MPA-12D03NP MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

  • 7PIN SIP package
  • No-load input current as low as 5mA
  • Continuous short-circuit protection
  • High efficiency up to 87%
  • Unregulated output types
  • 1.5KV DC to 3KV DC isolation
  • Operating temperature:-40°C to +105°C
  • Industry standard pinout
  • UL/cUL/IEC/EN 62368-1 approved, CB-Report Specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified Part Number Output Voltage Output Current Efficiency Capacitive Load(μF) V DC mA %TYP Max. MPA-05D03NP ±3.3 ±151 76 ±1200 MPA-05D05NP ±5 ±100 82 ±1200 MPA-05D12NP ±12 ±42 84 ±220 MPA-05D15NP ±15 ±34 84 ±220 MPA-05D24NP ±24 ±21 85 ±47 MPA-12D03NP ±3.3 ±151 78 ±1200 MPA-12D05NP ±5 ±100 82 ±1200 MPA-12D12NP ±12 ±42 85 ±220 MPA-12D15NP ±15 ±34 87 ±220 MPA-12D24NP ±24 ±21 85 ±47 MPA-15D05NP ±5 ±100 82 ±1200 MPA-15D12NP ±12 ±42 85 ±220 MPA-15D15NP ±15 ±34 87 ±220 MPA-24D05NP ±5 ±100 82 ±1200 MPA-24D12NP ±12 ±42 85 ±220 MPA-24D15NP ±15 ±34 87 ±220 MPA-24D24NP ±24 ±21 85 ±47

Page <2> V1.005/08/25 Isolated DC to DC Converters Dual Output Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Temperature Derating Graph Input Specifications Parameters Conditions Min Typ Max Units Voltage Range Vo,Io Nom @Vin:3.3V,5V,9V ±10 Vo,Io Nom@ Vin:12V,15V,24V ±20 Filter Capacitor Output Specifications Parameters Conditions Min Typ Max Units Voltage Range 100% full load ±5 % Short Circuit Protection Continuous Line Regulation For 1.0% OF Vin 1.2 Load Regulation 3.3V (10% To 100% F.L) 15 20 5V (10% To 100% F.L) 10 15 9V (10% To 100% F.L) 8 10 12V (10% To 100% F.L) 7 10 15V (10% To 100% F.L) 6 10 24V (10% To 100% F.L) 5 10 Ripple & Noise BW=DC To 20MHz @Vo:3.3V,5V,9V,12V,15V 30 75 mVp-p BW=DC To 20MHz @ Vo:24V 50 100 Tolerance Envelope Graph Electromagnetic Compatibility (EMC) EMI CE CISPR32/EN55032 CLASS B (see Fig. 1 for recommended circuit) RE CISPR32/EN55032 CLASS B (see Fig. 1 for recommended circuit) EMS ESD IEC/EN61000-4-2 Air ±8kV, Contact ±6kV perf. Criteria B

Page <3> V1.005/08/25 Isolated DC to DC Converters Dual Output Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro General Specifications Parameters Conditions Min Typ Max Units Isolation Resistance 500Vdc 1000 MΩ Isolation Capacitance Input-output,100KHz/0.1V 20 pF Switching Frequency Full load, nominal input @3.3V, 5V Vin 215/370 KHz Full load, nominal input @other Vin 250 Operation Temperature -40 +105 Storage Temperature -55 +125 Humidity Non Condensing 95 % Cooling Free air Convection Case material DAP MTBF MIL-HDBK-217F@25°C 3500000 Hours Weight 2.1 g Dimensions 19.5 × 6 × 10 mm Recommended Test Circuit Vin Cin Single Vout Cout Dual Vout Cout 5V DC 4.7μF/25V 5V DC 10μF/16V ±5V DC ±4.7μF/16V 9V DC 4.7μF/25V 9V DC 2.2μF/16V ±9V DC ±1μF/16V 12V DC 2.2μF/25V 12V DC 2.2μF/25V ±12V DC ±1μF/25V 15V DC 2.2μF/25V 15V DC 1μF/25V ±15V DC ±1μF/25V 24V DC 1μF/50V 24V DC 1μF/50V ±24V DC ±1μF/50V EMC (CLASS B) compliance circuit

Page <4> V1.005/08/25 Isolated DC to DC Converters Dual Output Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro EMC recommended circuit value table EMI C1 4.7μF /50V C2 4.7μF /50V CY 1nF/4kV C3, C4 Recommended Test Circuit L 6.8μH Markings and Dimensions Tolerances ±0.25 PIN 1 2 5 6 7 Single +Vin -Vin -Vout No Pin +Vout Dual +Vin -Vin -Vout Com +Vout PIN Connection Packaging Size (mm) A B C D 9.5 16.5 522 5

Page <5> V1.005/08/25 Isolated DC to DC Converters Dual Output Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Dimensions : Millimetres Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Part Number Table Description Part Number Isolated DC To DC Converter, 1W, V in 5 V DC, Vout ±3.3 V DC MPA-05D03NP Isolated DC To DC Converter, 1W, V in 5 V DC, Vout ±5 V DC MPA-05D05NP Isolated DC To DC Converter, 1W, V in 5 V DC, Vout ±12 V DC MPA-05D12NP Isolated DC To DC Converter, 1W, V in 5 V DC, Vout ±15 V DC MPA-05D15NP Isolated DC To DC Converter, 1W, V in 5 V DC, Vout ±24 V DC MPA-05D24NP Isolated DC To DC Converter, 1W, V in 12 V DC, Vout ±3.3 V DC MPA-12D03NP Isolated DC To DC Converter, 1W, V in 12 V DC, Vout ±5 V DC MPA-12D05NP Isolated DC To DC Converter, 1W, V in 12 V DC, Vout ±12 V DC MPA-12D12NP Isolated DC To DC Converter, 1W, V in 12 V DC, Vout ±15 V DC MPA-12D15NP Isolated DC To DC Converter, 1W, V in 12 V DC, Vout ±24 V DC MPA-12D24NP Isolated DC To DC Converter, 1W, V in 15 V DC, Vout ±5 V DC MPA-15D05NP Isolated DC To DC Converter, 1W, V in 15 V DC, Vout ±12 V DC MPA-15D12NP Isolated DC To DC Converter, 1W, V in 15 V DC, Vout ±15 V DC MPA-15D15NP Isolated DC To DC Converter, 1W, V in 24 V DC, Vout ±5 V DC MPA-24D05NP Isolated DC To DC Converter, 1W, V in 24 V DC, Vout ±12 V DC MPA-24D12NP Isolated DC To DC Converter, 1W, V in 24 V DC, Vout ±15V DC MPA-24D15NP Isolated DC To DC Converter, 1W, V in 24 V DC, Vout ±24 V DC MPA-24D24NP Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.