MMSA SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Waterproof Panel – The MMSA boasts a waterproof switch and LED panel for use in the most rugged territory.
  • Safe and Reliable – The MMSA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
  • Attractive Styling – The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
  • Versatile Mounting – Mount the MMSA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
  • Low/High Battery Protection – If your battery voltage reaches below 10 VDC or above 17 VDC, the MMSA Series will automatically shut down.
  • Fan Cooled – The MMSA Series is fan cooled, enabling the unit to work well in confined spaces.If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
  • Current Overload Protection – The MMSA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
  • Integrated Programming – The MMSA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
  • Battery Temp Sensor – Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
  • Buy with Ease – The MMSA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty. Introduction The Magnum Energy MMSA Series Inverter/Charger from Sensata Technologies is a pure sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Ideal for Emergency Vehicles, the MMSA is versatile, easy-to-use, lightweight, and provides a reliable base for your energy system. Connect with Ease: The MMSA comes with DC cables with Anderson quick connectors, a GFCI outlet, and an AC input cord. Auxiliary DC Output Port: Add a small load, such as an interior lamp or backup camera, of less than 20 amps. MMSA must be connected to the battery for the AUX output to be available. Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers. Model Numbers
  • MMSA1012 Available For
  • Emergency Vehicle Systems
  • Marine Systems
  • RV Systems
  • Trucks Available Accessories
  • DC Load Disconnect
  • Fuse Blocks
  • MagWeb
  • Remote Monitor - MM-C
  • Remote - ME-ARC
  • Remote - ME-RC
  • Remote - MM-RC Pure Sine Wave 12 1500 VA Battery Voltage Options Continuous Output Options

Copyright © 2019 Sensata Technologies, Inc. www.sensata.com SPECIFICATIONS MMSA1012 INVERTER SPECIFICATIONS Input battery voltage 9 to 17 VDC Nominal AC output voltage 120 VAC ± 5% Output frequency and accuracy 60 Hz ± 0.05% Total Harmonic Distortion (THD) < 5% 1 msec surge current (amps AC) 38 100 msec surge current (amps AC) 21 5 sec surge power (real watts) 1650 30 sec surge power (real watts) 1600 5 min surge power (real watts) 1250 30 min surge power (real watts) 1200 Continuous power output at 45° C 1000 VA Maximum continuous input current 133 ADC Inverter efficiency (peak) 87% Transfer time (typical) 16 msecs Search mode (typical) 5 watts (with no remote) No load (120 VAC output, typical) 22 watts (with no remote) Waveform Pure Sine Wave CHARGER SPECIFICATIONS Continuous output at 45° C 50 ADC Charger efficiency (peak) 84% Power factor > 0.95 Input current at rated output (AC amps) 7 GENERAL FEATURES AND CAPABILITIES Transfer relay capability 20 AAC (input current for charging and pass through) Battery temperature compensation Yes, with ME-BTS Internal cooling 0 to 59 cfm variable speed Overcurrent protection Yes, with two overlapping circuits Overtemperature protection Yes, on transformer and MOSFETS On/Off with status indicator Yes, front mounted and easily accessible Low battery cutout 10 VDC, adjustable with the ME-RC or ME-ARC remote AC output 15 amp GFCI outlet AC input 3 ft AC cord Output circuit breaker 15 AAC Input circuit breaker 15 AAC Listings ETL Listed to UL/cUL458, CSA C22.2 #107.1-01 Warranty Two years

InverterInfo@sensata.com Power Conversion www.magnum-dimensions.com Page 3 Rev: 07/20/19 Part#64-0501 vD Copyright © 2019 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. www.sensata.com ENVIRONMENTAL SPECIFICATIONS Operating temperature -20° C to +60° C (-4° F to 140° F) Nonoperating temperature -40° C to +70° C (-40° F to 158° F) Operating humidity 0 to 95% RH non condensing PHYSICAL SPECIFICATIONS Dimensions (l x w x h) 16.6” x 8.4” x 6.75” (42 cm x 21 cm x 17 cm) Mounting Shelf (top or bottom up) or bulkhead (DC terminals to the right) Weight 24 lb (10.9 kg) Shipping weight 25 lb (11.3 kg) Max operating altitude 15,000’ (4570 m) AGENCY APPROVALS & CERTIFICATIONS

  • ETL Listed to UL/cUL458, CSA C22.2 #107.1-01 Testing for specifications at 45° C, unless otherwise noted. Specifications subject to change without notice. GENERAL NOTES