MP2013A MPS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 19
Technical content
40V, 150mA, Low-Quiescent Current Linear Regulator MP2013A Rev. 1.03 www.MonolithicPower.com 1 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved.
DESCRIPTION
The MP2013A is a low -power, linear regulator that supplies power to systems with high - voltage batteries. It includes a wide 2.5V to 40V input range, low -dropout voltage and low - quiescent-supply current. The low -quiescent current and low-dropout voltage allow operation at extremely low-power levels. The MP2013A is ideal fo r low-power microcontrollers and battery-powered equipment. The MP2013A provides a wide variety of fixed , output-voltage options: 1.8V, 1.9V, 2.3V, 2.5V, 3.0V, 3.3V, 3.45V, and 5.0V, and it provides an adjustable output option (from 1.215V to 15V). The regulator output current is internally limited; the device is protected against over-load and over-temperature conditions. The MP2013A includes thermal shutdown (TSD) and current -limiting fault protection . It is available in QFN6 (2 mmx2mm), and QFN8 (3mmx3mm) packages.
FEATURES
2.5V to 40V Input Range 3.3µ A Quiescent-Supply Current Stable with Low-Value Output Ceramic Capacitor (> 0.47 μF) 150mA Specified Current 620mV Dropout at 150mA Load Available in Fixed and Adjustable Output (1.215 V to 15 V) Versions ± 2% Output Accuracy Specified Current Limit Thermal Shutdown -40° C to +125° C Specified Junction- Temperature Range Available in QFN6 (2x2mm), and QFN8 (3x3mm) Packages
APPLICATIONS
Industrial/Automotive Applications Portable/Battery-Powered Equipment Ultra Low-Power Microcontrollers Cellular Handsets Medical Imaging All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION IN OUT EN FB GND Vout IN OUT EN GND FB VOUT Output Adjustable Version Output Fixed Version
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 2 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved.
ORDERING INFORMATION
Part Number* Package Top Marking MP2013AGQ QFN8(3mmx3mm) See Below MP2013AGQ-18 QFN8(3mmx3mm) MP2013AGQ-25 QFN8(3mmx3mm) MP2013AGQ-33 QFN8(3mmx3mm) MP2013AGQ-5 QFN8(3mmx3mm) * For Tape & Reel, add suffix –Z (e.g. MP2013AGQ-33–Z) PACKAGE REFERENCE QFN8(3mmx3mm) TOP MARKING AJD: part code of MP2013AGQ; Y: year code; LLL: lot number; AZB: part code of MP2013AGQ-18; Y: year code; LLL: lot number; AQN: part code of MP2013AGQ-25; Y: year code; LLL: lot number; AJZ: part code of MP2013AGQ-33; Y: year code; LLL: lot number; ALJ: part code of MP2013AGQ-5; Y: year code; LLL: lot number;
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 3 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. Part Number* Package Top Marking MP2013AGG QFN6(2mmx2mm) See Below MP2013AGG-33 QFN6(2mmx2mm) MP2013AGG-5 QFN6(2mmx2mm) * For Tape & Reel, add suffix –Z (e.g. MP2013AGG-33–Z) PACKAGE REFERENCE QFN6(2mmx2mm) TOP MARKING CD: part code of MP2013AGG; Y: year code; LLL: lot number; CP: part code of MP2013AGG-33; Y: year code; LLL: lot number; FR: part code of MP2013AGG-5; Y: year code; LLL: lot number;
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 4 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. ABSOLUTE MAXIMUM RATINGS (1) Continuous Power Dissipation (TA = +25° C) (2) ESD SUSCEPTIBILITY (3) Recommended Operating Conditions (4) Operating Junction Temp. (TJ). -40°C to +125°C Thermal Resistance (5) θJA θJC Notes: 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the maximum junction temperature T J (MAX), the junction -to- ambient thermal resistance θ JA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by P D (MAX) = (T J (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) Devices are ESD sensitive. Handling precaution recommended. 4) The device is not guaranteed to function outside of its operating conditions. 5) Measured on JESD51-7, 4-layer PCB.
