DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Parameters Min. Typical Max. Unit. Operating Wavelength Single Mode 1310 1620 nm Multi-mode 850 1310 MPO Insertion Loss Single Mode 0.6 dBSingle Mode Low Loss 0.3 0.35 Multi-mode 0.75 Single Fiber Insertion Loss (Fan-out side) Single Mode 0.2 dBSingle Mode Low Loss 0.3 Multi-mode 0.3 Return Loss Single Mode 50 dBSingle Mode Low Loss 60 Multi-mode 30 Operating Temperature - 20 + 70 °C Fiber Type SM ITU-T G652 and IEC 60793-2-50 B1.3 SM ITU-T G657A2/B2 and IEC 60793-2-50 B1.6A OM3 ISO/IEC 11801 and IEC 60793-2-10 Ala.2 Cable Jacket Type Ribbon / Fan-out LSZH Cable Jacket Color Yellow G652 and G657 Single mode fiber Orange OM2 Multi-mode fiber Aqua OM3 fiber Flammability Rating IEC-60332-1, IEC-61034, IEC-60754-1 and 2 Note: 1) IL is tested in room temperature. 2) Total IL is MPO IL + all Fan-out side IL. 3) Tested at 1310nm and 1550nm for single-mode jumper, 850nm and 1310nm for multi-mode jumper. S0229 - R02. 20110721 MPO/MTP Fan-out Patchcord MPOF Series Oplink’s MPO/MTP multi-fiber cabling system is ideally suited for a high density environment that demands space saving and innova- tive cable management solutions. MPO/MTP fan-out supports vari- ous connections from multi-fiber to single-fiber out. We also offer various other MPO/MTP products such as MPO/MTP cassettes, modules and enclosures. These cassettes provide secure transi- tion between MPO/MTP and LC or SC connections.  Optical System Access Network  Telecommunications networks  Broadband/CATV networks  Data communications networks, including high-bandwidth equipment  Improves and simplifies fiber routing  Decreases fiber management space  OEM or customized for special applications  Low insertion loss and reflectance  High Density  Snap-In cassette panel for easy installation, removal and expansion

Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules 46335 Landing Pkwy Fremont, CA 94538 T el: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com MPO/MTP Fan-out Patchcord MPOF Series S0229 - R02. 20110721

Ordering Information

Note: Fiber length is tip to tip MTP/MTP Connector Guide Pin 1 Guide Pin 2 Ribbon cable (Male/Female) Fanout KitKey Cable Length "L" Fanout Length *Note: Cable Length is tip to tip Bare Fiber Color No. 8 Ribbon Fiber No. 12 Ribbon Fiber No. 24 Ribbon Fiber

1 Blue 1 Blue 1/13 Blue

2 Orange 2 Orange 2/14 Orange

3 Green 3 Green 3/15 Green

4 Brown 4 Brown 4/16 Brown

5 Gray 5 Gray 5/17 Gray

6 White 6 White 6/18 White

7 Red 7 Red 7/19 Red

8 Black 8 Black 8/20 Black

9 Yellow 9/21 Yellow

10 Violet 10/22 Violet

11 Pink 11/23 Pink

12 Aqua 12/24 Aqua

Cable Jacket Color: SMF: Yellow, MMF OM1/OM2: Orange, MMF OM3/OM4: Aqua Fiber T ype 1 = Single mode 2 = MMF 50/125 3 = MMF 62.5/125 4 = OM3 50/125 5 = OM4 50/125 Fan-out Jacket MPO Fiber Count MPO Connector Connector A (MPO Side) Fan-out Connector B = Bare fiber F = Flat cable R = Round cable 1 = 8 fiber 2 = 12 fiber 3 = 24 fiber 0 = None M = Male F = Female 0 = None 1 = MPO/MTP 2 = MPO/MTP (Low Loss) 1 = None 2 = FC/PC 4 = FC/APC 5 = SC/PC 7 = SC/APC 8 = ST 9 = LC/PC A = MU/PC B = LC/APC Fan-out LengthCable Length 01 = 1 inch 02 = 2 inch 10 = 10 inch 99 = 99 inch 01 = 1 m 05 = 5 m 10 = 10 m 20 = 20 m 99 = 99 m 1 = 900µm 2 = 2.0mm 3 = 250µm Cable T ype