MPE1205S-1W MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

  • Continuous short-circuit protection
  • No-load input current as low as 8mA
  • Operating ambient temperature range: -40°C to +105°C
  • High efficiency up to 81%
  • I/O isolation test voltage: 3k VDC
  • Industry standard pin-out 1W isolated DC-DC converter Fixed input voltage, unregulated Dual/Single output These series are specially designed for applications where two isolated voltage is required in a distributed power supply system. They are suitable for: pure digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits. Selection Guide Part Number Input Voltage (VDC) Output Full Load Efficiency (%) Min./Typ. Capacitive Load(μF)* Max.Nominal (Range) Voltage (VDC) Current (mA) Max./Min. MPE1203S-1W (10.8 to 13.2) 1200 MPE1205S-1W ±5 ±100/±10 76/80 MPE1212S-1W ±12 ±42/±5 77/81 220 MPE1215S-1W ±15 ±34/±4 77/81 MPE1224S-1W ±24 ±21/±2 76/80 100 MPF1203S-1W 3.3 303/30 71/75 2400 MPF1205S-1W 5 200/20 76/80 MPF1209S-1W 9 111/12 76/80 1000 MPF1212S-1W 12 83/9 76/80 560 MPF1215S-1W 15 67/7 77/81 MPF1224S-1W 24 42/5 77/81 220 MPE1505S-1W (13.5 to 16.5) ±5 ±100/±10 76/80 1200 MPE1512S-1W ±12 ±42/±5 76/80 220 MPE1515S-1W ±15 ±34/±4 77/81 MPF1505S-1W 5 200/20 76/80 2400 MPF1509S-1W 9 111/12 76/80 1000 MPF1512S-1W 12 83/9 76/80 560 MPF1515S-1W 15 67/7 77/81 MPE2405S-1W (21.6 to 26.4) ±5 ±100/±10 74/80 1200 MPE2412S-1W ±12 ±42/±5 75/81 220 MPE2415S-1W ±15 ±34/±4 73/79 MPE2424S-1W ±24 ±21/±2 74/80 100 MPF2403S-1W 3.3 303/30 69/75 2400 MPF2405S-1W 5 200/20 73/79 MPF2409S-1W 9 111/12 74/80 1000 MPF2412S-1W 12 83/9 75/81 560 MPF2415S-1W 15 67/7 75/81 MPF2424S-1W 24 42/5 75/81 220 Note: *The specified maximum capacitive load for positive and negative output is identical.

Page <2> V1.026/02/21 1W Isolated DC to DC Converters Single and Dual Output Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Output Specifications Item Operating Conditions Min. Typ. Max. Unit Voltage Accuracy See output regulation curves (Fig. 1) Linear Regulation Input voltage change: ±1% 3.3VDC output - 1.5 Others - 1.2 Load Regulation 10% -100% load 3.3VDC output 15 20 %5VDC output 10 15 Others 8 10 Ripple & Noise* 20MHz bandwidth 24VDC output 50 100 mVp-p Others 30 75 Temperature Coefficient Full load ±0.02 - %/°C Short-Circuit Protection Continuous, self-recovery Note: * The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Current (full load / no-load) Input Current (full load / no-load) 12V input - 112/8 118/-- mA 15V input - 84/8 88/-- 24V input - 56/8 59/-- Reflected Ripple Current* - 30 -- Surge Voltage(1sec. max.) 12VDC input -0.7 - V DC15VDC input 21 24VDC input 30 Input Filter Capacitance filter Hot Plug Unavailable Note: * Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation.

Page <3> V1.026/02/21 1W Isolated DC to DC Converters Single and Dual Output Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output electric strength test for 1 minute with a leakage current of 1mA max. 3000 - - VDC Insulation Resistance Input-output resistance at 500VDC 1000 - - MΩ Isolation Capacitance Input-output capacitance at 100kHz/0.1V - 20 - pF Operating Temperature Derating when operating temperature≥85°C, (see Fig. 2) -40 - 105 Storage Temperature -55 - 125 Case Temperature Rise Ta=25°C - 30 - Pin Soldering Resistance Temperature Soldering spot is 1.5mm away from case for 10 seconds - - 300 Storage Humidity Non-condensing 5 - 95 Vibration 10-150Hz, 5G, 30 Min. along X, Y and Z Switching Frequency Full load, nominal input voltage - 260 - kHz MTBF MIL-HDBK-217F@25°C 3500 - - k hours Mechanical Specifications Case Material Black plastic; flame-retardant and heat-resistant (UL94 V-0) Dimensions 19.65 x 6 x 10.16mm Weight 2.1g(Typ.) Cooling Method Free air convection Electromagnetic Compatibility (EMC) Emissions CE CISPR32/EN55032 CLASS B (see Fig. 4 for recommended circuit) RE CISPR32/EN55032 CLASS B (see Fig. 4 for recommended circuit) Immunity ESD IEC/EN61000-4-2 Contact ±6kV perf. Criteria B

Page <4> V1.026/02/21 1W Isolated DC to DC Converters Single and Dual Output Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Typical Performance Curves MPE1205S-1W MPE1205S-1W MPF2405S-1W MPF2405S-1W

Page <5> V1.026/02/21 1W Isolated DC to DC Converters Single and Dual Output Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Design Reference Typical application Input and/or output ripple can be further reduced, by connecting a filter capacitor from the input and/or output terminals to ground as shown in Fig.3. Choosing suitable filter capacitor values is very important for a smooth operation of the modules, particularly to avoid start-up problems caused by capacitor values that are too high. For recommended input and output capacitor values refer to Table 1. Table 1: Recommended input and output capacitor values Table 2: EMC recommended circuit value table EMI C1 4.7µF/50V C2 4.7µF/50V CY 270pF/3000VDC C3/C4 Refer to the Cout in table 1 LDM 6.8μH Vin Cin Single output Cout Dual output Cout 12VDC 2.2µF/25V 3.3VDC 10µF/16V ±3.3VDC 4.7µF/16V 15VDC 2.2µF/25V 5VDC 10µF16V ±5VDC 4.7µF/16V 24VDC 1µF/50V 9VDC 2.2µF/16V ±12VDC 1µF/25V -- -- 12VDC 2.2µF/25V ±15VDC 0.47µF/25V -- -- 15VDC 1µF/25V ±24VDC 0.47µF/50V EMC (CLASS B) compliance circuit Dual Single

Page <6> V1.026/02/21 1W Isolated DC to DC Converters Single and Dual Output Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Notes: 1. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 2. The maximum capacitive load offered were tested at input voltage range and full load; 3. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25°C , humidity<75%RH with nominal input voltage and rated output load; 4. All index testing methods in this datasheet are based on our company corporate standards; 5. We can provide product customization service, please contact our technicians directly for specific information; 6. Products are related to laws and regulations: see "Features" and "EMC"; 7. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units. Dimensions and Recommended Layout