KITPF0100SKTEVBE FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 12
Technical content
Freescale Semiconductor, Inc. © Freescale Semiconductor, Inc., 2013. All rights reserved. Figure 1. PF Programming Socket (KITPF0100SKTEVBE)
KTPF0100SKTUG User’s Guide Rev. 1.0 6/2013
2 Freescale Semiconductor
1 Kit Contents/Packing List
- KITPF0100SKTEVBE socket board
- Warranty card and technical support brochure 2J u m p S t a r t
- G o t o www.freescale.com/analogtools
- Locate your kit
- Review your Tool Summary Page
- Look for
- Download documents, software and other information Jump Start Your Design
KTPF0100SKTUG User’s Guide Rev. 1.0 6/2013 Freescale Semiconductor, Inc. 3 Important Notice
3 Important Notice
Freescale provides the enclosed product(s) under the following conditions: This evaluation kit is intended for use of ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY. It is provided as a sample IC pre-soldered to a printed circuit board to make it easier to access inputs, outputs, and supply terminals. This EVB may be used with any development system or other source of I/O signals by simply connecting it to the host MCU or computer board via off-the-shelf cables. This EVB is not a Reference Design and is not intended to represent a final design recommendation for any particular application. Final device in an application will be heavily dependent on proper printed circuit board layout and heat sinking design as well as attention to supply filtering, transient suppression, and I/O signal quality. The goods provided may not be complete in terms of required design, marketing, and or manufacturing related protective considerations, including product safety measures typically found in the end product incorporating the goods. Due to the open construction of the product, it is the user's responsibility to take any and all appropriate precautions with regard to electrostatic discharge. In order to minimize risks associated with the customers applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. For any safety concerns, contact Freescale sales and technical support services. Should this evaluation kit not meet the specifications indicated in the kit, it may be returned within 30 days from the date of delivery and will be replaced by a new kit. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typical”, must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale was negligent regarding the design or manufacture of the part.Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2013
4 Freescale Semiconductor
4 Introduction
5 PF Programmer
Figure 2. KITPFPGMEVME PF Series Programmer
6 Additional Required Equipment
- USB-enabled PC with Windows XP or higher
- PF Series Programmer
- Flat ribbon cable (8-conductor)
- Mini USB cable
7 Setting Up and Using the Hardware
- Insert the PF0x00 chip into the socket U1. Make sure pin 1 is correctly located on the top-left corner of the
socket as shown in Figure 3. Figure 3. PF0x00 Pin 1 Location
6 Freescale Semiconductor
- Connect the communication ribbon cable (not included) on J1. Figure 4 shows the correct signal allocation
from the PF Programmer (KITPFPGMEVME) to the KITPF0100SKTEVBE socket board. Figure 4. KITPF0100SKTEVBE Connection Diagram
- Follow the programming procedure outlined in the user’s guide “KITPFPGMEVME Programmer for PF
document as well as related resources.
KTPF0100SKTUG User’s Guide Rev. 1.0 6/2013 Freescale Semiconductor, Inc. 7 Schematic
8 Schematic
MMPF0100NPEP + 56QN50S18080 U1C SW1CIN12 SW1VSSSNS14 SW2IN_123 SW3AFB 38 SW3AIN 37 SW3ALX 36 SW3BFB 33 SW3BIN 34 SW3BLX 35 SW3VSSSNS 32 SW4FB 19 SW4IN 20 SWBSTFB 44 SWBSTIN 45 SWBSTLX 46 SW1AIN7 SW1ALX8 SW1BIN10 SW1BLX9 SW1CFB13 SW1CLX11 SW1FB6 SW2FB25 SW2LX22 SW4LX 21 EPGND57 GNDREF115 SW2IN_224 SCL_TP1 BH3 MTG PWRON_TP1 LED Red AC GPIO2_TP2 4.7K BH2 MTG C4 1uF BH1 MTG VDDOTP_TP1 10uF GPIO2_TP1 C2 1uF 0.1UF LED Green AC 4.7K HDR 2X4 1 2 3 4 7 8 10.0K 10uF DNP +C8 10uF C3 0.1UF CONSUMER/INDUSTRIAL MMPF0100NPEP + 56QN50S18080 U1A ICTEST 5 INTB 1 RESETBMCU 3 SCL54 SDA53 SDWNB 2 STANDBY 4 VCOREDIG51 VCOREREF52 VDDIO55 VDDOTP47 PWRON 56 VCORE49 GNDREF48 VIN50 10uF SDA_TP1 MMPF0100NPEP + 56QN50S18080 U1B VGEN1 16 VGEN2 18 VIN340 VHALF29 VIN117 VGEN6 41 VINREFDDR30 VREFDDR31 VSNVS 43 VGEN3 26 VGEN4 28 VIN227 LICELL 42 VGEN5 39 3V3_TP1 BH4 MTG 10.0K 300
KTPF0100SKTUG User’s Guide Rev. 1.0 6/2013
8 Freescale Semiconductor
9 Board Layout
9.1 Assembly Layer Top
9.2 Assembly Layer Bottom
KTPF0100SKTUG User’s Guide Rev. 1.0 6/2013 Freescale Semiconductor, Inc. 9 Board Layout
9.3 Top Layer Routing
9.4 Bottom Layer Routing
KTPF0100SKTUG User’s Guide Rev. 1.0 6/2013
10 Freescale Semiconductor
10 References
Document Number and Description URL MMPF0100 Data sheet http://www.freescale.com/files/analog/doc/data_sheet/MMPF0100.pdf MMPF0100ER Errata http://www.freescale.com/files/analog/doc/errata/MMPF0100ER.pdf PFSERIESFS Fact Sheet http://www.freescale.com/files/analog/doc/fact_sheet/PFSeriesFS.pdf KTPFPGMEVMEUG User’s Guide http://www.freescale.com/files/analog/doc/user_guide/KTPFPGMEVMEUG.pdf Freescale.com Support Pages URL Product Summary Page http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MMPF0100 Power Management Home Page http://www.freescale.com/PMIC Analog Home Page http://www.freescale.com/analog
KTPF0100SKTUG User’s Guide Rev. 1.0 6/2013 Freescale Semiconductor, Inc. 11
Revision History
Revision Date Description of Changes 1.0 6/2013 Initial Release
Document Number: KTPF0100SKTUG Rev. 1.0 Information in this document is provided solely to enable system and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support other product or service names are the property of their respective owners. © 2013 Freescale Semiconductor, Inc.