MPQ2013-AEC1

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

40V, 150mA, Low Quiescent Current Linear Regulator without EN Pin, MPQ2013A-AEC1 with EN Pin MPQ2013 Rev. 1.2 www.MonolithicPower.com 1 5/24/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved.

DESCRIPTION

The MPQ2013 is a low power linear regulator that supplies power to systems with high voltage batteries. It includes a wide 2.5V to 40V input range, low dropout voltage and low quiescent supply current. The low quiescent current and low dropout voltage allow operations at extremely low power levels. Therefore, the MPQ2013 are ideal for the low power microcontrollers and the battery-powered equipments. The MPQ2013 provides wide variety of fixed output voltage options (if request): 1.8V, 1.9V, provides the output adjustable option ( from 1.215V to 15V). The regulator output current is internally limited and the device is protected against over-load and over-temperature conditions. The MPQ2013 also includes thermal shutdown and current limiting fault protection, and is available in QFN8 (3x3mm) package.

FEATURES

• 2.5V to 40V Input Range
• 3.2µA Quiescent Supply Current
• Stable With low-value output ceramic capacitor (> 0.47 μF)
• 150mA specified current
• 620mV Dropout at 150mA Load
• Available in Fixed and Adjustable output (1.215 V to 15 V) versions
• Output ±2% Accuracy
• Specified current limit
• Thermal Shutdown
• -40°C to +125°C Specified Junction Temperature Range
• Available in QFN8 (3x3mm) Package
• Available in AEC-Q100 Grade 1

APPLICATIONS

• Industrial/Automotive Applications
• Portable/Battery-Powered Equipment
• Ultra low power Microcontrollers
• Cellular Handsets
• Medical Imaging All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION IN1 OUT IN2 FB GND Vout IN1 OUT IN2 GND FB VOUT Output Adjustable Version Output Fixed Version

MPQ2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR, AEC-Q100 QUALIFIED MPQ2013 Rev. 1.2 www.MonolithicPower.com 2 5/24/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved.

ORDERING INFORMATION

Part Number* Package Top Marking MPQ2013GQ QFN-8 (3mmx3mm) AFF MPQ2013GQ-33 QFN-8 (3mmx3mm) AGG MPQ2013GQ-AEC1 QFN-8 (3mmx3mm) AFF MPQ2013GQ-33-AEC1 QFN-8 (3mmx3mm) AGG * For Tape & Reel, add suffix –Z (e.g. MPQ2013GQ–Z) ** Pre-release PACKAGE REFERENCE QFN-8(3mmx3mm) ABSOLUTE MAXIMUM RATINGS (1) Continuous Power Dissipation (TA = +25°C) (2) ESD SUSCEPTIBILITY (3) Recommended Operating Conditions (4) Operating Junction Temp. (TJ). -40°C to +125°C Thermal Resistance (5) θJA θJC Notes: 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the maximum junction temperature T J (MAX), the junction- to- ambient thermal resistance θ JA, and the ambient te mperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by P D (MAX) = (T J (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go int o thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) Devices are ESD sensitive. Handling precaution recommended. 4) The device is not guaranteed to function outside of its operating conditions. 5) Measured on JESD51-7, 4-layer PCB.

MPQ2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR, AEC-Q100 QUALIFIED MPQ2013 Rev. 1.2 www.MonolithicPower.com 3 5/24/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved.

