MMG3002NT1 MOTOROLA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
Features
- Frequency: 40-3600 MHz
- P1dB: 21 dBm
- Power Gain: 20 dB
- Third Order Output Intercept Point: 37.5 dBm
- Single Voltage Supply
- Internally Matched to 50 Ohms
- Low Cost SOT-89 Surface Mount Package
- Pb-Free Leads
- In Tape and Reel. T1 Suffix = 1000 Units per 12 mm, 7 inch Reel. 1 2 3 CASE 1514-01, STYLE 1 SOT-89 PLASTIC TYPICAL PERFORMANCE (1) Characteristic Symbol 900 MHz 2140 MHz 3500 MHz Unit Power Gain (S21) Gp 20 18 14.5 dB Input Return Loss (S11) IRL -16 -26 -16 dB Output Return Loss (S22) ORL -12 -8 -1 1 dB Power Output @ 1dB Compression P1db 21 21 18.5 dBm Third Order Output Intercept Point IP3 37.5 36 32 dBm (1) VCC = 5.2 Vdc, TC = 25°C, 50 ohm system MAXIMUM RATINGS Rating Symbol Value Unit Supply Voltage (2) VCC 7 V Supply Current (2) ICC 400 mA RF Input Power Pin 12 dBm Storage Temperature Range Tstg -65 to +150 °C Junction Temperature (3) TJ 150 °C (2) Voltage and current applied to device. (3) For reliable operation, the junction temperature should not exceed 150°C. THERMAL CHARACTERISTICS (VCC = 5.2 Vdc, ICC = 110 mA, TC = 25°C) Characteristic Symbol Value (4) Unit Thermal Resistance, Junction to Case RθJC 46.5 °C/W (4) Refer to AN1955/D, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1955. Motorola, Inc. 2004 Order this document by MMG3002NT1/D MOTOROLA SEMICONDUCTOR TECHNICAL DATA For More Information On This Product, Go to: www.freescale.com Rev. 2
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MMG3002NT1 MOTOROLA RF DEVICE DATA For More Information On This Product, Go to: www.freescale.com ELECTRICAL CHARACTERISTICS (VCC = 5.2 Vdc, 900 MHz, TC = 25°C, 50 ohm system, in Motorola Application Circuit) Characteristic Symbol Min Typ Max Unit Power Gain (S21) Gp 19.3 20 dB Input Return Loss (S11) IRL -16 dB Output Return Loss (S22) ORL -12 dB Power Output @ 1dB Compression P1dB 21 dBm Third Order Output Intercept Point IP3 37.5 dBm Noise Figure NF 4.2 dB Supply Current (1) ICC 95 110 125 mA Supply Voltage (1) VCC 5.2 V (1) For reliable operation, the junction temperature should not exceed 150 °C.
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MMG3002NT1MOTOROLA RF DEVICE DATA 3For More Information On This Product, Go to: www.freescale.com FUNCTIONAL PIN DESCRIPTION Pin Number Pin Function
1 RFin
2 Ground
3 RFout/DC Supply
ESD PROTECTION CHARACTERISTICS Test Conditions/Test Methodology Class Human Body Model (per JESD 22-A114-G) 1B (Minimum) Machine Model (per EIA/JESD 22-A115-A) A (Minimum) Charge Device Model (per JESD 22-C101-A) IV (Minimum) MOISTURE SENSITIVITY LEVEL Test Methodology Rating Per JESD 22-A113 1 FUNCTIONAL DIAGRAM 321
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc.
50 OHM TYPICAL CHARACTERISTICS
Figure 1. Unmatched Power Gain (S21) versus Figure 2. Unmatched Input/Output Figure 3. Power Gain versus Output Power
900 MHz
2140 MHz
Figure 4. P1dB versus Frequency Figure 5. Collector Current versus Collector Figure 6. Third Order Output Intercept Point
2600 MHz
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. Figure 7. Third Order Output Intercept Point Figure 8. Third Order Output Intercept Point Figure 9. Third Order Intermodulation versus Figure 10. MTTF versus Junction Temperature Figure 11. Noise Figure versus Frequency Figure 12. Single-Carrier W-CDMA Adjacent
8 Vdc Supply with 25 /C0087 Dropping Resistor
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc.
