconductor
NOTES: DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. CONTROLLING DIMENSION: INCH. DIMENSION -A- IS INCLUSIVE OF THE MOLD STOP RING. MOLD STOP RING NOT TO EXCEED 16.00 (0.630). MAM0.136 (0.005) T 1234PIN 1 R N L G F D 4 PL SEATING PLANE -T- C M J B -A- DAMBAR TRIM ZONE: F THIS IS INCLUDED WITHIN DIM. "F" 8 PL 1 23 4 Y Z STYLE 1: PIN 1. GROUND 2. + OUTPUT 3. + SUPPL Y 4. - OUTPUT STYLE 2: PIN 1. V CC 2. - SUPPL Y 3. + SUPPL Y 4. GROUND STYLE 3: PIN 1. GND 2. -VOUT 3. VS 4. +VOUT DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.595 0.630 15.11 16.00 B 0.514 0.534 13.06 13.56 C 0.200 0.220 5.08 5.59 D 0.016 0.020 0.41 0.51 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC J 0.014 0.016 0.36 0.40 L 0.695 0.725 17.65 18.42 M 30˚ NOM 30˚ NOM N 0.475 0.495 12.07 12.57 R 0.430 0.450 10.92 11.43 Y 0.048 0.052 1.22 1.32 Z 0.106 0.118 2.68 3.00 CASE 344-15 ISSUE AA UNIBODY PACKAGE NOTES: DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. CONTROLLING DIMENSION: INCH. D 4 PL F U H L PORT #1 POSITIVE PRESSURE (P1) PIN 1 -A- -Q- S K G -P- SQM0.25 (0.010) T SSM0.13 (0.005) Q ST 12 34 SEATING PLANE B N R C J -T- STYLE 1: PIN 1. GROUND 2. + OUTPUT 3. + SUPPL Y 4. - OUTPUT DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.145 1.175 29.08 29.85 B 0.685 0.715 17.40 18.16 C 0.305 0.325 7.75 8.26 D 0.016 0.020 0.41 0.51 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC H 0.182 0.194 4.62 4.93 J 0.014 0.016 0.36 0.41 K 0.695 0.725 17.65 18.42 L 0.290 0.300 7.37 7.62 N 0.420 0.440 10.67 11.18 P 0.153 0.159 3.89 4.04 Q 0.153 0.159 3.89 4.04 R 0.230 0.250 5.84 6.35 S U 0.910 BSC 23.11 BSC 0.220 0.240 5.59 6.10 CASE 344B-01 ISSUE B UNIBODY PACKAGE
NOTES: DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. CONTROLLING DIMENSION: INCH. PORT #2 PORT #1 PORT #2 VACUUM (P2) (P1) SEATING PLANE SEATING PLANE K S W H L U F G D 4 PL PORT #1 POSITIVE PRESSURE -Q- 12 4 3PIN 1 -P- SSM0.13 (0.005) Q ST B N J C V R -A- STYLE 1: PIN 1. GROUND 2. + OUTPUT 3. + SUPPL Y 4. - OUTPUT DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.145 1.175 29.08 29.85 B 0.685 0.715 17.40 18.16 C 0.405 0.435 10.29 11.05 D 0.016 0.020 0.41 0.51 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC H 0.182 0.194 4.62 4.93 J 0.014 0.016 0.36 0.41 K 0.695 0.725 17.65 18.42 L 0.290 0.300 7.37 7.62 N 0.420 0.440 10.67 11.18 P 0.153 0.159 3.89 4.04 Q 0.153 0.159 3.89 4.04 R 0.063 0.083 1.60 2.11 S U 0.910 BSC 23.11 BSC V 0.248 0.278 6.30 7.06 W 0.310 0.330 7.87 8.38 0.220 0.240 5.59 6.10 CASE 344C-01 ISSUE B UNIBODY PACKAGE NOTES: DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. CONTROLLING DIMENSION: INCH. S BACK SIDE VACUUM (P2) PIN 1
4 PLD
PORT #1 POSITIVE PRESSURE (P1) SEATING PLANE 32 1 K A G F MBM0.13 (0.005) T C N R V J -B- -T- STYLE 1: PIN 1. GROUND 2. + OUTPUT 3. + SUPPL Y 4. - OUTPUT DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.690 0.720 17.53 18.28 B 0.245 0.255 6.22 6.48 C 0.780 0.820 19.81 20.82 D 0.016 0.020 0.41 0.51 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC J 0.014 0.016 0.36 0.41 K 0.345 0.375 8.76 9.53 N 0.300 0.310 7.62 7.87 R 0.178 0.186 4.52 4.72 S V 0.182 0.194 4.62 4.93 0.220 0.240 5.59 6.10 CASE 344E-01 ISSUE B UNIBODY PACKAGE
8 Freescale Semiconductor
NOTES: DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. CONTROLLING DIMENSION: INCH. E C J V -T- PORT #1 POSITIVE PRESSURE (P1) PIN 1 -P- G K MQM0.25 (0.010) T U A F S N B SPM0.13 (0.005) Q ST -Q- R 4321 DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.080 1.120 27.43 28.45 B 0.740 0.760 18.80 19.30 C 0.630 0.650 16.00 16.51 D 0.016 0.020 0.41 0.51 E 0.160 0.180 4.06 4.57 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC J 0.014 0.016 0.36 0.41 K N 0.070 0.080 1.78 2.03 P 0.150 0.160 3.81 4.06 Q 0.150 0.160 3.81 4.06 R 0.440 0.460 11.18 11.68 S 0.695 0.725 17.65 18.42 U 0.840 0.860 21.34 21.84 V 0.182 0.194 4.62 4.92 0.220 0.240 5.59 6.10 STYLE 1: PIN 1. GROUND 2. V (+) OUT 3. V SUPPL Y 4. V (-) OUT CASE 344F-01 ISSUE B UNIBODY PACKAGE
10 Freescale Semiconductor
Freescale Semiconductor 11 PACKAGE DIMENSIONS CASE 1369-01 ISSUE B SMALL OUTLINE PACKAGE PAGE 1 OF 2
12 Freescale Semiconductor
Freescale Semiconductor 13 NOTES
Rev. 11 How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284 +1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customers technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006. All rights reserved.