ELECTRICAL CHARACTERISTICS

Over operating junction temperature range (TJ = –40°C to +125°C), VOUT(NOM) = 5V (VIN≥6V) or FB (VIN<6V) for MPQ2013, VOUT(NOM) = 3.3V (VIN≥4.3V) or FB (VIN<4.3V) for MPQ2013-33, IOUT = 1mA, COUT = 1μF, unless otherwise noted. Typical values are at TJ = +25°C. Parameter Symbol Condition Min Typ Max Units Input Voltage VIN 2.5 40 V Output Voltage range VOUT 1.215 15 V GND Pin Current IGND MPQ2013GQ, 0<IOUT<1mA, VIN=2.5V to 40V 3.2 9 µA 1mA<IOUT<30mA, VIN=2.5V to 15V 14 22 30mA<IOUT<150mA, VIN=3V to 6V 35 50 MPQ2013GQ-33 0<IOUT<1mA, VIN=4.3V to 40V 4.4 10 1mA<IOUT<30mA, VIN=4.3V to 15V 15 25 30mA<IOUT<150mA, VIN=4.3V 35 50 Load Current Limit ILIMIT VOUT = 0V, VIN=6V to 15V 160 270 400 mA Output Voltage Accuracy MPQ2013-33, VIN=4.3V, IO=0 3.234 3.3 3.366 V FB Voltage VFB FB = OUT, VIN=5V 1.191 1.215 1.239 V Dropout Voltage VIN=VOUT(NOM)-0.1V VDROPOUT MPQ2013GQ ILOAD = 150mA, VOUT(NOM)=5V 620 900 mV MPQ2013GQ-33, ILOAD = 150mA 740 1100 FB Pin Input Current IFB MPQ2013, VFB = 1.3V, VIN=6V,OUT floating –50 +4 +50 nA MPQ2013-33,VFB = 1.3V, VIN=6V,OUT floating 0.88 1.3 1.72 μA Line Regulation(6) VIN = 2.5 to 40V, ILOAD = 1mA, OUT = FB 0.01 0.05 %/V Load Regulation(7) MPQ2013GQ ILOAD = 1 00μA to 150 mA, OUT = FB , VIN=3V to 6V 0.003 0.005 %/mA MPQ2013GQ-33, ILOAD = 1 00μA to 150mA, VIN=4.3V to 6V 0.005 0.015 Output Voltage PSRR(8) 100Hz, CIN = 100pF, COUT = 4.7μF ILOAD=10mA, VIN1= VIN2=6V 58 dB 1kHz, CIN = 100pF, COUT = 4.7μF ILOAD=10mA, VIN1= VIN2=6V 41 dB 100kHz, CIN = 100pF, COUT = 4.7μF ILOAD=10mA, VIN1= VIN2=6V 55 dB

MPQ2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR, AEC-Q100 QUALIFIED MPQ2013 Rev. 1.2 www.MonolithicPower.com 4 5/24/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. ELECTRICAL CHARACTERISTICS (continued) Over operating junction temperature range (TJ = –40°C to +125°C), VOUT(NOM) = 5V (VIN≥6V) or FB (VIN<6V) for MPQ2013, VOUT(NOM) = 3.3V (VIN≥4.3V) or FB (VIN<4.3V) for MPQ2013-33, IOUT = 1mA, COUT = 1μF, unless otherwise noted. Typical values are at TJ = +25°C. Parameter Symbol Condition Min Typ Max Units Startup Response Time RLOAD=500Ω, COUT=6.8µF, VOUT = 3.3V 1.8 ms VOUT = 5V 3 Thermal Shutdown(8) TSD 150 165 °C Thermal Shutdown Hysteresis(8) ΔTSD 20 °C Notes: 6) Line Regulation= IN(MAX) IN(MIN)OUT[V ] OUT[V ] IN(MAX) IN(MIN) OUT(NOM) |V V | (%/ V)(V V ) V ×−× 7) Load Regulation= OUT(MAX ) OUT(MIN)OUT[I ] OUT[I ] OUT(MAX) OUT(MIN) OUT(NOM) |V V | (%/ mA)(I I ) V ×−× 8) Derived from bench characterization. Not tested in production.

MPQ2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR, AEC-Q100 QUALIFIED MPQ2013 Rev. 1.2 www.MonolithicPower.com 5 5/24/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. PIN FUNCTIONS Pin # Name Description 1 IN1 Input Voltage. Connect a 2.5V to 40V supply to this pin. 2 IN2 VIN pin to power internal logic. Connect to IN1. exposed pad GND Ground (the exposed pad and GND pin must be connected to the same ground plane) 5 FB Feedback input pin, regulated to 1.215V nominally. Connected to an external resistive divider between OUT and GND to set output voltage. For fixed output version, this pin can be just float. 8 OUT Regulated output voltage, only low -value ceramic capacitor (≥ 0.47μF) on output is required for stability. 3, 6, 7 NC No connection. May be left open or tied to Ground for impro ved thermal performance.

