MPF3230RSAI ETC2 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Specifications are subject to change without notice (12.09.2005) 1 Photoelectrics Through-beam System, Relay Output Product Description Ordering Key Type Number of channels Voltage supply Output relay Safety Adjustable sensitivity Inverted test input (break) The MPFRS.. is a family of inexpensive general purpose photoelectric sensors in 3 dif- ferent types of housings with separate amplifier. They are designed to meet the require- ments for industrial doors and gates. The “Snap-ON” photo switch can be mounted in material with a thickness from 0.6 mm and up to 2.25 mm. The sensor set is easy to use and no adjustments are nec- essary. The amplifier has a test input designed to disable the emitters and therefore evaluate the sensor function. Multiplexed channels prevent cross-talk between each set of photosensors. The ampli- fiers are available with the fol- lowing voltages: 12-24 VAC/DC, 115 VAC and 230 VAC. The output is made as positive security e.g. power lost, short-circuit or broken sensor cable makes the relay go to off state.

  • Industrial doors and gates
  • Range: 15 m
  • Modulated infrared light
  • Option with individually adjustable channel sensitivity
  • Amplifier with “Snap-ON” photoelectric switches
  • Supply voltage: 12-24 VAC/DC, 115 VAC or 230 VAC
  • Output: SPST relay
  • LED indications for light ON and supply ON
  • 4 module M36 DIN rail housing
  • Ø12 mm “Snap-ON”, Ø18 or M14 photoelectric housing
  • 1, 2 or 3 multiplexed channels
  • With make or break test input
  • UL 325, EN 12453 (TÜV approved) Type Selection, Amplifier Housing Ordering no. Ordering no. Ordering no. W x H x D Supply: 12-24 VAC/DC Supply: 115 VAC Supply: 230 VAC 70 x 57 x 86 mm MPF1-912 RS MPF1-115 RS MPF1-230 RS MPF2-912 RS MPF2-115 RS MPF2-230 RS MPF3-912 RS MPF3-115 RS MPF3-230 RS MPF1-912 RSI *) MPF1-115 RSI *) MPF1-230 RSI *) MPF2-912 RSI *) MPF2-115 RSI *) MPF2-230 RSI *) MPF3-912 RSI *) MPF3-115 RSI *) MPF3-230 RSI *) MPF1-912 RSA *) MPF1-115 RSA *) MPF1-230 RSA *) MPF2-912 RSA *) MPF2-115 RSAv MPF2-230 RSA MPF3-912 RSA *) MPF3-115 RSA *) MPF3-230 RSA *) MPF1-912 RSAI *) MPF1-115 RSAI *) MPF1-230 RSAI *) MPF2-912 RSAI *) MPF2-115 RSAI *) MPF2-230 RSAI *) MPF3-912 RSAI *) MPF3-115 RSAI *) MPF3-230 RSAI *) *) Products available on request Type MPF.RS Type Emitter Range Housing diameter Optical angle Connectors on cable Housing Rated Optical Ordering no. Ordering no. Ordering no. diameter operational angle Emitter Receiver Fitting distance (S Ø12 mm 15 m 4° MPFT 15-4 MPFR-4 M14 15 m 4° MPFT 15-M14-4 MPFR-M14-4 D18 15 m 4° MPFT 15-D18-4 MPFR-D18-4 Ø12 mm 15 m 4° MPFT 15-4C MPFR-4C M14 15 m 4° MPFT 15-M14-4C MPFR-M14-4C D18 15 m 4° MPFT 15-D18-4C MPFR-D18-4C Fitting for Ø12 AMPF-MB1 Type Selection, Photoelectric Switch Sensor Amplifier MPF 3 230 RS AI MPF T 15 M14 4C

2 Specifications are subject to change without notice (12.09.2005) MPFRS Rated operation dist. (Sn) 15 m - 8 m (UL 325) Light source LED 880 nm Light type Infrared modulated Ambient light > 20.000 lux Housing material MPFT15-4/C MPFT15-D18-4/C MPFR-4/C MPFR-D18-4/C Housing PC Backpart ABS MPFT15-M14-4/C MPFR15-M14-4/C Housing Stainless steel/PC Backpart PTE Connection MPFT15-XXX-4 MPFR15-XXX-4 Cable PVC, grey, 10 m, Ø 2.9 mm2 Specifications, Photoelectric Switches Specifications, Amplifier Output function MPF1+2 Relay 2 x SPST MPF3 Relay 2 x SPST + 2 x SPST Indication function Supply ON LED, green Beam ON (no object present) LED, yellow Environment Overvoltage category III (IEC 66064) Degree of protection IP 40 (IEC 60529/60947-5-2) Pollution degree 3 (IEC 60664/60664A, 60947-1) Temperature Operating -20° to +60°C (-4° to +140°F) Storage -30° to +80°C (-22° to +176°F) Connection Screw terminals (max. 2.5 mm2) Protection output Reverse output, transients, short-circuit Test input MPF .- 230 RS. Potential-free contact MPF .- 115 RS. Potential-free contact MPF .- 912 RS. M ax. 28 V@15 mA AC/DC Testfunction activated ≥3.5 V AC/DC Testfunction deactivated ≤1.0 V AC/DC MPF.- 912 RSI. Max. 28 V@15 mA AC/DC Testfunction deactivated ≥3.5 V AC/DC Testfunction activated ≤1.0 V AC/DC Housing material PC Weight MPF .- 115/230 RS 280 g MPF .- 912 RS 126 g CE-marking Yes UL-marking Yes (UL 508, UL 325) TÛV-marking Yes (EN 12453) Rated operational volt. AC types (UB) Terminals 1 & 3 MPF .- 230 RS.