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 5 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved.
ELECTRICAL CHARACTERISTICS
TJ = +25° C, VEN=VIN, IOUT = 1mA, COUT = 1μF, unless otherwise noted. Parameter Symbol Condition Min Typ Max Units Input Voltage VIN 2.5 40 V Output-Voltage Range VOUT 1.215 15 V GND Current IGND MP2013AGQ, 0<IOUT<1mA, VIN=2.5V to 40V, VOUT=5V(VIN6V) or FB(VIN<6V) 3.3 9 µA MP2013AGQ, 1mA<IOUT<30mA, VIN=2.5V to 15V, VOUT=5V (VIN6V) or FB (VIN<6V) 11 22 MP2013AGQ, 30mA<IOUT<150mA,VIN=6V,VOUT=5V 32 50 MP2013AGQ-18, 0mA<IOUT<1mA,VIN=3.5V to 40V 4.4 10 µA MP2013AGQ-18, 1mA<IOUT<30mA,VIN=3.5V to 15V 15 25 MP2013AGQ-18, 30mA<IOUT<150mA, VIN=3.5V 35 50 MP2013AGQ-25 0mA<IOUT<1mA,VIN=3.5V to 40V 4.4 10 µA MP2013AGQ-25, 1mA<IOUT<30mA,VIN=3.5V to 15V 15 25 MP2013AGQ-25, 30mA<IOUT<150mA, VIN=3.5V 35 50 MP2013AGQ-33, 0<IOUT<1mA, VIN=4.3V to 40V 4.4 10 µA MP2013AGQ-33, 1mA<IOUT<30mA, VIN=4.3V to 15V 15 25 MP2013AGQ-33, 30mA<IOUT<150mA, VIN=4.3V 35 50 MP2013AGQ-5, 0<IOUT<1mA, VIN=6V to 40V 4.4 8 µA MP2013AGQ-5, 1mA<IOUT<30mA, VIN=6V to 15V 15 20 MP2013AGQ-5, 30mA<IOUT<150mA, VIN=6V 35 48 MP2013AGG, 0<IOUT<1mA, VIN=2.5V to 40V, VOUT=5V(VIN6V) or FB(VIN<6V) 3.3 9 µA MP2013AGG, 1mA<IOUT<30mA, VIN=2.5V to 15V, VOUT=5V (VIN6V) or FB (VIN<6V) 11 22 MP2013AGG, 30mA<IOUT<150mA,VIN=6V,VOUT=5V 32 50
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 6 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. ELECTRICAL CHARACTERISTICS (continued) TJ = +25° C, VEN=VIN, IOUT = 1mA, COUT = 1μF, unless otherwise noted. Parameter Symbol Condition Min Typ Max Units GND Current IGND MP2013AGG-33, 0<IOUT<1mA, VIN=4.3V to 40V 4.4 10 µA MP2013AGG-33, 1mA<IOUT<30mA, VIN=4.3V to 15V 15 25 MP2013AGG-33, 30mA<IOUT<150mA, VIN=4.3V 35 50 MP2013AGG-5, 0<IOUT<1mA, VIN=6V to 40V 4.4 10 µA MP2013AGG-5, 1mA<IOUT<30mA, VIN=6V to 15V 15 25 MP2013AGG-5, 30mA<IOUT<150mA, VIN=6V 35 50 Shutdown Supply Current ISHDN VEN=0, VIN=2.5 to 40V 3 9 µA Load Current Limit ILIMIT MP2013AGQ, MP2013AGQ-5, MP2013AGG, MP2013AGG-5, VOUT = 0V, VIN=6V to 15V 180 270 400 mA MP2013AGQ-33, MP2013AGG-33, VOUT = 0V, VIN=4.3V to 15V MP2013AGQ-18, MP2013AGQ-25, VOUT=0V,VIN=3.5V to 15V Output-Voltage Accuracy MP2013AGQ-18, VIN=2.8V,IOUT=0 1.773 1.8 1.827 V MP2013AGQ-25, VIN=3.5V,IOUT=0 2.45 2.5 2.55 MP2013AGQ-33, MP2013AGG-33, VIN=4.3V,IOUT=0 3.234 3.3 3.366 MP2013AGQ-5, MP2013AGG-5, VIN=6V, IOUT=0 4.9 5 5.1 FB Voltage VFB VOUT=FB, VIN=5V, IOUT=0 1.191 1.215 1.239 V Dropout Voltage VIN=VOUT(NOM)-0.1V VDROPOUT MP2013AGQ-18, IOUT=100mA, VOUT(NOM)=1.8V 700 950 mV MP2013AGQ-25, IOUT=150mA, VOUT(NOM)=2.5V 700 900 MP2013AGQ-33, IOUT = 150mA, VOUT(NOM) =3.3V 700 850 MP2013AGQ-5, MP2013AGQ, MP2013AGG-5, MP2013AGG, IOUT = 150mA, VOUT(NOM) =5V 600 850 MP2013AGG-33, IOUT = 150mA, VOUT(NOM) =3.3V 700 1000
