MPVZ5150 FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
2.5% Maximum Error over 0 ° to 85°C Ideally suited for Mi croprocessor or Microcontroller-Based Systems Patented Silicon Shear Stress Strain Gauge Easy-to-Use Chip Carrier Option Increased media compatibility fluorocarbon gel Typical Applications Level Indicators Process Control Pump/Motor Control Pressure Switching Figure 1. Fully Integrated Pressure Sensor Schematic
ORDERING INFORMATION
No. MPX Series Order Number Device Marking MPVZ5150 SERIES Ported Elements Gauge, Axial Port, SMT 482A MPVZ5150GC6T1 MPVZ5150G Gauge, Axial Port, DIP 482C MPVZ5150GC7U MPVZ5150G MPVZ5150 SERIES INTEGRATED PRESSURE SENSOR 0 to 150 kPa (0 to 21.75 PSI) 0.2 to 4.7 V Output PIN NUMBER(1) 1. Pins 1, 5, 6, 7, and 8 are internal device connections. Do not connect to external circuitry or ground. Pin1 is noted by the notch in the lead.
1 N/C 5 N/C
2 VS 6 N/C
3 GND 7 N/C
4 VOUT 8 N/C
Gain Stage # 2 and Ground Reference Shift Circuitry Pins 1 and 5 through 8 are NO CONNECTS GND Thin Film Temperature Compensation and Gain Stage # 1
2 Freescale Semiconductor
TABLE 1. Maximum Ratings(1)
- Exposure beyond the specified limits may cause permanent damage or degradation to the device.
TABLE 2. Operating Characteristics (VS = 5.0 VDC, TA = 25°C unless otherwise noted, P1 > P2. Decoupling circuit shown in
- 1 kPa (kiloPascal) equals 0.145 PSI.
- Device is ratiometric within this specified excitation range.
- Offset (V OFF) is defined as the output voltage at the minimum rated pressure.
- Full Scale Output (V FSO) is defined as the output voltage at the maximum or full rated pressure.
- Full Scale Span (V FSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the
- Accuracy (error budget) c onsists of the following:
Linearity: Output deviation from a straight line relati onship with pressure over the specified pressure range. and from the minimum or maximum operating temperature points, with zero differential pressure applied. or maximum rated pressure at 25°C. TcSpan: Output deviation over the temperature range of 0° to 85°C, relative to 25°C. TcOffset: Output deviation with minimum pressure applied ov er the temperature range of 0° to 85°C, relative to 25°C. Variation from Nominal: The variation fr om nominal values, for Offset or Full Scale Span, as a percent of VFSS at 25°C.
- Response Time is defined as the time for the incremental changed in the output to go from 10% to 90% of its final value when subjected to
a specified step change in pressure.
- Warm-Up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.
- Offset Stability is the products output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.
4 Freescale Semiconductor
Transfer Function (MPVZ5150 Series) Nominal Transfer Value: VOUT = VS x (0.006 x P(kPa) + 0.04) ± (Pressure Error x Temp. Mult. x 0.006 x VS) VS = 5.0 V ± 0.25 Vdc Temperature Error Multiplier MPVZ5150 Series Temp Multiplier 4.0 3.0 2.0 0.0 1.0 -40 -20 0 20 40 60 14012010080 - 40 3 0 to 85°C 1 +125° 3 Break Points Temperature in °C Note: The Temperature Multiplier is a linear response from 0° to -40°C and from 85° to 125°C. Pressure Error Band Pressure in kPa 3.0 2.0 1.0 -1.0 -2.0 -3.0 0.0 0 25 50 75 100 125 150 Pressure Error (max) 0 to 150 kPa ± 3.75 kPa Error (kPa) Error Limits for Pressure MPVZ5150 Series 4.0 -4.0
Figure 5. Small Outline Package Footprint TABLE 3. PRESSURE (P1)/VACUUM (P2) SIDE IDENTIFICATION TABLE
6 Freescale Semiconductor
H SEATING PLANE -T- W C M J K V DIM MIN MAX MIN MAX MILLIMETERSINCHES A 10.540.4250.415 10.79 B 10.540.4250.415 10.79 C 12.700.5200.500 13.21 D 0.960.0420.038 1.07 G 0.100 BSC 2.54 BSC H 0.002 0.010 0.05 0.25 J 0.009 0.011 0.23 0.28 K 0.061 0.071 1.55 1.80 M 0˚ 7˚ 0˚ 7˚ N 0.444 0.448 11.28 11.38 S 0.709 0.725 18.01 18.41 V 0.245 0.255 6.22 6.48 W 0.115 0.125 2.92 3.17 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5˚ TYPICAL DRAFT .S D 8 PL G SBM0.25 (0.010) A T -A- -B-N S CASE 482A-01 ISSUE A SMALL OUTLINE PACKAGE MILLIMETERSINCHES 0.100 BSC 2.54 BSC DIM A B C D G J K M N S V W MIN 0.415 0.415 0.500 0.026 0.009 0.100 0.444 0.540 0.245 0.115 MAX 0.425 0.425 0.520 0.034 0.011 0.120 15˚ 0.448 0.560 0.255 0.125 MIN 10.54 10.54 12.70 0.66 0.23 2.54 11.28 13.72 6.22 2.92 MAX 10.79 10.79 13.21 0.864 0.28 3.05 15˚ 11.38 14.22 6.48 3.17 PIN 1 IDENTIFIER K SEATING PLANE-T- W DETAIL X S G -A- -B-N C V M J D 8 PL SBM0.25 (0.010) A ST DETAIL X NOTES: DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. CONTROLLING DIMENSION: INCH. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. MAXIMUM MOLD PROTRUSION 0.15 (0.006). ALL VERTICAL SURFACES 5˚ TYPICAL DRAFT. DIMENSION S TO CENTER OF LEAD WHEN FORMED PARALLEL.
How to Reach Us: Home Page: www.freescale.com E-mail: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284 +1-800-521-6274 or +1-480-768-2130 http://www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) http://www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customers technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006. All rights reserved. MPVZ5150 Rev 0