MP1C CYNERGY3 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
- Installation through G1”or G1”1/4
- Supplied with gland & counterweight
- Mount through side or top of tank For compressor receivers or pressurised tanks This float switch is designed specially to maintain the air cushion in autoclaves and is available in two different versions 1” or 1”1/4.diameter. Thanks to its small diameter it can be introduced into the tank through a coupling and mounted either horizontally or vertically (with counterweight).The level switch action point is determined by the cable length with the entry point (if horizontal) or to the application point (if vertical).When the tank water level rises , the switch gives the starting up command to the compressor contactor or to the compressed air valve, which then stops the pump with an auxiliary contact. When the water / air level stabilises at the desired position, the switch stops the compressor and starts the pump. Cynergy3 Components Ltd
7 Cobham Road
Ferndown Industrial Estate Wimborne Dorset BH21 7PE Tel: +44 (0) 1202 897969 sales@cynergy3.com MECHANICAL On - Off Differential 5% Off - On Minimum Cable Pivot length 120mm Technical Specifications MP1C-3 MP1C-5 Contact Form C/O Material High Density Polyethylene Temp Range °C 0 / +55 °F + 32 / +131 Cable 3 metre 5 metre Standard cable covering PVC 3x1 A05 VVF Rf60 Max. working pressure 10 bar Electrical Specifications Power Rating Max 3VA Switching Voltage Max 60Vac Switching Current Max. Resistive 0.25 A It is necessary to use an auxiliary relay, when switching any significant load. MP1C Series www.cynergy3.com www.cynergy3.comISO 9001 ISO 9001CERTIFIED CERTIFIED
- Installation through G1”or G1”1/4
- Supplied with gland & counterweight
- Mount through side or top of tank For compressor receivers or pressurised tanks This float switch is designed specially to maintain the air cushion in autoclaves and is available in two different versions 1” or 1”1/4.diameter. Thanks to its small diameter it can be introduced into the tank through a coupling and mounted either horizontally or vertically (with counterweight).The level switch action point is determined by the cable length with the entry point (if horizontal) or to the application point (if vertical).When the tank water level rises , the switch gives the starting up command to the compressor contactor or to the compressed air valve, which then stops the pump with an auxiliary contact. When the water / air level stabilises at the desired position, the switch stops the compressor and starts the pump. Cynergy3 Components Ltd
Ferndown Industrial Estate Wimborne Dorset BH21 7PE Tel: +44 (0) 1202 897969 sales@cynergy3.com MECHANICAL On - Off Differential 5% Off - On Minimum Cable Pivot length 120mm Technical Specifications MP1C-3 MP1C-5 Contact Form C/O Material High Density Polyethylene Temp Range °C 0 / +55 °F + 32 / +131 Cable 3 metre 5 metre Standard cable covering PVC 3x1 A05 VVF Rf60 Max. working pressure 10 bar Electrical Specifications Power Rating Max 3VA Switching Voltage Max 60Vac Switching Current Max. Resistive 0.25 A It is necessary to use an auxiliary relay, when switching any significant load. MP1C Series www.cynergy3.com www.cynergy3.comISO 9001 ISO 9001CERTIFIED CERTIFIED