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 7 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. ELECTRICAL CHARACTERISTICS (continued) TJ = +25° C, VEN=VIN, IOUT = 1mA, COUT = 1μF, unless otherwise noted. Parameter Symbol Condition Min Typ Max Units FB Input Current IFB MP2013A-18, MP2013A-25, MP2013A-33 and MP2013A-5, VFB = 1.3V, VIN=6V, OUT Floating 0.9 1.3 1.6 μA MP2013A, VFB = 1.3V, VIN=6V, OUT Floating -50 0 50 nA Line Regulation(6) VIN = 2.5 to 40V, IOUT = 1mA, OUT = FB 0.01 0.05 %/V Load Regulation(7) MP2013AGQ-18, IOUT=100μA to 150mA, VIN= 2.8V to 6V 0.005 0.01 %/mA MP2013AGQ-25, IOUT=100uA to 150mA , VIN=3.5V to 6V MP2013AGQ-33, MP2013AGG-33, IOUT = 100μA to 150mA, VIN=4.3V to 6V MP2013AGQ, MP2013AGQ-5, MP2013AGG, MP2013AGG-5, IOUT = 100μA to 150mA, VIN= 6V Output Voltage PSRR(8) 100Hz, CIN = 100pF, COUT = 4.7μF IOUT=10mA, VIN=6V 58 dB 1kHz, CIN = 100pF, COUT = 4.7μF IOUT=10mA, VIN=6V 41 dB 100kHz, CIN = 100pF, COUT = 4.7μF IOUT=10mA, VIN=6V 55 dB Startup Response Time MP2013AGQ, MP2013AGG, IOUT= 100mA, COUT=6.8µ F, VOUT= 5V ms MP2013AGQ-18, IOUT=10mA, COUT=6.8µ F, VOUT=1.8V 1.1 MP2013AGQ-25, IOUT=10mA, COUT=6.8µF, VOUT=2.5V 1.5 MP2013AGQ-33, MP2013AGG-33, IOUT= 10mA, COUT=6.8µ F, VOUT= 3.3V 1.8 MP2013AGQ-5, MP2013AGG-5, IOUT= 10mA, COUT=6.8µF, VOUT= 5V
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 8 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. ELECTRICAL CHARACTERISTICS (continued) TJ = +25° C, VEN=VIN, IOUT = 1mA, COUT = 1μF, unless otherwise noted. Parameter Symbol Condition Min Typ Max Units EN Rising Threshold ENTH_R VIN=2.5V to 40V 1.38 1.48 1.58 V EN Falling Threshold ENTH_F VIN=2.5V to 40V 1.18 1.26 1.38 V EN Input Current IEN VEN = 0V or 15V, VIN=2.5V to 40V 0.1 μA Thermal Shutdown(8) TSD 150 165 C Thermal Shutdown Hysteresis(8) ΔTSD 20 C Notes: 6) Line Regulation= IN(MAX) IN(MIN)OUT[V ] OUT[V ] IN(MAX) IN(MIN) OUT(NOM) | V V | (%/ V)(V V ) V 7) Load Regulation= OUT(MAX) OUT(MIN)OUT[I ] OUT[I ] OUT(MAX) OUT(MIN) OUT(NOM) | V V | (%/mA)(I I ) V 8) Derived from bench characterization. Not tested in production.
