MP10005G MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- Surge overload rating -175 amperes peak
- Low forward voltage drop
- Small size; simple installation
- Sliver plated copper leads Mechanical Data Mounting Position : Any Reverse Voltage : 50 to 800 Volts Forward Current : 10 Ampere Maximum Ratings and Electrical Characteristics: Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol MP10005G MP1004G MP1006G MP1008G Unit Max. Recurrent Peak Reverse Voltage Vrrm 50 400 600 800 V Max. RMS Bridge Input Voltage Vrms 35 280 420 560 V Max. Average Forward Rectified Output Current at @Ta = 75°C I(AV) 10 A Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load Ifsm 175 A Max. Forward Voltage Drop Per Bridge Element at 5.0A Peak Vf 1.1 V Max. Reverse Current at Rated @Tj = 25°C DC Blocking Voltage Per Element @Tj = 100°C Ir μA mA Operating Temperature Range Tj -55 to +150 Storage Temperature Range TsTg °C Ratings and Characteristic Curves
Page <2> V1.012/09/19 Glass Passivated Bridge Rectifier Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Part Number Glass Passivated Bridge Rectifiers, 10A 400V MP1004G Glass Passivated Bridge Rectifiers, 10A 50V MP10005G Glass Passivated Bridge Rectifiers, 10A 600V MP1006G Glass Passivated Bridge Rectifiers, 10A 800V MP1008G Dimensions : Inches (Millimetres) Dimensions: Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.