MP15005 HY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Low forward voltage drop RoHS
  • Small size, simple installation COMPLIANT
  • Meet UL flammability classification 94V-0 Mechanical Data
  • Polarity: Symbol marked on body
  • Mounting position: Any Note: Products with logo or are made by HY Electronic (Cayman) Limited.

Applications

  • General purpose use in AC/DC bridge full wave rectification, for power supply, industrial automation applications, etc. Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol MP15005 MP1501 MP1502 MP1504 MP1506 MP1508 MP1510 Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum Average Forward Rectified Output Current at TA=50℃ Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load I2t Rating for Fusing (t<8.3mS) I2t A2s Maximum Forward Voltage Drop Per Bridge Element at 7.5A Peak Maximum Reverse Current at Rated TJ=25℃ μA DC Blocking Voltage Per Element TJ=100℃ mA Operating Temperature Range TJ ℃ Storage Temperature Range TSTG ℃ MP15*-B-00-00 Rev. 11, 18-May-2020 I(AV) IFSM VF IR A A V 300 1.1 15.0 MP15005 thru MP1510 10.0 1.0 -55 to +125 -55 to +150 Dimensions in inches and (milimeters) 373.5 Silicon Bridge Rectifiers
  • High surge forward current capability Reverse Voltage - 50 to 1000 Volts Forward Current - 15 Amperes MP8 Pb All d ata sheet.com

Rating and Characteristic Curves MP15005 thru MP1510 The curve above is for reference only. MP15*-B-00-00 Rev. 11, 18-May-2020 TJ=25°C TJ=75°C TJ=100°C TJ=125°C Fig. 4 - Typical Forward Characteristics Instantaneous Forward Current (A) Instantaneous Forward Voltage (V) Fig. 2 - Maximum Non-Repetitive Surge Current Number of Cycles at 60Hz Peak Forward Surge Current (A) 100 150 200 250 300 350 1 10 100 8.3mS Single Half-Sine-Wave (JEDEC METOD) Instantaneous Reverse Current (uA) Fig. 3 - Typical Reverse Characteristics 0.1 100 1000 20 40 60 80 100 TJ=25°C Percent of Rated Peak Reverse Voltage (%) 0 50 100 150 Fig. 1 - Forward Current Derating Curve Average Forward Current (A) Ambient Temperature (℃) 0.01 0.1 17.5 TJ=25°C TJ=75°C TJ=100°C TJ=125°C TJ=150°C TJ=25°C TJ=25°C TJ=25°C Pulse Width 300uS 2%Duty Cycle All d ata sheet.com

ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require- ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi- lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet- ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers- onnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of HY. Product names and markings noted herein may be trademarks of their respective owners. Rev. 11, 18-May-2020 Disclaimer All d ata sheet.com