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 9 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. TYPICAL CHARACTERISTICS
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 10 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. TYPICAL PERFORMANCE CHARACTERISTICS CIN = 1μF, COUT = 4.7μF, VOUT=5V, TA = +25º C, unless otherwise noted
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 11 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. TYPICAL PERFORMANCE CHARACTERISTICS (continued) CIN = 1μF, COUT = 4.7μF, VOUT=5V, TA = +25º C, unless otherwise noted
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 12 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. PIN FUNCTIONS Pin # QFN6 (2mmx2mm) Pin # QFN8 (3mmx3mm) Name Description 1 1 IN Input Voltage. Connect IN to a 2.5V to 40V supply. 2 2 EN Enable. A logic low on EN shuts down the IC; logic high starts it up. Connect EN to IN for automatic startup. 3, exposed pad 4, exposed pad GND Ground. The exposed pad and GND must be connected to the same ground plane. 4 5 FB Feedback Input. FB is regulated to 1.215V nominally. Connect to an external resistive divider between OUT and GND to set output voltage. For a fixed-output version, FB can float. 6 8 OUT Regulated Output Voltage. Only a low-value ceramic capacitor (≥ 0.47μF) on output is required for stability. 5 3, 6, 7 NC No Connection. May be left open or tied to ground for improved thermal performance.
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 13 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. OPERATION The MP2013A is a linear regulator that supplies power to systems with high -voltage batteries. It includes a wide 2.5V to 40V input range, low - dropout voltage and low -quiescent-supply current. The MP2013A provides a wide variety of fixed , output-voltage options: 1.8V, 1.9V, 2.3V, 2.5V, 3.0V, 3.3V, 3.45V, and 5.0V; and it provides an adjustable output option (from 1.215V to 15V). The adjustable output option delivers an output that is adjustable from 1.2 15V to 15V with a simple resistor divider. It uses ext ernal feedback, allowing the user to set the output voltage with an external resistor divider. The typical FB voltage is 1.215V. The IC enters shutdown mode when EN is low. In shutdown mode, the pass transistor, control circuitry, reference , and all biases turn off, reducing the supply current to < 3µ A. Connect EN to IN for automatic startup. The regulator output current is internally limited. The device is protected against over-load and over-temperature conditions. The peak -output current is limited to around 270mA, which exceed s the 150mA recommended continuous-output current. When the junction temperature is too high, the thermal sensor sends a signal to the control logic that shut s down the IC. The IC restarts when the temperature has cooled sufficiently. The maximum power -output current is a function of the package’s maximum power dissipation for a given temperature. The maximum power dissipation is dependent on the thermal resistance of the case and the circuit board, the temperature difference between the die junction and the ambient air, and the rate of air flow. The GND and exposed pad must be connected to the ground plane for proper dissipation. UVLO Vreference EA VIN EN VOUT FBGND For fixed output version only Figure 1: Functional Block Diagram
