MPF102

MPF102 MOTOROLA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

1Motorola Small–Signal Transistors, FETs and Diodes Device Data /C0074/C0070/C0069/C0084 /C0086/C0072/C0070 /C0065/C0109/C0112/C0108/C0105/C0102/C0105/C0101/C0114 N–Channel — Depletion MAXIMUM RATINGS Rating Symbol Value Unit Drain–Source Voltage VDS 25 Vdc Drain–Gate Voltage VDG 25 Vdc Gate–Source Voltage VGS –25 Vdc Gate Current IG 10 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 350 2.8 mW mW/ °C Junction Temperature Range TJ 125 °C Storage Temperature Range Tstg –65 to +150 °C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Gate–Source Breakdown Voltage (IG = –10 µAdc, VDS = 0) V(BR)GSS –25 — Vdc Gate Reverse Current (VGS = –15 Vdc, VDS = 0) (VGS = –15 Vdc, VDS = 0, TA = 100°C) IGSS –2.0 –2.0 nAdc µAdc Gate–Source Cutoff Voltage (VDS = 15 Vdc, ID = 2.0 nAdc) VGS(off) — –8.0 Vdc Gate–Source Voltage (VDS = 15 Vdc, ID = 0.2 mAdc) VGS –0.5 –7.5 Vdc ON CHARACTERISTICS Zero–Gate–Voltage Drain Current(1) (VDS = 15 Vdc, VGS = 0 Vdc) IDSS 2.0 20 mAdc SMALL–SIGNAL CHARACTERISTICS Forward Transfer Admittance(1) (VDS = 15 Vdc, VGS = 0, f = 1.0 kHz) (VDS = 15 Vdc, VGS = 0, f = 100 MHz) yfs 2000 1600 7500 /C0109mhos Input Admittance (VDS = 15 Vdc, VGS = 0, f = 100 MHz) Re(yis) — 800 /C0109mhos Output Conductance (VDS = 15 Vdc, VGS = 0, f = 100 MHz) Re(yos) — 200 /C0109mhos Input Capacitance (VDS = 15 Vdc, VGS = 0, f = 1.0 MHz) C iss — 7.0 pF Reverse Transfer Capacitance (VDS = 15 Vdc, VGS = 0, f = 1.0 MHz) C rss — 3.0 pF 1. Pulse Test; Pulse Width /C0118 630 ms, Duty Cycle /C0118 10%. Order this document by MPF102/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0077/C0080/C0070/C0049/C0048/C0050 CASE 29–04, STYLE 5 TO–92 (TO–226AA) 2 3  Motorola, Inc. 1997

1 DRAIN

2 SOURCE

2 Motorola Small–Signal Transistors, FETs and Diodes Device Data

Figure 1. Effects of Drain Current

400 MHz

Figure 2. 100 MHz and 400 MHz Neutralized Test Circuit form. Tuning provided by a powdered iron slug. form. Tuning provided by an aluminum slug. **L2 1 turn, AWG #16 enameled copper wire, 3/8″ I.D. **L3 1/2 turn, AWG #16 enameled copper wire, 1/4″ I.D. test receiver (AIL type 136 or equivalent).

100 MHz 400 MHz

100 MHz

Figure 3. Effects of Drain–Source Voltage Figure 4. Effects of Drain Current Figure 5. Third Order Intermodulation Distortion

0.25 IDSS

4 Motorola Small–Signal Transistors, FETs and Diodes Device Data

Figure 6. Input Admittance (yis) Figure 7. Reverse Transfer Admittance (y rs) Figure 8. Forward Transadmittance (yfs) Figure 9. Output Admittance (y os)

6 Motorola Small–Signal Transistors, FETs and Diodes Device Data

Figure 14. Input Admittance (yig) Figure 15. Reverse Transfer Admittance (y rg) Figure 16. Forward Transfer Admittance (yfg) Figure 17. Output Admittance (y og)

/C0077/C0080/C0070/C0049/C0048/C0050

8 Motorola Small–Signal Transistors, FETs and Diodes Device Data

CASE 029–04 (TO–226AA) NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. R A P J L F B K G H SECTION X–X CV D N N XX SEATING PLANE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.175 0.205 4.45 5.20 B 0.170 0.210 4.32 5.33 C 0.125 0.165 3.18 4.19 D 0.016 0.022 0.41 0.55 F 0.016 0.019 0.41 0.48 G 0.045 0.055 1.15 1.39 H 0.095 0.105 2.42 2.66 J 0.015 0.020 0.39 0.50 N 0.080 0.105 2.04 2.66 STYLE 5: PIN 1. DRAIN 2. SOURCE 3. GATE ISSUE AD Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET : http://motorola.com/sps MPF102/D◊