50 OHM APPLICATION CIRCUIT: 40-800 MHz
Figure 13. 50 Ohm Test Circuit Schematic Figure 14. S21, S11 and S22 versus Frequency Figure 15. 50 Ohm Test Circuit Component Layout Table 1. 50 Ohm Test Circuit Component Designations and Values Table 2. Supply Voltage versus R1 Values NOTE: To provide VCC = 5.2 Vdc and ICC = 110 mA at the device.
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc.
50 OHM APPLICATION CIRCUIT: 800-3400 MHz
Figure 16. 50 Ohm Test Circuit Schematic Figure 17. S21, S11 and S22 versus Frequency Figure 18. 50 Ohm Test Circuit Component Layout Table 3. 50 Ohm Test Circuit Component Designations and Values
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. Table 5. Class A Common Emitter S-Parameters at V CC = 5.2 Vdc, ICC = 110 mA, TC = 25/C0053C
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. Table 5. Class A Common Emitter S-Parameters at V CC = 5.2 Vdc, ICC = 110 mA, TC = 25/C0053C (continued)
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. Figure 22. Recommended Mounting Configuration
- THERMAL AND RF GROUNDING CONSIDERATIONS SHOULD BE
- DEPENDING ON PCB DESIGN RULES, AS MANY VIAS AS
POSSIBLE SHOULD BE PLACED ON THE LANDING PATTERN.
- IF VIAS CANNOT BE PLACED ON THE LANDING PATTERN, THEN
- RECOMMENDED VIA PATTERN SHOWN HAS 0.381 x 0.762 MM
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MMG3002NT1 MOTOROLA RF DEVICE DATA For More Information On This Product, Go to: www.freescale.com NOTES
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MMG3002NT1MOTOROLA RF DEVICE DATA 13For More Information On This Product, Go to: www.freescale.com NOTES
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MMG3002NT1 MOTOROLA RF DEVICE DATA For More Information On This Product, Go to: www.freescale.com NOTES
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MMG3002NT1MOTOROLA RF DEVICE DATA 15For More Information On This Product, Go to: www.freescale.com PACKAGE DIMENSIONS 2X 4 TYP E.P. 2X R0.20 SEATING PLANE C 0.10 C 1.50 1.50 0.46 0.40 1.70 1.40 2X 4 TYP 1.35 1.25 0.65 0.55 1.65 1.55CASE 1514-01 ISSUE A
0.15 M ACB
A 4.70 4.40 0.60 0.40B 2.70 2.40 1.30 0.70 0.48 0.38 0.58 0.48 12 3 0.48 0.38 4.50 3.70 2X R0.15 TYP 1.87 1.79
0.20 M CB
STYLE 1: PIN 1. RF INPUT 2. GROUND 3. RF OUTPUT NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. ALL DIMENSIONS ARE IN MILLIMETERS. 3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.5MM PER END. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.5MM PER SIDE. 4. DIMENSIONS ARE DETERMINED AT THE OUTMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 5. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. SOT-89 PLASTIC
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MMG3002NT1 MOTOROLA RF DEVICE DATA For More Information On This Product, Go to: www.freescale.com Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All oper ating parameters, including Typicals, must be validated for each customer application by customers technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. /C0069 Motorola Inc. 2004 HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, Motorola Literature Distribution 3-20-1, Minami-Azabu, Minato-ku, Tokyo 106-8573, Japan P.O. Box 5405, Denver, Colorado 80217 81-3- 3440-3569 1-800-521-6274 or 480-768-2130 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852-26668334 HOME PAGE: http://www.freescale.com MMG3002NT1/D For More Information On This Product, Go to: www.freescale.com