MMB-0207

MMU-0102 TFUNK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 1 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Professional Thin Film MELF Resistors MMU 0102, MMA 0204, and MMB 0207 professional thin film MELF resistors are the perfect choice for most fields of modern professional electr onics where reliability and stability is of major concern. The typical applications in the fields of automotive, telecommunication and medical equipment reflect the outstanding level of proven reliability.

FEATURES

• Approved according to EN 140401-803
• AEC-Q200 qualified
• Advanced metal film technology
• Excellent overall stability: exceeds class 0.25
• Best in class pulse load capability
• Intrinsic sulfur resistance
• Material categorization:  for definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive
• Telecommunication
• Industrial
• Medical equipment Note (1) Please refer to APPLICATION INFORMATION below.

APPLICATION INFORMATION

When the resistor dissipates power, a te mperature rise above the ambient tempera ture occurs, depend ent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissibl e limits. However, re sistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. TECHNICAL SPECIFICATIONS DESCRIPTION MMU 0102 MMA 0204 MMB 0207 DIN size 0102 0204 0207 Metric size code RC2211M RC3715M RC6123M Resistance range 0.22  to 2.21 M; 0 0.22  to 10 M; 0 0.1  to 15 M; 0  Temperature coefficient ± 50 ppm/K; ± 25 ppm/K ± 100 ppm/K; ± 50 ppm/K; ± 25 ppm/K Rated dissipation, P 70 (1) 0.3 W 0.4 W 1.0 W Operating voltage, Umax. ACRMS/DC 150 V 200 V 350 V Permissible film temperature, F max. (1) 155 °C Operating temperature range (1) -55 °C to 155 °C Permissible voltage against ambient (insulation): 1 min, Uins 200 V 300 V 500 V Failure rate: FITobserved 0.1 x 109/h

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 2 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

• The presented operation modes do not refer to different types of resistors, but actually show examples of different loads, tha t lead to different film temperatures and different achievable load-life st ability (drift) of the resistance value. A suitable low therma l resistance of the circuit board assemb ly must be safeguarded in order to maintain the film temperature of the resistors within the specified limi ts. Please consider the application note “Thermal Management in Surface-Mounted Resistor Applications” ( www.vishay.com/doc?28844 ) for information on the general nature of thermal resistance. Note (1) Approval according to EN 140401-803 not available. MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION OPERATION MODE STANDARD POWER Rated dissipation, P MMU 0102 0.2 W 0.3 W MMA 0204 0.25 W 0.4 W MMB 0207 0.4 W 1.0 W Operating temperature range -55 °C to 125 °C -55 °C to 155 °C Permissible film temperature, F max. 125 °C 155 °C Max. resistance change at P70 for resistance range, |R/R| after: MMU 0102 0.22  to 221 k 0.22  to 221 k MMA 0204 0.22  to 332 k 0.22  to 332 k MMB 0207 0.1  to 1 M 0.1  to 1 M TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE/SIZE TCR TOLERANCE RESISTANCE E-SERIES MMU 0102 ± 50 ppm/K E24 ± 2 % 1  to 9.1  ± 1 % 10  to 2.21 M E24; E96 ± 0.5 % 10  to 221 k E24; E192 ± 25 ppm/K ± 1 % 10  to 221 k E24; E96 ± 0.5 % 10  to 221 k E24; E192 Jumper; I max. = 2 A  10 m 0  - MMA 0204 ± 50 ppm/K E24 ± 1 % 1  to 10 M E24; E96 ± 0.5 % 10  to 2.21 M E24; E192 ± 25 ppm/K ± 1 % 10  to 511 k E24; E96 ± 0.5 % 10  to 511 k E24; E192 Jumper; Imax. = 3 A  10 m 0  - MMB 0207 ± 100 ppm/K E24 ± 50 ppm/K ± 1 % 1  to 15 M E24; E96 ± 25 ppm/K ± 0.5 % 10  to 1 M E24; E192 Jumper; Imax. = 5 A  10 m 0  -

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 3 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

• Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION. PACKAGING TYPE/SIZE CODE QUANTITY PAC KAGING STYLE WIDTH PITCH PACKAGING DIMENSIONS MMU 0102 B3 = BL 3000 Antistatic blister tape acc. IEC 60286-3, Type 2a 8 mm 4 mm Ø 180 mm/7" B0 10 000 Ø 330 mm/13" M8 8000 Bulk case acc. IEC 60286-6 -- - MMA 0204 B3 = BL 3000 Antistatic blister tape acc. IEC 60286-3, Type 2a 8 mm 4 mm Ø 180 mm/7" B0 10 000 Ø 330 mm/13" M3 3000 Bulk case acc. IEC 60286-6 -- - MMB 0207 B2 2000 Antistatic blister tape acc. IEC 60286-3, Type 2a 12 mm 4 mm Ø 180 mm/7" B7 7000 Ø 330 mm/13" PART NUMBER AND PRODUCT DESCRIPTION Part Number: MMB02070D5620DB200 Part Number: MMB02070Z0000ZB200 TYPE/SIZE VERSION TCR RESISTANCE TOLERANCE PACKAGING MMU 0102 MMA 0204 MMB 0207 0 = EN 140401-803, “Version A” D = ± 25 ppm/K C = ± 50 ppm/K B = ± 100 ppm/K Z = Jumper 3 digit value 1 digit multiplier Multiplier 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 0000 = Jumper D = ± 0.5 % F = ± 1 % G = ± 2 % J = ± 5 % Z = Jumper Product Description: MMB 0207-25 0.5% B2 562R Product Description: MMB 0207 B2 0R0 MMB 0207 -25 0.5 % B2 562R MMA 0207 - - B2 0R0 TYPE SIZE TCR TOLERANCE PACKAGING RESISTANCE MMU MMA MMB 0102 0204 0207 ± 25 ppm/K ± 50 ppm/K ± 100 ppm/K ± 0.5 % ± 1 % ± 2 % ± 5 % BL 562R = 562  0R0 = Jumper M B02070Z0M 00ZB2 000 M B02070D5M 20D B2 006

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 4 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DESCRIPTION

Production is strictly controlled and follows an extensive set of instructions establishe d for reproducibility. A homogeneous film of metal al loy is deposited on a high grade ceramic body (Al2O3) and conditioned to achieve the desired temperature coefficient. Nickel plated steel termination caps are firmly pressed on the metallised rods. A special laser is used to achieve the target value by smoothly cutting a helical groove in the resistive layer without damaging the ceramics. The resistor elements are covered by a protective coatin g designed for electrical, mechanical and climatic protection. The terminations receive a final pure matte tin on nickel plating. Four or five color code rings designate the resistance value and tolerance in accordance with IEC 60062 (1). The result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. This in cludes full screening for the elimination of products with a potential risk of early field failures (feasible for R  10 ) according to EN 140401-803, 2.1.2.2. Only accepted products are laid directly into the blister tape in accordance with IEC 60286-3, Type 2a (1) or bulk case in accordance with IEC 60286-6 (1). ASSEMBLY The resistors are suitable for processing on automatic SMD assembly systems. They are suitable for automatic soldering using wave, reflow or vapor phase as shown in IEC 61760-1 (1). The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, es ters and aqueous solutions. The suitability of conformal coatings, potting compounds and their processes, if applie d, shall be qualified by appropriate means to ensure th e long term stability of the whole system. The resistors are completely lead (Pb)-free, the pure matte tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes. Solderability is specified for 2 years after production or requalification, however, excellent solderability is proven after extended storage in excess of 10 years. The permitted storage time is 20 years. The immunity of the plating against tin whisker growth has been proven under extensive testing. MATERIALS Vishay acknowledges the following systems for the regulation of hazardous substances:

• IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry, with the list of declarable substances given therein (2)
• The Global Automotive Declarable Substance List (GADSL) (3)
• The REACH regulation (1907/2006/EC) and the related list of substances with very high concern (SVHC) (4) for its supply chain The products do not contain any of the banned substances as per IEC 62474, GADSL, or the SVHC list, see www.vishay.com/how/leadfree Hence the products fully comply with the following directives:
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and Annex II (ELV II)
• 2011/65/EU Restriction of the Use of Hazardous Substances Directive (RoHS) with amendment 2015/863/EU
• 2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE) Vishay pursues the elimination of conflict minerals from its supply chain, see the Conflict Minerals Policy at www.vishay.com/doc?49037 APPROVALS The resistors are approved wi thin the IECQ-CECC Quality Assessment System for Electronic Components according to table “Temperature Coefficient and Resistance Range” to the detail specification EN 140401-803 which refers to EN 60115-1, EN 60115-8 and the variety of environmental test procedures of the IEC 60068 (1) series. Conformity is attested by the use of the CECC logo ( ) as the mark of conformity on the package label. Vishay Beyschlag has achieved “ Approval of Manufacturer ” in accordance with IECQ 03-1. The release certificate for “Technology Approval Schedule ” in accordance with CECC 240001 based on IECQ 03-3-1 is granted for the Vishay Beyschlag manufacturing process. The resistors are qualified according to AEC-Q200.

RELATED PRODUCTS

For products with precision specification see the datasheet:

• “Precision Thin Film MELF Resistors”  (www.vishay.com/doc?28714)
• “Ultra Precision Thin Film MELF Resistors”  (www.vishay.com/doc?28715) Resistors are available with established reliability in accordance with EN 140 401-803 Version E. Please refer to datasheet “MELF Resistors wi th Establishe d Reliability”. (www.vishay.com/doc?28707 Notes (1) The quoted IEC standards are also released as EN standards with the same number and identical contents. (2) The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474. (3) The Global Automotive Declarable Substance List (GADSL) is ma intained by the American Chemistry Council and available at www.gadsl.org. (4) The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table.

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 5 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FUNCTIONAL PERFORMANCE C100 150 - 50 0 50 0.5 W Power Dissipation P ϑAmbient Temperature amb MMB 0207 MMU 0102 MMA 0204 Derating - Standard Operation Mode C100 150 - 50 0 50 0.5 W Power Dissipation P MMB 0207 MMU 0102 MMA 0204 ambϑAmbient Temperature Derating - Power Operation Mode MMB 0207 MMU 0102 MMA 0204 W 100 0.1 10 s1 s100 ms10 ms1 ms100 µs10 µs1 µs Pulse Duration ti Single Pulse for R < 10 Ω Maximum pulse load, single pulse; applicable if P 0 and n ≤ 1000 and U ≤ Umax.; for permissible resistance change ± (0.5 % R + 0.01 Ω) Pulse Load Pmax.

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 6 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 W MMB 0207 MMU 0102 MMA 0204100 0.1 10 s1 s100 ms10 ms1 ms100 µs10 µs1 µs Continuous Pulse for R < 10 Ω Pulse Duration ti Continuous Pulse Load Pmax. Maximum pulse load, continuous pulse; applicable if P ≤ P (ϑamb) and U ≤ Umax.; for permissible resistance change ± (0.5 % R + 0.01 Ω) MMB 0207 MMU 0102 MMA 0204 W 1000 100 0.1 10 s1 s100 ms10 ms1 ms100 µs10 µs1 µs Pulse Duration ti Single Pulse for R ≥ 10 Ω Maximum pulse load, single pulse; applicable if P 0 and n ≤ 1000 and U ≤ Umax.; for permissible resistance change ± (0.5 % R + 0.01 Ω) Pulse Load P W MMB 0207 MMU 0102 MMA 0204 1000 100 0.1 10 s1 s100 ms10 ms1 ms100 µs10 µs1 µs Continuous Pulse for R ≥ 10 Ω Pulse Duration ti Maximum pulse load, continuous pulse; applicable if P ≤ P (ϑamb) and U ≤ Umax.; for permissible resistance change ± (0.5 % R + 0.01 Ω) Pulse Load P

