MPF CRYDOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
- SIP SSR
- Ratings to 4A @ 280 VAC
- SCR output for heavy industrial loads
- DC control
- Zero-crossin g (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage Zero Crossing Random Fire 4-10 VDC MPF240D4 MPF240D4R OUTPUT SPECIFICATIONS (1) Description MPF240D4 MPF240D4R Operating Voltage (47-63Hz) [Vrms] 12-280 12-280 Transient Overvoltage [Vpk] 600 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) 500 500 Maximum Load Current [Arms] 4 4 Minimum Load Current [Arms] 0.1 0.1 Maximum Surge Current (16.6ms) [Apk] 40 40 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.5 1.5 Minimum Power Factor (with Maximum Load) 0.5 0.5 INPUT SPECIFICATIONS (1) Description MPF240D4 MPF240D4R Control Voltage Range 4-10 VDC 4-10 VDC Must Turn On Voltage 4.0 VDC 4.0 VDC Must Turn Off Voltage 1.0 VDC 1.0 VDC Typical Input Current @ 5 VDC 15 mAdc 15 mAdc Nominal Input Impedance 300 Ohm 300 Ohm Maximum Turn-On Time [msec] 1/2 Cycle 0.1 Maximum Turn-Off Time msec] 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz)(2) 3750 Vrms Minimum Insulation Resistance (@ 500 VDC)(2) 10 9 Ohm Maximum Capacitance, Input/Output 8.0 pF Ambient Operating Temperature Range -30 to 80°C Ambient Storage Temperature Range -30 to 125°C Weight (typical) 0.6 oz. (17g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwi se specified. 2) Dielectric and insulation resistance are measured are between input and output 3) Off-State dv/dt test method per EIA/NARM standard RS-443
THERMAL DERATE INFORMATION AGENCY APPROVALS UL E116950 CSA LR81689 Rev. 011309
ANNEX - ENVIROMENTAL INFORMATION