MMAS40G10D MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Minimum Full Scale Measurement ± 40g
  • Calibrated, True Self–Test
  • Standard 16–Pin Plastic DIP package
  • Senses Perpendicular to the Printed Circuit Board
  • Integral Signal Conditioning and 4–Pole Filter
  • Linear Output
  • Robust, High Shock Survivability SIMPLIFIED BLOCK DIAGRAM g G–CELL

4 SELF–TEST

A LOW–PASS FILTER

6 BYPASS

5 OUTPUT

7 GND

/C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA PIN NUMBER (DIP) /C0077/C0077/C0065/C0083/C0052/C0048/C0071/C0049/C0048/C0068 DIP PACKAGE CASE 648C–03 MICROMACHINED ACCELEROMETER ± 40g

4 Self–Test 12 N/C (1)

5 Output 13 N/C (1)

6 Bypass (2) 14 N/C (1)

7 GND 15 N/C (1)

NOTES: 1. Internal connections. All N/C should be tied to gnd, except pin 11 which must be tied to pin 8. 2. Bypass to ground with 0.1 µF ceramic capacitor for specified system perfor- mance. 1 2 3 4 5 6 7 8 910111213141516  Motorola, Inc. 1997 REV 1

/C0077/C0077/C0065/C0083/C0052/C0048/C0071/C0049/C0048/C0068

2 Motorola Sensor Device Data

Acceleration (biased each axis) G ± 500 g Acceleration (unbiased each axis) G ± 2000 g Supply Voltage VSmax –0.3 to +7.0 Vdc Storage Temperature Tstg –40 to +105 °C Operating Temperature(6) TA –40 to +85 °C OPERATING CHARACTERISTICS (VS = 5.0 Vdc, TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Acceleration Range G ±40 ±55 — g Output Drive Capability — –0.2 — 0.2 mA Supply Voltage VS 4.75 5.0 5.25 V Supply Current IO — 5.0 7.0 mA Full Scale Output Range VFSO 0.3 — VS – 0.3 V Sensitivity (over temperature range) (2) (3) ΔV/ΔG 36 40 44 mV/g Zero Acceleration Output (over temperature range) (3) (4) Voff 2.2 2.5 2.8 V Linearity — — 0.5 2.0 %FSO Transverse Sensitivity — — 1.0 3.0 %FSO Frequency Bandwidth — 300 400 500 Hz Noise — — 15 25 mV pk Self–Test Output Equivalent (5) G S 20 25 30 g Self–Test Input Low VSTL — — 1.6 V Self–Test Input High VSTH 3.4 — — V Self–Test Input Current — 10 70 200 µA NOTES: 1. The output voltage increases from the Zero Acceleration Output for positive acceleration and decreases for negative acceleration. The input will result in a 1.7 V output. 2. Sensitivity is a ratiometric parameter: ΔV/ΔG (Vs) = ΔV/ΔG (5 V) x (VS /5 V). 3. The compensated temperature operating range is –40 to +85°C. 4. Zero Acceleration Output is a ratiometric parameter: Voff(Vs) = Voff(5 V) x (VS /5 V). 5. Equivalent output in response to a Logic Level One on the self–test pin. 6. Additional temperature range available. Consult factory.

ORDERING INFORMATION

Device Temperature Range Case No. Package MMAS40G10D –40 to +85°C Case 648C–03 Plastic DIP

/C0077/C0077/C0065/C0083/C0052/C0048/C0071/C0049/C0048/C0068 3Motorola Sensor Device Data POSITIVE ACCELERATION SENSING DIRECTION 16 9 DIP PACKAGE * When positioned as shown, gravity will result in a positive 1g output Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.

/C0077/C0077/C0065/C0083/C0052/C0048/C0071/C0049/C0048/C0068

4 Motorola Sensor Device Data

CASE 648C–03 ISSUE C DIP PACKAGE –A– –B– 16 9 F D G E N K C NOTE 5 16 PL SAM0.13 (0.005) T –T– SEATING PLANE SBM0.13 (0.005) T J 16 PL M L DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.740 0.840 18.80 21.34 B 0.240 0.260 6.10 6.60 C 0.145 0.185 3.69 4.69 D 0.015 0.021 0.38 0.53 E 0.050 BSC 1.27 BSC F 0.040 0.70 1.02 1.78 G 0.100 BSC 2.54 BSC J 0.008 0.015 0.20 0.38 K 0.115 0.135 2.92 3.43 L 0.300 BSC 7.62 BSC M 0 10 0 10 N 0.015 0.040 0.39 1.01 /C0095/C0095/C0095/C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. INTERNAL LEAD CONNECTION BETWEEN 4 AND 5, 12 AND 13. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315 – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET : http://motorola.com/sps MMAS40G10D/D◊