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 7 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V 1000 Pulse Duration ti Pulse Voltage Maximum pulse voltage, single and continuous pulses; applicable if P ≤ Pmax.; for permissible resistance change ± (0.5 % R + 0.01 Ω) Pulse Voltage Umax. 100 10 s1 s100 ms10 ms1 ms100 µs1 µs 10 µs MMB 0207 MMU 0102 MMA 0204 100 V 1 kV 10 V 10 kV Pulse Voltage U 100 Ω 1 kΩ 10 k Ω 100 k Ω 1 MΩ 10 Ω 10 MΩ alue RResistance V 1.2 / 50 Pulse Pulse load rating in accordance with IEC 60 115-1, 4.27; 1.2 μs / 50 μs; 5 pulses at 12 s intervals; for permissible resistance change ± (0.5 % R + 0.05 Ω) MMB 0207 MMU 0102 MMA 0204 100 Ω 1 kΩ 10 kΩ 100 V 100 kΩ 1 M Ω 1 kV 10 V 10 kV 10 Ω 10 MΩ Resistance Value R 10 / 700 Pulse Pulse load rating in accordance with IEC 60115-1, 4.27; 10 μs / 700 μs; 10 pulses at 1 minute intervals; for permissible resistance change ± (0.5 % R + 0.05 Ω) Pulse Voltage U MMB 0207 MMU 0102 MMA 0204

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 8 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Current Noise Voltage Ratio 0.01 100 Ω 0.1 µV/V Resistance Value R Current Noise Voltage Ratio In accordance with IEC 60195 1 kΩ 10 kΩ 100 kΩ 1 MΩ 10 MΩ MMB 0207 MMU 0102 MMA 0204 0.1 0.3 1 GHz 3 0.5 1.0 1.5 2.0 IZI/R Frequency f RF - Behavior |Z|/R for 49.9 Ω MELF resistors MMB 0207 MMU 0102 MMA 0204

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 9 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TESTS AND REQUIREMENTS All tests are carried out in accordance with the following specifications: EN 60115-1, generic specification EN 60115-8 (successor of EN 140400), sectional specification EN 140401-803, detail specification IEC 60068-2-xx, test methods The components are appro ved under the IECQ-CECC quality assessment system for electronic components according to table “Temperature Coefficient and Resistance Range”. The parameters stated in the Test Procedures and Requirements table are based on the required tests and permitted limits of EN 140401-803. The table presents only the most important tests, for th e full test schedule refer to the documents listed above. However, some additional tests and a number of improvements against those minimum requirements have been included. The testing also covers most of the requirements specified by EIA/ECA-703 and JIS-C-5201-1. The tests are carried out under standard atmospheric conditions in accordance with IEC 60068-1, 4.3, whereupon the following values are applied: Temperature: 15 °C to 35 °C Relative humidity: 25 % to 75 % Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar) A climatic category LCT / UCT / 56 is applied, defined by the lower category temperature (LCT), the upper category temperature (UCT), and the du ration of exposure in the damp heat, steady state test (56 days). The components are mounted for testing on printed circuit boards in accordance with EN 60115-8, 2.4.2, unless otherwise specified. TEST PROCEDURES AND REQUIREMENTS EN 60 115-1 CLAUSE IEC 60 068-2 (1) TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) Stability for product types: STABILITY CLASS 0.25 OR BETTER STABILITY CLASS 0.5 OR BETTER STABILITY CLASS 1 OR BETTER STABILITY CLASS 2 OR BETTER MMU 0102 10  to 221 k 1  to < 10  < 1  > 221 k MMA 0204 10  to 332 k 1  to < 10  < 1  > 332 k MMB 0207 10  to 1 M 1  to < 10  < 1  > 1 M 4.5 - Resistance - ± 1 % R; ±0.5 % R ± 2 % R; ±1 % R ± 5 % R; ± 2 % R; ±1 % R ± 1 % R 4.8 - Temperature coefficient At (20/-55/20) °C and (20/125/20) °C ± 100 ppm/K, ± 50 ppm/K, ± 25 ppm/K 4.25.1 - Endurance at 70 °C: Standard operation mode U = or U = Umax.; whichever is the less severe; 1.5 h on; 0.5 h off; + 10 m) + 10 m) Endurance at 70 °C: Power operation mode U = or U = Umax.; whichever is the less severe; 1.5 h on; 0.5 h off; + 10 m) + 10 m) 4.25.3  Endurance at upper category temperature + 5 m) ±(0.25 % R + 5 m) ±(0.5 % R + 5 m) ±(1 % R + 5 m) + 5 m) ±(0.5 % R + 5 m) ±(1 % R + 10 m) ±(2 % R + 5 m) 4.24 78 (Cab) Damp heat, steady state (93 ± 3) % RH ±(0.15 % R + 10 m) ±(0.5 % R + 10 m) ±(1 % R + 10 m) ±(1 % R + 10 m) 4.37 67 (Cy) Damp heat, steady state, accelerated (85 ± 2)C; (85 ± 5) % RH; U = 0.3 x 100 V and U = 0.3 x Umax.; (the smaller value is valid) 1000 h ±(0.25 % R + 10 m) ±(0.5 % R + 10 m) ±(1 % R + 10 m) ±(2 % R + 10 m) P70 x R P70 x R P70 x R

