MPVZ4006G FREESCALE | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 12

Technical content

Features

  • 2.5% Maximum Error over +10 °C to +60°C with Auto Zero
  • 5% Maximum Error over +10 °C to +60°C without Auto Zero
  • Durable Thermopl astic (PPS) Package
  • Available in Surface Mount (SMT) or Through-Hole (DIP) Configurations Application Examples
  • Washing Machine Water Level Measurement (Reference AN1950)
  • Ideally Suited for Mi croprocessor or Microcontroller-Based Systems
  • Appliance Liquid Level and Pressure Measurement
  • Respiratory Equipment

ORDERING INFORMATION

Type Options Case No. MPX Series Order No. Packing Options Marking Ported Element Surface Mount 1735-01 MPVZ4006GW6U Rails MZ4006GW Through-Hole 1560-02 MPVZ4006GW7U Rails MZ4006GW Surface Mount 482-01 MPVZ4006G6U Rails MPVZ4006G Surface Mount 482-01 MPVZ4006G6T1 Tape & Reel MPVZ4006G Through-Hole 482B-03 MPVZ4006G7U Rails MPVZ4006G J MPVZ4006G INTEGRATED PRESSURE SENSOR 0 to 6 kPa (0 to 612 mm H2O) 0.3 to 4.6 V OUTPUT PIN NUMBERS(1) 1. Pins 1, 5, 6, 7, and 8 are internal device connections. Do not connect to external circuitry or ground. Pin 1 is noted by the notch in the lead.

1 N/C 5 N/C

2 VS 6 N/C

3 Gnd 7 N/C

4 Vout 8 N/C

2 Freescale Semiconductor

Figure 1. Fully Integrated Pressure Sensor Schematic Table 1. Maximum Ratings(1)

  1. Exposure beyond the specified limits may cause permanent damage or degradation to the device.

Table 2. Operating Characteristics (VS = 5.0 Vdc, TA = 25°C unless otherwise noted, P1 > P2)

  1. Device is ratiometric within this specified excitation range.
  2. Full Scale Span (V FSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the
  3. Offset (V off) is defined as the output voltage at the minimum rated pressure.
  4. Accuracy (error budget) consists of the following:
  • Linearity: Output deviation from a straight line relations hip with pressure over the specified pressure range.
  • Temperature Hysteresis: Output deviation at any temperature with in the operating temperature range, after the temperature is cycled to and from the minimum or maximum operating temperature points, with zero differential pressure applied.
  • Pressure Hysteresis: Output deviation at any pressure within t he specified range, when this pressure is cycled to and from minimum or maximum rated pressure, at 25°C.
  • Offset Stability: Output deviation, after 1000 temperature cycles, -30 to 100°C, and 1.5 million pressure cycles, with minimum rated pressure applied.
  • TcSpan: Output deviation over the temperature range of 10 ° to 60°C, relative to 25°C.
  • TcOffset: Output deviation with minimum pressure applied, over the temperature range of 10° to 60°C, relative to 25°C. 5. Auto Zero at Factory Installation: Due to the sensitivity of the MPVZ4006G, external mechanical stresses and mounting position can affect the zero pressure output reading. To obtain the 2.46% FSS accuracy, the device output must be “autozeroed'' after installation. Autozeroing is defined as storing the zero pressure output reading and subtracting this from the device's output during normal operations. The specified accuracy assumes a maximum temperature change of ±5°C between autozero and measurement. ±2.46 ±5.0 %VFSS with auto zero %VFSS without auto zero Sensing Element GND Vout VS Pins 1, 5, 6, 7, and 8 are NO CONNECTS Thin Film Temperature Compensation and Gain Stage #1 Gain Stage #2 and Ground Reference Shift Circuitry for small outline package device

4 Freescale Semiconductor

shorting between solder pads. Figure 6. SOP Footprint (Case 482) Table 3. Pressure (P1)/Vacuum (P2) Side Identification Table

0.060 TYP 8X

0.100 TYP 8X

0.100 TYP

S D 8 PL G SBM0.25 (0.010) A ST -A- -B- N C M J K PIN 1 IDENTIFIER H SEATING PLANE -T- DIM MIN MAX MIN MAX MILLIMETERSINCHES A 10.540.4250.415 10.79 B 10.540.4250.415 10.79 C 5.380.2300.212 5.84 D 0.960.0420.038 1.07 G 0.100 BSC 2.54 BSC H 0.002 0.010 0.05 0.25 J 0.009 0.011 0.23 0.28 K 0.061 0.071 1.55 1.80 M 0˚ 7˚ 0˚ 7˚ N 0.405 0.415 10.29 10.54 S 0.709 0.725 18.01 18.41 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5˚ TYPICAL DRAFT . CASE 482-01 ISSUE O SMALL OUTLINE PACKAGE MILLIMETERSINCHES 0.100 BSC 2.54 BSC DIM A B C D G J K M N S MIN 0.415 0.415 0.210 0.026 0.009 0.100 0.405 0.540 MAX 0.425 0.425 0.220 0.034 0.011 0.120 15˚ 0.415 0.560 MIN 10.54 10.54 5.33 0.66 0.23 2.54 10.29 13.72 MAX 10.79 10.79 5.59 0.864 0.28 3.05 15˚ 10.54 14.22 PIN 1 IDENTIFIER K SEATING PLANE-T- DETAIL X S G -A- -B- C M J N D 8 PL SBM0.25 (0.010) A ST DETAIL X NOTES: DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. CONTROLLING DIMENSION: INCH. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. MAXIMUM MOLD PROTRUSION 0.15 (0.006). ALL VERTICAL SURFACES 5˚ TYPICAL DRAFT. DIMENSION S TO CENTER OF LEAD WHEN FORMED PARALLEL. CASE 482B-03 ISSUE B SMALL OUTLINE PACKAGE MPVZ4006G Sensors Freescale Semiconductor 5

6 Freescale Semiconductor

8 Freescale Semiconductor

10 Freescale Semiconductor

Freescale Semiconductor 11 PACKAGE DIMENSIONS PAGE 3 OF 3 CASE 1735-01 ISSUE A SMALL OUTLINE PACKAGE

Rev. 2 How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516

2100 East Elliot Road

Tempe, Arizona 85284 +1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center

2 Dai King Street

Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2008. All rights reserved. RoHS-compliant and/or Pb-free versions of Freescale products have the functionality and electrical characteristics of their non-RoHS-compliant and/or non-Pb-free counterparts. For further information, see http:/www.freescale.com or contact your Freescale sales representative. For information on Freescale’s Environmental Products program, go to http://www.freescale.com/epp.