MP004401 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Page <1> V1.023/10/20 LCD Water Washable Resins Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Feature
- Strength and property of standard resin, various colour
- Low order and low irritation,
- The printed model can be washed and cleaned by water directly
- Satefty and Eco-friendly, High surface precision Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Part Number Table Description Part Number LCD Water Washable Resin, Grey, 500g MP004399 LCD Water Washable Resin, Clear, 500g MP004400 LCD Water Washable Resin, White, 500g MP004401 LCD Water Washable Resin, Black, 500g MP004402 LCD Water Washable Resin, Red, 500g MP004403
Description
Compared with other resins, water Washable resin has lower viscosity and excellent liquidity, the printed can remove from release firm much easier. It can great increase the success rate of printing and increase the service list of release firm. Specification The printed model cleaned by water instead alcohol. There is no pungent smell of alcohol during cleaning and lower irration to skin, greatly decrease the post processing time and increase the printing efficiency. High precision and smooth surface of model, clear details and highly appear printing size. Better nature , better life. For enviromental protection, the used water should pour into a plastic/glass bottle and put it under sunlight for 2-3 hours, then the remained resin in the water can be fully cured and no harm to enviroment. Printing Data Viscosity : 100-120MPs (NDJ-85 Rotating cylinder viscometer (25°C)) Wave length : 395nm - 410nm Density : 1.05 - 1.25g/cm3 (Density meter (25°C))