MMT10V275 MOTOROLA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
1Motorola Thyristor Device Data /C0065/C0100/C0118/C0097/C0110/C0099/C0101 /C0073/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0084/C0104/C0121/C0114/C0105/C0115/C0116/C0111/C0114 /C0083/C0117/C0114/C0103/C0101 /C0083/C0117/C0112/C0112/C0114/C0101/C0115/C0115/C0111/C0114/C0115 High Voltage Bidirectional TVS Devices These transient voltage suppression (TVS ) devices prevent overvoltage damage to sensitive circuits by lightning, induction and power line crossings. They are breakover–triggered crowbar protectors. Turn–off occurs when the surge current falls below the holding current value. Applications include current loop lines in telephony and control systems, central office stations, repeaters, building and residence entrance terminals and electronic telecom equipment.
- High Surge Current Capability
- Bidirectional Protection in a Single Device
- Little Change of Voltage Limit with Transient Amplitude or Rate
- Freedom from Wearout Mechanisms Present in Non–Semiconductor De- vices
- Fail–Safe. Shorts When Overstressed, Preventing Continued Unprotected Operation. DEVICE RATINGS: –40°C to 50°C for MMT10V275 –40°C to 65°C for MMT10V400 (except surge) Parameter Symbol Value Unit Peak Repetitive Off–State Voltage — Maximum MMT10V275 MMT10V400 VDM ± 200 ± 265 Volts On–State Surge Current — Maximum Nonrepetitive (MMT10V400–20°C to 65°C) 10 x 1000 µs exponential wave, Notes 1, 2, 3 60 Hz ac, 1000 V(rms), RS = 1.0 kΩ , 1 second
60 Hz ac, 480 V(rms), RS = 48 Ω , 2 seconds
± 100 ± 10 ± 1.0 A(pk) A(rms) A(rms) Rate of Change of On–State Current — Maximum Nonrepetitive Critical Damped Wave, C = 1.2 µF, L = 16 µH, R = 7.4, VCI = 1000 V, I(pk) = 100 A (short circuit), 0 to 50% I (pk) di/dt 50 A/µs DEVICE THERMAL RATINGS Operating Temperature Range Blocking or Conducting State TJ1 –40 to +125 °C Overload Junction T emperature — Maximum Conducting State Only TJ2 +175 °C Thermal Resistance, Junction to Case — Maximum R θJC 1.5 °C/W Thermal Resistance, Case to Ambient, Without Heatsink — +200 °C/W This document contains information on a new product. Specifications and information herein are subject to change without notice. Preferred devices are Motorola recommended choices for future use and best overall value. Order this document by MMT10V275/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0077/C0077/C0084/C0049/C0048/C0086/C0050/C0055/C0053 /C0077/C0077/C0084/C0049/C0048/C0086/C0052/C0048/C0048 BIDIRECTIONAL THYRISTOR SURGE SUPPRESSORS
25 WATTS STEADY STATE
CASE 416A–01 *Motorola preferred devices /C0042 /C0042 Motorola, Inc. 1995
2 Motorola Thyristor Device Data
- Allow cooling before testing second polarity.
- Measured under pulse conditions to reduce heating.
- Requires θCS ≤/n6368617200000000000000006°C/W each side, infinite heatsink.
Subscripts 1 and 2 denote the device terminals, MT1 and MT2, respectively. Figure 1. Thermal Circuit, Device Mounted Between Heatsinks
/C0077/C0077/C0084/C0049/C0048/C0086/C0050/C0055/C0053 /C0077/C0077/C0084/C0049/C0048/C0086/C0052/C0048/C0048
4 Motorola Thyristor Device Data
CASE 416A–01 DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.110 0.120 2.79 3.05 B 0.110 0.120 2.79 3.05 C 0.072 0.080 1.83 2.03 E 0.006 0.010 0.15 0.25 N 0.073 0.077 1.85 1.96 R 0.065 0.070 1.65 1.78 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION M AND P MAXIMUM MISALIGNMENT OF HALFS. /C0095/C0095 B N R M P N R NOTE 3 NOTE 3 C A E Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. MMT10V275/D /C0042/C0077/C0077/C0084/C0049/C0048/C0086/C0050/C0055/C0053/C0047/C0068/C0042