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 15 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. Input Capacitor For proper operation, place a ceramic capacitor (C1) between 1µ F and 10µ F of dielectric type X5R or X7R between the input pin and ground. Larger values in this range will help improve line transient response. Output Capacitor For stable operation, use a ceramic capacitor (C3) of type X5R or X7R between 1µ F and 10µ F. Larger values in this range will help improve load transient response and reduce noise . Output capacitors of other dielectric types may be used, but are not recommended as their capacitance can deviate greatly from their rated value over temperature. To improve load transient response, add a small ceramic (X5R, X7R or Y5V dielectric) 22nF feed forward capacitor in parallel with R 1. The feed forward capacitor is not required for stable operation. Output Noise The MP2013A will exhibit noise on the output during normal operation. This noise is negligible for most applications. However, in applications that include analog -to-digital converters (ADCs) of more than 12 bits, one needs to consider the ADC’s power supply rejection specifications. The feed forward capacitor C2 across R1 will significantly reduce the output noise. External Reverse Voltage Protection In some situations, e.g . a backup battery is connected as MP2013A load, the output voltage may be held up while the input is either pulled to ground, pulled to some intermediate voltage or is floating. Thus, the output voltage is higher than input voltage. Since the MP2013A PMOS pass element has a body diode, a current will conduct from the output to input and is not internally limited. It’s possible that the IC will be damaged by this unlimited reverse current. To avoid this, it’s recommended to place an external diode at input like below. MP2013A IN GND VIN OUT VOUT PCB Layout Guide PCB layout is very important to achieve good regulation, ripple rejection, transient response and thermal performance. It is highly recommended to duplicate EVB layout for optimum performance. If change is necessary, please follow these guidelines and take figure 5 for reference. 1) Input and output bypass ceramic capacitors are suggested to be put close to the IN Pin and OUT Pin respectively. 2) Ensure all feedback connections are short and direct. Place the feedback resistors and compensation components as close to the chip as possible. 3) Connect IN, OUT and especially GND respectively to a large copper area to cool the chip to improve thermal performance and long-term reliability. R2 C3C1 IN EN GND FB OUT VIN VOUT C2MP2013A
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR MP2013A Rev. 1.03 www.MonolithicPower.com 18 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved.
PACKAGE INFORMATION
QFN8 (3mmx3mm) SIDE VIEW TOP VIEW 5 4 BOTTOM VIEW 2.90 3.10 1.45 1.75 2.90 3.10 2.25 2.55 0.65 BSC 0.20 0.30 0.80 1.00 0.00 0.05
0.20 REF
1.70 0.65 0.25 RECOMMENDED LAND PATTERN
2.90 NOTE:
1) ALL DIMENSIONS ARE IN MILLIMETERS. 2) EXPOSED PADDLE SIZE DOES NOT INCLUDE MOLD FLASH. 3) LEAD COPLANARITY SHALL BE 0.10 MILLIMETER MAX. 4) JEDEC REFERENCE IS MO-229, VARIATION VEEC-2. 5) DRAWING IS NOT TO SCALE. PIN 1 ID SEE DETAIL A 2.50 0.70 PIN 1 ID OPTION B R0.20 TYP. PIN 1 ID OPTION A 0.30x45º TYP. DETAIL A 0.30 0.50 PIN 1 ID INDEX AREA
MP2013A - 40V, 150mA, LOW-QUIESCENT CURRENT LINEAR REGULATOR NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications. Users should warrant and guarantee that third party I ntellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. MP2013A Rev. 1.03 www.MonolithicPower.com 19 10/16/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. QFN6 (2mmx2mm) SIDE VIEW TOP VIEW 4 3 BOTTOM VIEW 1.90 2.10 0.65 0.85 1.90 2.10 1.25 1.45 0.65 BSC 0.20 0.30 0.80 1.00 0.00 0.05 0.70 0.65 0.25 RECOMMENDED LAND PATTERN
1.90 NOTE:
1) ALL DIMENSIONS ARE IN MILLIMETERS. 2) EXPOSED PADDLE SIZE DOES NOT INCLUDE MOLD FLASH. 3) LEAD COPLANARITY SHALL BE 0.10 MILLIMETER MAX. 4) JEDEC REFERENCE IS MO-229, VARIATION VCCC. 5) DRAWING IS NOT TO SCALE. PIN 1 ID SEE DETAIL A 1.40 0.70 PIN 1 ID OPTION A 0.30x45º TYP. PIN 1 ID OPTION B R0.20 TYP. DETAIL A 0.30 0.40 PIN 1 ID INDEX AREA