MMA25312BT1 FREESCALE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Features

  • Frequency: 2300- -2700 MHz
  • P1dB: 31 dBm @ 2500 MHz
  • Power Gain: 26 dB @ 2500 MHz
  • OIP3: 40 dBm @ 2500 MHz
  • Active Bias Control (On- -chip)
  • Single 3 to 5 Volt Supply
  • Single- -ended Power Detector
  • Cost- -effective QFN Surface Mount Package
  • In Tape and Reel. T1 Suffix = 1,000 Units, 12 mm Tape Width, 7 inch Reel. 2300- -2700 MHz, 26 dB 31 dBm InGaP HBT MMA25312BT1 CASE 2131- -01 QFN 3×3 PLASTIC

Table 1. Typical CW Performance(1)

  1. VCC1 =V CC2 =V BIAS =5V d c ,TA =2 5°C, 50 ohm system, CW

Table 2. Maximum Ratings

  1. For reliable operation, the junction temperature should not

Table 3. Thermal Characteristics Select Documentation/Application Notes - - AN1955. © Freescale Semiconductor, Inc., 2012.All rights reserved.

Freescale Semiconductor, Inc. Table 4. Electrical Characteristics(VCC1 =V CC2 =V BIAS = 5 Vdc, 2500 MHz, TA =2 5°C, 50 ohm system, in Freescale CW Application Table 5. ESD Protection Characteristics Table 6. Moisture Sensitivity Level

  1. For reliable operation, the junction temperature should not exceed 150°C.

Figure 1. Functional Block Diagram Figure 2. Pin Connections

Freescale Semiconductor, Inc. Figure 3. MMA25312BT1 Test Circuit Schematic — 2500 MHz, 5 Volt Operation Table 7. MMA25312BT1 Test Circuit Component Designations and Values — 2500 MHz, 5 Volt Operation Note: Component numbers C3, C4, C6, C10, C12, C15 and R3 are labeled on board but not placed. Note: Component L1 intentionally omitted.

Freescale Semiconductor, Inc. Figure 4. MMA25312BT1 Test Circuit Component Layout — 2500 MHz, 5 Volt Operation (1) VBIAS [Board] supplies VBA1,V BA2 and VBIAS [Device]. Note: Component L1 intentionally omitted.

Freescale Semiconductor, Inc. Figure 5. MMA25312BT1 Test Circuit Schematic — 2500 MHz, 3.3 Volt Operation Table 8. MMA25312BT1 Test Circuit Component Designations and Values — 2500 MHz, 3.3 Volt Operation Note: Component numbers C3, C4, C6, C10, C12, C15 and R3 are labeled on board but not placed. Note: Component L1 intentionally omitted.

Freescale Semiconductor, Inc. Figure 6. MMA25312BT1 Test Circuit Component Layout— 2500 MHz, 3.3 Volt Operation (1) VBIAS [Board] supplies VBA1,V BA2 and VBIAS [Device]. Note: Component L1 intentionally omitted.

Freescale Semiconductor, Inc. MMA25312BT1 PACKAGE DIMENSIONS

Freescale Semiconductor, Inc.

Freescale Semiconductor, Inc. MMA25312BT1

Freescale Semiconductor, Inc. PRODUCT DOCUMENTATION, SOFTWARE AND TOOLS Refer to the following documents, software and tools to aid your design process. Application Notes

  • AN1955: Thermal Measurement Methodology of RF Power Amplifiers
  • AN3100: General Purpose Amplifier and MMIC Biasing Software
  • .s2p File Development Tools
  • Printed Circuit Boards For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the Software & Tools tab on the part’s Product Summary page to download the respective tool.

REVISION HISTORY

The following table summarizes revisions to this document. Revision Date Description 0 Sept. 2012 • Initial Release of Data Sheet

Freescale Semiconductor, Inc. MMA25312BT1 How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support Document Number: MMA25312B Rev. 0, 9/2012 Information in this document is provided solely to enablesystem and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particularpurpose, nor does Freescale assume any liability arisingout of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. Freescale, the Freescale logo, AltiVec, C- -5, CodeTest, CodeWarrior, ColdFire, C- -Ware, Energy Efficient Solutions logo, Kinetis, mobileGT, PowerQUICC, Processor Expert, QorIQ, Qorivva, StarCore, Symphony, and VortiQa are trademarks of ColdFire+, CoreNet, Flexis, MagniV, MXC, Platform in a Package, QorIQ Qonverge, QUICC Engine, Ready Play, SafeAssure, SMARTMOS, TurboLink, Vybrid, and Xtrinsic are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. E 2012 Freescale Semiconductor, Inc.