MP15005W CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Reverse Voltage - 50 to 1000 Volts Forward Current - 15.0 Amperes Case: Metal case Terminals: Lead 0.040” (1.02mm) diameter. Polarity: Polarity symbols marked on case Mounting:Thru hole for #8 screw,20in.-lbs. torque max. Weight:0.93 ounce, 26.4 grams
FEATURES
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase,half wave 60Hz,resistive or inductive load,for current capacitive load, derate by 20%. NOTES: 2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #8 screw. The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260 C/10 seconds,at 5 lbs. (2.3kg) tension 300.0 373 1.0 2500 2.0 -65 to +150 -65 to +150 100 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 15005W 1501W 1502W 1506W 1508W 1510W1504W VOLTS VOLTS VOLTS SYMBOLS UNITS Amps Amps Volts VRRM VRMS VDC I(AV) IFSM Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current at TC=55 C (Note 1,2) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for Fusing(t<8.3ms) Maximum instantaneous forward voltage dorp per bridge element at 7.5A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Isolation voltage from case to leads Typical Thermal Resistance (Note 2) Operating junction temperature range storage temperature range Aµ C I t VISO RθJA TJ TSTG C/W mAIR C VAC A s 2 2 VF 1.1 KBPC-25W Dimensions in inches and (millimeters) 0.452 (11.5) 0.042(1.10) DIA. 0.038(0.97) 1.181(30.0) 1.102(28.0) 0.673(17.1) 0.633(16.1) HOLE FOR NO.8 SCREW 0.033x.250 (0.8x6.4) 1.181(30.0) 1.102(28.0) 0.468(11.9) 0.429(10.9) 0.732(18.6) 0.692(17.6) AC AC MAX. 0.591 (15.0) MAX. 0.732(18.6) 0.692(17.6) 2014-03 01版 MDD Catalog Number http://www.microdiode.com MPMPMPMPMPMPMP
RATINGS AND CHARACTERISTIC CURVES MP15005W THRU MP1510W 0 25 50 75 100 125 150 175 300 250 200 150 100 0.1 1.0 10 100 0.01 0.1 1 10 100 0.1 0.01 REVERSE VOLTAGE,VOLTS t,PULSE DURATION,sec. FIG. 5-TYPICAL JUNCTION CAPACITANCE FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS NUMBER OF CYCLES AT 60 Hz FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1- FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES JUNCTION CAPACITANCE, pF PEAK FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS Single Phase Half Wave 60Hz Resistive or inductive Load 1 10 100 0.1 200 100 TJ=25 C PULSE WIDTH=300 µs 1%DUTY CYCLE TJ=25 C 100 1000 2000 0 20 40 60 80 100 1,000 100 0.1 0.01 TJ=100 C TJ=25 C PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TRANSIENT THERMAL IMPEDANCE, C/W AMBIENT TEMPERATURE, C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 2014-03 01版 http://www.microdiode.com