MMBT1015-GR-AL3-R

MMBT1015 UTC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

UNISONIC TECHNOLOGIES CO., LTD MMBT1015 PNP SILICON TRANSISTOR w w w . u n i s o n i c . c o m . t w 1 of 4 Copyright © 2005 Unisonic Technologies Co., Ltd QW-R206-015,E LOW FREQUENCY PNP AMPLIFIER TRANSISTOR „ FEATURES *Collector-Emitter Voltage: B V CEO=-50V *Collector current up to 150mA *High h FE linearity *Complement to MMBT1815 SOT-23 SOT-523 SOT-113 SOT-323 *Pb-free plating product number:MMBT1015L „ ORDERING INFORMATION Order Number Pin Assignment Normal Lead Free Plating Package 1 2 3 Packing MMBT1015-x-AC3-R MMBT1015L-x-AC3-R SOT-113 E B C Tape Reel MMBT1015-x-AE3-R MMBT1015L-x-AE3-R SOT-23 E B C Tape Reel MMBT1015-x-AL3-R MMBT1015L-x-AL3-R SOT-323 E B C Tape Reel MMBT1015-x-AN3-R MMBT1015L-x-AN3-R SOT-523 E B C Tape Reel MMBT1015L-x-AC3-R (1)Packing Type (2)Package Type (3)Rank (4)Lead Plating (1) R: Tape Reel (2) AC3: SOT-113, AE3: SOT-23, AL3: SOT323, AN3: SOT-523 (3) x: refer to Classification of hFE1 (4) L: Lead Free Plating , Blank: Pb/Sn „ MARKING A4 Lead Plating

MMBT1015 PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 2 of 4 www.unisonic.com.tw QW-R206-015,E „ ABSOLUTE MAXIMUM RATING ( Ta=25°C , unless otherwise specified ) PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage V CBO -50 V Collector-Emitter Voltage V CEO -50 V Emitter-Base Voltage V EBO -5 V SOT-23 250 mW Collector Dissipation SOT-523/SOT-113/SOT-323 PC 200 mW Collector Current I C -150 mA Base Current I B -50 mA Junction Temperature T J 125 Ċ Storage Temperature T STG -55 ~ +150 Ċ Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. „ ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Collector-Base Breakdown Voltage BV CBO Ic = -100µA, IE = 0 -50 V Collector-Emitter Breakdown Voltage BV CEO Ic = -10mA, IB = 0 -50 V Emitter-Base Breakdown Voltage BV EBO IE = -10µA, Ic = 0 -5 V Collector-Emitter Saturation Voltage V CE(SAT) Ic = -100mA, IB = -10mA -0.1 -0.3 V Base-Emitter Saturation Voltage V BE(SAT) Ic = -100mA, IB = -10mA -1.1 V Collector Cut-off Current I CBO V CB = -50V, IE = 0 -100 nA Emitter Cut-off Current I EBO V EB = -5V, Ic = 0 -100 nA hFE1 V CE = -6V, Ic = -2mA 120 700 DC Current Gain hFE2 V CE = -6V, Ic = -150mA 25 Transition Frequency f T V CE = -10V, Ic = -1mA 80 MHz Output Capacitance C OB V CB = -10V, IE = 0, f = 1MHz 4.0 7.0 pF Noise Figure NF Ic = -0.1mA, VCE = -6V RG= 1kΩ, f = 100Hz 0.5 6 dB „ CLASSIFICATION OF hFE1 RANK Y GR BL RANGE 120-240 200-400 350-700

MMBT1015 PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 3 of 4 www.unisonic.com.tw QW-R206-015,E „ TYPICAL CHARACTERISTICS Static Characteristics Collector -Emitter Voltage ( V) Collector Current, Ic (mA) -1 0 -2 0 -30 -4 0 -5 0 IB =-50 µA IB = -100 µA IB = -150 µA IB = -200 µA IB = -250 µA IB = -300 µA DC Current Gain Collector Current , Ic (mA) DC Current Gain, h FE 102 100 103 V CE =-6 V Base-Emitter on Voltage Collector Current, Ic (mA) Base -Emitter Voltage (V) V CE =-6 V -10-1 -100 -101 -102 Collector Current , Ic (mA) Saturation Voltage (V) -101 Saturation Voltage V C E(SAT ) V BE (SAT ) Ic=10*I B -1 0 -1 0 -1 00 Current Gain-B andwidth Product Collector Output Capacitance Collector Current , Ic (mA) 103 Current Gain-Bandwidth product,fT (MHz) 100 101 102 VCE =- 6V Collector -Base Voltage (V) Capacitance, Cob (pF) 100 101 102 f= 1MHz I E=0 -10 -1 0 -10 -1 0 -1 0 -1 0 -10 -10 -10-1 10-1

MMBT1015 PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 4 of 4 www.unisonic.com.tw QW-R206-015,E UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.