MMG1001R2 FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
- Specified for 79-, 112- and 132-Channel Loading
- Excellent Distortion Performance
- Built-in Input Diode Protection
- GaAs FET Transistor Technology
- Unconditionally Stable Under All Load Conditions
- In Tape and Reel. R2 Suffix = 1,500 Units per 16 mm, 13 inch Reel. T1 Suffix = 1,000 Units per 16 mm, 13 inch Reel.
Applications
- CATV Systems Operating in the 40 to 870 MHz Frequency Range
- Input Stage Amplifier in Optical Nodes, Line Extenders and Trunk Distribution Amplifiers for CATV Systems
- Output Stage Amplifier on Applications Requiring Low Power Dissipation and High Output Performance
- Driver Amplifier in Linear General Purpose Applications
Description
- 24 Vdc Supply or 12 Vdc Supply with Bias Change, 40 to 870 MHz, CATV Integrated Forward Amplifier Module
Table 1. Maximum Ratings Table 2. Thermal Characteristics
870 MHz
Figure 1. Functional Diagram Figure 2. Pin Connections Freescale Semiconductor, Inc., 2005. All rights reserved.
Table 3. ESD Protection Characteristics Table 4. Moisture Sensitivity Level Table 5. Electrical Characteristics for 24 V Application (VCC = 24 Vdc, TC = +30°C, 75 Ω system unless otherwise noted)
Table 4. Electrical Characteristics for 12 V Application (VCC = 12 Vdc, TC = +30°C, 75 Ω system unless otherwise noted)
Figure 3. MMG1001 50-870 MHz Test Circuit Schematic Table 6. MMG1001 50-870 MHz Test Circuit Component Designations and Values
Figure 4. MMG1001 50-870 MHz Test Circuit Component Layout on form, fit or function of the current product.
A 2.000 2.300 A1 0.025 0.100 A2 1.950 2.100 D 6.950 7.100 D1 4.372 5.180 E 8.850 9.150 E1 6.950 7.100 E2 4.372 5.180 L 0.466 0.720 L1 0.250 BSC b 0.300 0.432 b1 0.300 0.375 c 0.180 0.279 c1 0.180 0.230 e 0.800 BSC h −−− 0.600 /C0113 0 7 aaa 0.200 bbb 0.200 ccc 0.100 NOTES: 1. CONTROLLING DIMENSION: MILLIMETER. 2. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DATUM PLANE −H− IS LOCATED AT BOTTOM OF LEAD AND IS COINCIDENT WITH THE LEAD WHERE THE LEAD EXITS THE PLASTIC BODY AT THE BOTTOM OF THE PARTING LINE. 4. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.250 PER SIDE. DIMENSIONS D AND E1 DO INCLUDE MOLD MISMATCH AND ARE DETERMINED AT DATUM PLANE −H−. 5. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION IS 0.127 TOTAL IN EXCESS OF THE b DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. DATUMS −A− AND −B− TO BE DETERMINED AT DATUM PLANE −H−. BOTTOM VIEW /C0095/C0095 e/2 SBMbbb C D X 45 /C0095he14 x 8X E A2A SEATING PLANE DATUM PLANE GAUGE PLANE 1.000 L W W 0.039 ccc C DETAIL Y SECT W-W c c1 b ÇÇÇ ÇÇÇ ÉÉÉ ÉÉÉ SAMaaa C /C0113 A B H C Y PFP-16
Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customers technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale/C0116 and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. Freescale Semiconductor, Inc. 2005. All rights reserved. How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler , Arizona 85224 +1-800-521-6274 or +1-480-768- 2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675- 2140 Fax: 303-675- 2150 LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MMG1001 Rev. 5, 7/2005