MMZ09312B_12 FREESCALE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 20

Technical content

Features

  • Frequency: 400- -1000 MHz
  • P1dB: 29.6 dBm @ 900 MHz
  • Power Gain: 31.7 dB @ 900 MHz
  • OIP3: 42 dBm @ 900 MHz
  • Active Bias Control (adjustable externally)
  • Single 3 to 5 Volt Supply
  • Performs Well with Digital Predistortion Systems
  • Single- -ended Power Detector
  • Cost- -effective QFN Surface Mount Package
  • In Tape and Reel. T1 Suffix = 1,000 Units, 12 mm Tape Width, 7 inch Reel.

Table 1. Typical Performance(1)

  1. VCC1 =V CC2 =V BIAS =5V d c ,TA =2 5°C, 50 ohm system, CW

Table 2. Maximum Ratings

  1. For reliable operation, the junction temperature should not

Table 3. Thermal Characteristics Select Documentation/Application Notes - - AN1955. © Freescale Semiconductor, Inc., 2011- -2012.All rights reserved.

Freescale Semiconductor, Inc. Table 4. Electrical Characteristics(VCC1 =V CC2 =V BIAS = 5 Vdc, 900 MHz, TA =2 5°C, 50 ohm system, in Freescale CW Table 5. ESD Protection Characteristics Table 6. Moisture Sensitivity Level

  1. For reliable operation, the junction temperature should not exceed 150°C.

Figure 1. Functional Block Diagram Figure 2. Pin Connections

Freescale Semiconductor, Inc. Figure 3. MMZ09312B Test Circuit Schematic — 900 MHz, 5 Volt Operation Table 7. MMZ09312B Test Circuit Component Designations and Values — 900 MHz, 5 Volt Operation Note: Component numbers C6, C7, C8, C9 and R3 are labeled on board but not placed.

Freescale Semiconductor, Inc. Figure 4. MMZ09312B Test Circuit ComponentLayout — 900 MHz, 5 Volt Operation (1) VBIAS [Board] supplies VBA1,V BA2 and VBIAS [Device]. Note: Component numbers C6*, C7*, C8*, C9* and R3* are labeled on board but not placed.

Freescale Semiconductor, Inc. Figure 12. MMZ09312B Test Circuit Schematic — 900 MHz, 3.3 Volt Operation Table 8. MMZ09312B Test Circuit Component Designations and Values — 900 MHz, 3.3 Volt Operation Note: Component numbers C6, C7, C8, C9 and R3 are labeled on board but not placed.

Freescale Semiconductor, Inc. Figure 13. MMZ09312B Test Circuit ComponentLayout — 900 MHz, 3.3 Volt Operation (1) VBIAS [Board] supplies VBA1,V BA2 and VBIAS [Device]. Note: Component numbers C6*, C7*, C8*, C9* and R3* are labeled on board but not placed.

Freescale Semiconductor, Inc. Figure 21. MMZ09312B Test Circuit Schematic — 450 MHz, 5 Volt Operation Table 9. MMZ09312B Test Circuit Component Designations and Values — 450 MHz, 5 Volt Operation Note: Component numbers C6, C7, C8, C9 and R3 are labeled on board but not placed.

Freescale Semiconductor, Inc. Figure 22. MMZ09312B Test Circuit ComponentLayout — 450 MHz, 5 Volt Operation (1) VBIAS [Board] supplies VBA1,V BA2 and VBIAS [Device]. Note: Component numbers C6*, C7*, C8*, C9* and R3* are labeled on board but not placed.

Freescale Semiconductor, Inc. MMZ09312BT1 PACKAGE DIMENSIONS

Freescale Semiconductor, Inc.

Freescale Semiconductor, Inc. MMZ09312BT1

Freescale Semiconductor, Inc. PRODUCT DOCUMENTATION, SOFTWARE AND TOOLS Refer to the following documents, software and tools to aid your design process. Application Notes

  • AN1955: Thermal Measurement Methodology of RF Power Amplifiers Software
  • .s2p File Development Tools
  • Printed Circuit Boards For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the Software & Tools tab on the part’s Product Summary page to download the respective tool.

REVISION HISTORY

The following table summarizes revisions to this document. Revision Date Description 0 Nov. 2011 • Initial Release of Data Sheet 1 Feb. 2012 • Typical Performance table: changed Pout at 750 MHz from 19.5 to 17.5 dBm to reflect recent performance measurements, p. 1

  • Figs. 3, 12 and 21, MMZ09312B Test Circuit Schematic: corrected L1 inductor label in test circuit schematics, p. 3, 7 and 11

Freescale Semiconductor, Inc. MMZ09312BT1 Information in this document is provided solely to enablesystem and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its productsfor any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and allliability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components insystems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributorsharmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2011- -2012. All rights reserved. How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516

2100 East Elliot Road

Tempe, Arizona 85284 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) + 3 316 93 54 84 8( F r e n c h ) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1- -8- -1, Shimo- -Meguro, Meguro- -ku, Tokyo 153- -0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MMZ09312B Rev. 1, 2/2012