MPQ2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR, AEC-Q100 QUALIFIED MPQ2013 Rev. 1.2 www.MonolithicPower.com 6 5/24/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. TYPICAL CHARACTERISTICS

MPQ2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR, AEC-Q100 QUALIFIED MPQ2013 Rev. 1.2 www.MonolithicPower.com 7 5/24/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. TYPICAL PERFORMANCE CHARACTERISTICS CIN = 1μF, COUT = 4.7μF, VOUT=5V, TA = +25ºC, unless otherwise noted

MPQ2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR, AEC-Q100 QUALIFIED MPQ2013 Rev. 1.2 www.MonolithicPower.com 8 5/24/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. TYPICAL PERFORMANCE CHARACTERISTICS (continued) CIN = 1μF, COUT = 4.7μF, VOUT=5V, TA = +25ºC, unless otherwise noted

MPQ2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR, AEC-Q100 QUALIFIED MPQ2013 Rev. 1.2 www.MonolithicPower.com 9 5/24/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. OPERATION The MPQ2013 is a linear regulator that supplies power to systems with high voltage batteries. It includes a wide 2.5V to 4 0V input range, low dropout voltage and low quiescent supply current. The MPQ2013 provides wide vari ety of fixed output voltage options: 1.8V, 1.9V, 2.3V, 2.5V, 3.0V, 3.3V, 3.45V, 5.0V; and also provides the output adjustable option (from 1.215V to 15V). The output adjustable version has an output that is adjustable from 1.215V to 15V with a simple resis tor divider. It uses external feedback, allowing the user to set the output voltage with an external resistor divider. The typical FB pin voltage is 1.215V. The regulator output current is internally limited and the device is protected against over-load and over-temperature conditions. The peak output current is limited to around 270mA, which exceeds the 150mA recommended continuous output current. When the junction temperature is too high, the thermal sensor sends a signal to the control logic that will shutdown the IC. The IC will restart when the temperature has sufficiently cooled. The maximum power output current is a function of the package’s maximum power dissipation for a given temperature. The maximum power dissipation is dependent on the thermal resistance of the case and the circuit board, the temperature difference between the die junction and the ambient air, and the rate of air flow. The GND pin and Exposed Pad must be connected to the ground plane for proper dissipation. UVLO Vreference EA VIN1 VIN2 VOUT FBGND For fixed output version only Figure 1: Functional Block Diagram

MPQ2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR, AEC-Q100 QUALIFIED NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications. Users should warrant and guarantee that third party I ntellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. MPQ2013 Rev. 1.2 www.MonolithicPower.com 13 5/24/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved.

PACKAGE INFORMATION

QFN-8 (3mmx3mm) SIDE VIEW TOP VIEW 5 4 BOTTOM VIEW 2.90 3.10 1.45 1.75 2.90 3.10 2.25 2.55 0.65 BSC 0.20 0.30 0.80 1.00 0.00 0.05

0.20 REF

1.70 0.65 0.25 RECOMMENDED LAND PATTERN

2.90 NOTE:

1) ALL DIMENSIONS ARE IN MILLIMETERS. 2) EXPOSED PADDLE SIZE DOES NOT INCLUDE MOLD FLASH. 3) LEAD COPLANARITY SHALL BE 0.10 MILLIMETER MAX. 4) JEDEC REFERENCE IS MO-229, VARIATION VEEC-2. 5) DRAWING IS NOT TO SCALE. PIN 1 ID SEE DETAIL A 2.50 0.70 PIN 1 ID OPTION B R0.20 TYP. PIN 1 ID OPTION A 0.30x45º TYP. DETAIL A 0.30 0.50 PIN 1 ID INDEX AREA