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 10 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

4.23 Climatic

sequence: ± (0.15 % R + 10 m) ± (0.5 % R + 10 m) ± (1 % R + 10 m) ± (1 % R + 10 m) 4.23.2 2 (Bb) Dry heat UCT; 16 h 4.23.3 30 (Db) Damp heat, cyclic 1 cycle 4.23.4 1 (Ab) Cold LCT; 2 h 4.23.5 13 (M) Low air pressure 8.5 kPa; 2 h; (25 ± 10) °C 4.23.6 30 (Db) Damp heat, cyclic 5 cycles 4.23.7 - DC load U = or U max.; 1 min. LCT = - 55 °C; UCT = 155 °C + 5 m) 4.19 14 (Na) Rapid change of temperature 30 min at LCT; 30 min at UCT; LCT = - 55 °C; UCT = 125 °C + 10 m) + 10 m) LCT = - 55 °C; UCT = 155 °C + 10 m) 4.13 - Short time overload: Standard operation mode U = 2.5 x or U = 2 × Umax.; whichever is the less severe; 5 s + 5 m) Short time overload: Power operation mode + 5 m) 4.27 - Single pulse high voltage overload: Standard operation mode Severity no. 4: U = 10 x or U = 2 x U max.; whichever is the less severe; 10 pulses 10 μs/700 μs Single pulse high voltage overload: Power operation mode ± (0.5 % R + 5 m) TEST PROCEDURES AND REQUIREMENTS EN 60 115-1 CLAUSE IEC 60 068-2 (1) TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) Stability for product types: STABILITY CLASS 0.25 OR BETTER STABILITY CLASS 0.5 OR BETTER STABILITY CLASS 1 OR BETTER STABILITY CLASS 2 OR BETTER MMU 0102 10  to 221 k 1  to < 10  < 1  > 221 k MMA 0204 10  to 332 k 1  to < 10  < 1  > 332 k MMB 0207 10  to 1 M 1  to < 10  < 1  > 1 M P70 x R P70 x R P70 x R

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 11 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) The quoted IEC standards are also released as EN standards with the same number and identical contents. (2) Special requirements apply to MICRO-MELF, MMU 0102: 4.39 - Periodic electric overload: Standard operation mode U = or U = 2 x Umax.; whichever is the less severe; 0.1 s on; 2.5 s off; 1000 cycles ± (0.5 % R + 5 m) Periodic electric overload: Power operation mode ± (1 % R + 5 m) 4.22 6 (Fc) Vibration Endurance by sweeping;

