MP3M3

MP5M3 HELLERMANNTYTON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 3

Technical content

1.7 142 Further information at www.HellermannTyton.com/fixings Date of issue: October 2015 Cable Ties and Fixings Cable Tie Mounts Many applications require each cable run to be firmly held in place but separately from adjacent cable runs (example - control cabinets, machinery and military systems). The MP series of mounts helps to achieve this. Features and Benefits Allow multiple cables to be run in paral lel

• Simple to fix with two screws
• Cables are fixed by using a cable tie thr ough any combination of the available slots Mounting Plates for Screw Fixing MSMP mounting plates, screwable. MP-Series for parallel bundling Mounting plates in application Mounting plates MP and MSMP (plan and side view) FH H TYPE Width (W) Length (L) Height (H) Hole Ø (FH) Strap Width max. (G) No. of bundles Material Colour Pack Cont. Article-No. All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available. Material specification please see page 24. For product specific approvals and specifications please refer to the Appendix.

1.0 24 Further information at www.HellermannTyton.com/fixings Date of issue: October 2015 Material Specification Overview Cable Ties and Fixings Material Information MATERIAL Material Shortcut Operating Temperature Colour** Flammability Material Properties* Material Specifications Aluminium-alloy AL -40 °C to +180 °C Natural (NA)

• Corrosion resistant
• Antimagnetic Chloroprene CR -20 °C to +80 °C Black (BK) • Weather-resistant
• High yield strength Ethylene Tetrafluoroethylene E/TFE -80 °C to +170 °C Blue (BU) UL94 V0
• Resistance to radioactivity
• UV-resistant, not moisture sensitive
• Good chemical resistance to: acids, bases, oxidizing agents Polyacetal POM -40 °C to +90 °C, (+110 °C, 500 h) Natural (NA) UL94 HB
• Limited brittleness sensitivity
• Flexible at low temperature
• Not moisture sensitive
• Robust on impacts Polyamide 11 PA11 -40 °C to +85 °C, (+105 °C, 500 h) Black (BK) UL94 HB
• Bio-plastic, derived from vegetable oil
• Strong impact resistance at low temper ature
• Very low moisture absorption
• Weather-resistant
• Good chemical resistance Polyamide 12 PA12 -40 °C to +85 °C, (+105 °C, 500 h) Black (BK) UL94 HB
• Good chemical resistance to: acids, bases, oxidizing agents UV-resistant Polyamide 4.6 PA46 -40 °C to +150 °C (5000 h), +195 °C (500 h) Natural (NA), Grey (GY) UL94 V2
• Resistance to high temperatures
• Very moisture sensitive
• Low smoke sensitive Polyamide 6 PA6 -40 °C to +80 °C Black (BK) UL94 V2 • High yield strength Polyamide 6, high impact modified PA6HIR -40 °C to +80 °C Black (BK) UL94 HB • Limited brittleness sensitivity
• Higher flexibility at low temperature Polyamide 6.6 PA66 -40 °C to +85 °C, (+105 °C, 500 h) Black (BK), Natural (NA) UL94 V2 • High yield strength Polyamide 6.6, glass-fibre reinforced PA66GF13, PA66GF15 -40 °C to +105 °C Black (BK) UL94 HB • Good resistance to: lubricants, vehicle fuel, salt water and many solvents Polyamide 6.6, heat and UV stabilised PA66HSW -40 °C to +105 °C Black (BK) UL94 V2
• High yield strength
• Modified elevated max. temperature
• UV-resistant Polyamide 6.6, heat stabilised PA66HS -40 °C to +105 °C Black (BK), Natural (NA) UL94 V2 High yield strength
• Modified elevated max. temperature Polyamide 6.6, high impact modified PA66HIR -40 °C to +80 °C, (+105 °C, 500 h) Black (BK) UL94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature Polyamide 6.6, high impact modified, heat and UV stabilised PA66HIRHSW -40 °C to +110 °C Black (BK) UL94 HB Limited brittleness sensitivity
• Higher flexibility at low temperature
• Modified elevated max. temper ature
• High yield strength, UV-resistant Polyamide 6.6, high impact modified, heat stabilised PA66HIRHS -40 °C to +105 °C Black (BK) UL94 HB Limited brittleness sensitivity
• Higher flexibility at low temperature
• Modified elevated max. temperature Polyamide 6.6, high impact modified, scan black PA66HIR(S) -40 °C to +80 °C, (+105 °C, 500 h) Black (BK) UL94 HB • Limited brittleness sensitivity
• Higher flexibility at low temperature Polyamide 6.6, UV-resistant PA66W -40 °C to +85 °C, (+105 °C, 500 h) Black (BK) UL94 V2 • High yield strength
• UV-resistant Tefzel® is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel®- Tie. In additon to Tefzel® from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. **More colours on request. * These details are only rough guide values. They should be regar ded as a material specification and are no substitute for a suitability test. Please see our datasheets for further details. HF = Halogenfree LFH = Limited Fire Hazard RoHS = Restriction of Hazardous Substances