230 VAC ± 15%, 50 to 60 Hz

MPF .- 115 RS. 115 VAC ± 15%, 50 to 60 Hz MPF .- 912 RS. 12-24 VAC/DC ± 15%, 50 to 60 Hz Dielectric voltage MPF .- 230 RS. 4 kVAC (rms) Rated impulse withstand volt. 4 kV (1.2/50 μs) Rated operational power MPF.- 912 RS AC supply 3 VA DC supply 2 W MPF.- 115/230 RS AC supply max. 4.5 VA DC supply max. 4.5 VA Output Specifications Resistive load MPF .-xxx RS, RSA, RSI, RSAI 600.000 switchings 1 A@250 VAC/30 VDC 300.000 switchings 2 A@250 VAC/30 VDC 100.000 switchings 2 A@250 VAC/30 VDC (UL) AC15 0.75 A@240 VAC AC14 0.60 A@120 VAC DC13 0.22 A@125 VDC Rated insulation volt. (Ui) MPF .- 230 RS. 250 VAC (rms) MPF .- 115 RS. 120 VAC (rms) MPF .- 912 RS. 50 VAC (rms), 50 VDC Operating frequency (f) Light/dark ratio 1:1 Contact output 10 Hz Response time OFF-ON (tON) ≤ 50 ms ON-OFF (tOFF) ≤ 40 ms Power ON delay (tv) ≤ 300 ms MPFT15-XXX-4C Red connector pair MPFR15-XXX-4C White connector pair Connector is placed 15 cm from sensorhead Cable PVC, grey, 10 m, Ø 2.9 mm2 Degree of protection IP 67 (IEC 60529/60947-5-2) Mounting “Snap-ON” Ø12 mm or fitting MPFT15-4/C MPFR-4/C Rubber profile D18 MPFT15-D18-4/C MPFR-D18-4/C Threaded barrel M14 MPFT15-M14-4/C MPFR-M14-4/C CE-marking Yes UL-marking Yes (UL 508, UL 325) TÛV-marking Yes (EN 12453)

Specifications are subject to change without notice (12.09.2005) 3 Tv Toff Ton Ton Operation Diagram Output contact closed Object present Power supply Wiring Diagrams MPFRS EMITTER OUT 3 OUT 1+2 TESTRECEIVER 3 12 21 3 SUPPLY 230 V 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 10 11 12 TX3 TX2 TX1 RX1 RX2 RX3 - + TP TP

250 VAC

30 VDC

Max. 2 A TEST 23 24 AC/DC TEST 23 24 AC/DC TEST 23 24 DC TEST 23 24 DC Test input make, shown for 912 version Test input make, shown for 115/230 version OUT 3 TEST 3 12 21 3 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 10 11 12 TX3 TX2 TX1 RX1 RX2 RX3 TP TP Max. 2 A 1) 2) 2) 1) EMITTER RECEIVER RD RD BK RD BK BK BU BK BU BU SUPPLY 115/230 V OUT 2 1 Test input break, shown for 115/230 version TEST 23 24 DC TEST 23 24 DC Test input break, shown for 912 version 1) Not MPF1 and MPF2 2) Not MPF1 1) Not MPF1 and MPF2 2) Not MPF1 TEST 23 24 AC/DC TEST 23 24 AC/DC

4 Specifications are subject to change without notice (12.09.2005) MPFRS Excess Gain 100 1000 1000 10000 100000 Range [mm] Excess gain Detection Diagram -20 -40 -60 0 4 8 12 16 20 Sensing Range (m) (cm) (feet) 23.8 15.7 7.9 -7.9 -15.7 -23.8 (inch) YX Emitter Receiver Dimensions 5770

86 MPF3-230RS

Ø15 Ø2.9 Ø11.8 17.3 2.6 0.6 - 2.25 mmØ12 Ø2.9 Ø10 5 20 2.6 M14 x 1 27.6 Ø12.8 Ø2.9 Ø17.5 Ø22 8.1 28.3 33.2 Ø12 M14 D18Fitting for Ø12 Amplifier To be mounted in material with a thickness of 0.6 - 2.25 mm Max. Rating

Specifications are subject to change without notice (12.09.2005) 5 Delivery Contents

  • Amplifier, MPF ..
  • Installation instruction
  • Packaging: cardboard box Installation Hints Relief of cable strain Protection of the sensing face Switch mounted on mobile carrierTo avoid interference from inductive voltage/ current peaks, separate the prox. switch pow- er cables from any other power cables, e.g. motor, contactor or solenoid cables Incorrect Correct The cable should not be pulled A proximity switch should not serve as mechanical stop Any repetitive flexing of the cable should be avoided