10 Hz to 2000 Hz;

no resonance; amplitude 1.5 mm or  200 m/s2; 7.5 h + 5 m) 4.38 - Electrostatic discharge (Human Body Model) IEC 61340-3-1 (1); 3 pos. + 3 neg. discharges MMU 0102: 1.5 kV MMA 0204: 2 kV MMB 0207: 4 kV 4.17 58 (Td) Solderability Solder bath method; SnPb40; non-activated flux; Good tinning ( 95 % covered); no visible damage Solder bath method; SnAg3Cu0.5 or SnAg3.5; non-activated flux; Good tinning ( 95 % covered); no visible damage 4.18 58 (Td) Resistance to soldering heat Solder bath method; ±(0.05 % R + 10 m) ±(0.1 % R + 10 m) ±(0.25 % R + 10 m) ±(0.25 % R + 10 m) Reflow method 2 (IR/forced gas convection); ±(0.02 % R + 10 m) ±(0.05 % R + 10 m) ±(0.05 % R + 10 m) ±(0.1 % R + 10 m) 4.29 45 (XA) Component solvent resistance Isopropyl alcohol; 50 °C; method 2 No visible damage 4.30 45 (XA) Solvent resistance of marking Isopropyl alcohol; 50 °C; method 1, toothbrush Marking legible; no visible damage 4.32 21 (Ue 3) Shear (adhesion) 45 N No visible damage 4.33 21 (Ue 1) Substrate bending Depth 2 mm, 3 times No visible damage, no open circuit in bent position 4.7 - Voltage proof URMS = Uins; 60 s No flashover or breakdown 4.35 - Flammability IEC 60695-11-5 (1), needle flame test; 10 s No burning after 30 s TEST PROCEDURES AND REQUIREMENTS EN 60 115-1 CLAUSE IEC 60 068-2 (1) TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) Stability for product types: STABILITY CLASS 0.25 OR BETTER STABILITY CLASS 0.5 OR BETTER STABILITY CLASS 1 OR BETTER STABILITY CLASS 2 OR BETTER MMU 0102 10  to 221 k 1  to < 10  < 1  > 221 k MMA 0204 10  to 332 k 1  to < 10  < 1  > 332 k MMB 0207 10  to 1 M 1  to < 10  < 1  > 1 M 15 x P70 x R

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 12 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS Note

• Color code marking is a pplied according to IEC 60062 (1) in four bands (E24 series ) or five bands (E96 or E192 series). Each color band appears as a single solid line, voids are permissible if at least 2/3 of the band is visible from each radial angle of view. The last color band for tolerance is approximately 50 % wider than the other bands. An interrupted yellow band between the 4th and 5th full band indicates TC25. PATTERN STYLES FOR MELF RESISTORS Notes
• The given solder pad dime nsions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 611 88-5-x (1), or in publication IPC-7351. (1) The quoted IEC standards are also released as EN standards with the same number and identical contents. DIMENSIONS AND MASS TYPE/SIZE L (mm) D (mm) L1 min. (mm) (mm) K (mm) MASS (mg) RECOMMENDED SOLDER PAD DIMENSIONS TYPE/SIZE WAVE SOLDERING REFLOW SOLDERING G (mm) Y (mm) X (mm) Z (mm) G (mm) Y (mm) X (mm) Z (mm) L1K D1 D L G X Y Z

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Revision: 29-Mar-16 13 Document Number: 28713 For technical questions, contact: melf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HISTORICAL 12NC INFORMATION

• The resistors had a 12-digit numeric code starting with 2312.
• The subsequent 4 digits in dicated the resistor type, specification and packaging; see the 12NC table.
• The remaining 4 digits indicated the resistance value: - The first 3 digits indicated the resistance value. - The last digit indicated the resistance decade in accordance with the 12NC Indicating Resistance Decade table. Last Digit of 12NC Indicating Resistance Decade Historical 12NC The 12NC of a MMU 0102 resistor, value 47 k. and TCR 50 with ± 1 % tolerance, supplied in blister tape of 3000 units per reel is: 2312 165 14703. RESISTANCE DECADE LAST DIGIT 0.1  to 0.999  7 1  to 9.99  8 10  to 99.9  9 100  to 999.9  1 1 k to 9.99 k 2 10 k to 99.9 k 3 100 k to 999 k 4 1 M to 9.99 M 5 10 M to 99.9 M 6 HISTORICAL 12NC - Resistor type and packaging BLISTER TAPE ON REEL BULK CASE TYPE TCR TOL. BL

3000 UNITS

8000 UNITS

± 50 ppm/K Jumper 165 90001 175 90001 060 90001 TYPE TCR TOL. BL ± 50 ppm/K Jumper 155 90001 145 90001 040 90001 TYPE TCR TOL. B2

2000 UNITS

7000 UNITS

± 50 ppm/K Jumper 195 90001 185 90001

www.vishay.com Vishay Revision: 13-Jun-16 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.