1.0 25Further information at www.HellermannTyton.com/fixings Date of issue: October 2015 Cable Ties and Fixings Material Information MATERIAL Material Shortcut Operating Temperature Colour** Flammability Material Properties* Material Specifications Polyamide 6.6, with metal particles PA66MP -40 °C to +85 °C, (+105 °C, 500 h) Blue (BU) UL94 HB • High yield strength

• Metal and X-Ray detectable Polyamide 6.6 V0 PA66V0 -40 °C to +85 °C White (WH) UL94 V0 • High yield strength
• Low smoke emission Polyamide 6.6 V0, High Oxygen Index PA66V0-HOI -40 °C to +85 °C, (+105 °C, 500 h) White (WH) UL94 V0 • High yield strength
• Low smoke emissions Polyester SP -50 °C to +150 °C Black (BK) Halogen free
• UV-resistant
• Good chemical resistance to: most acids, alkalis and oils Polyetheretherketone PEEK -55 °C to +240 °C Beige (BGE) UL94 V0
• Resistance to radioactivity
• Not moisture sensitive
• Good chemical resistance to: acids, bases, oxidizing agents Polyethylene PE -40 °C to +50 °C Black (BK), Grey (GY) UL94 HB
• Low moisture absorption
• Good chemical resistance to: most acids, alcohol and oils Polyolefin PO -40 °C to +90 °C Black (BK) UL94 V0 • Low smoke emissions Polypropylene PP -40 °C to +115 °C Black (BK), Natural (NA) UL94 HB
• Floats in water
• Moderate yield strength
• Good chemical resistance to: organic acids Polypropylene, Ethylene- Propylene-Dien- Terpolymere-rubber free of Nitrosamine PP , EPDM -20 °C to +95 °C Black (BK) UL94 HB Good resistance to high temperatures
• Good chemical and abrasion resistance Polypropylene with metal particles PPMP -40 °C to +115 °C Blue (BU) UL94 HB
• Floats in certain liquids
• Metal and X-Ray detectable
• Heat resistant
• Moderate yield strength
• Good chemical resistance Polyvinylchloride PVC -10 °C to +70 °C Black (BK), Natural (NA) UL94 V0
• Low moisture absorption
• Good chemical resistance to: acids, ethanol and oil Stainless Steel, Stainless Steel SS304, SS316 -80 °C to +538 °C Natural (NA) Non burning
• Corrosion resistant
• Antimagnetic
• Weather resistant
• Outstanding chemical resistance Thermoplastic Polyurethane TPU -40 °C to +85 °C Black (BK) UL94 HB High elasticity
• Good chemical resistance to: acids, bases and oxidizing agents Tefzel® is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel®- Tie. In additon to Tefzel® from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. **More colours on request. * These details are only rough guide values. They should be regar ded as a material specification and are no substitute for a suitability test. Please see our datasheets for further details. HF = Halogenfree LFH = Limited Fire Hazard RoHS = Restriction of Hazardous Substances