DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

 Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements withou t prior notification.  The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications. MITSUMI 2 to 4cell Li-ion/Li-polymer battery Secondary protection IC 2 to 4cell Li-ion/Li-polymer battery Secondary protection IC MM3508A Series Outline MM3508A series is a double protection IC for 1 to 4 serial cells lithium-ion / lithium-polymer rechargable battery for secondary protection IC. It detects battery voltage for each cell. The FUSE cutting signal is the output between period of time. And the CELL voltage is released by electric discharge after FUSE was cut. Features (Unless otherwise specifi ed, Topr=+25°C) 1. Range and accuracy of overcharge detection/hysteresis voltage Overcharge detection voltage 4.0V to 4.5V, 5mV step Accuracy±20mV (Topr=0 to +50°C) Overcharge hysteresis voltage -500mV to -50mV, 50mV step Accuracy±20% 2. Range of detection delay time Overcharge detection delay time 1ms to (1ms×2 )+(1ms×2 n1 and n2 can select two arbitrary integers between 0 to 13. (However n1 n2) 3. Low current consumption 4. Absolute maximum ratings VDD pin VSS -0.3 to VSS+28V OV pin VSS -0.3V to VDD+0.3V Storage temperature -55°C to +125°C Operation temperature -40°C to +110°C 5. The FUSE cutting signal is the output between period of time. And the CELL voltage is released by electric discharge resistance of "60K " after FUSE was cut. And CELL stops an electric discharge if the CELL voltage becomes less than the electric discharge release voltage. Top view Pin No. FunctionSOT-26A 6 5 VSSV1 OV VDDV2 V3

1 The input terminal of the positive voltage of V2 cell and the negative voltage of V3 cell

2 The input terminal of the positive voltage of V3 cell and the negative voltage of V4 cell

3 The input terminal of the power supply of IC and the positive voltage of V4 cell

4 Output of over charge detection (Output type is CMOS)

5 The input terminal of the ground of IC and the negative voltage of V1 cell

6 The input terminal of the positive voltage of V1 cell and the negative voltage of V2 cell

Top view Pin No. FunctionSSON-6A 564 13 2 VSSOV V1 V2VDD V3

1 The input terminal of the power supply of IC and the positive voltage of V4 cell

3 The input terminal of the positive voltage of V2 cell and the negative voltage of V3 cell

4 The input terminal of the positive voltage of V1 cell and the negative voltage of V2 cell

6 Output of over charge detection (Output type is CMOS)

 Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements withou t prior notification.  The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications. MITSUMI 2 to 4cell Li-ion/Li-polymer battery Secondary protection IC 2 to 4cell Li-ion/Li-polymer battery Secondary protection IC MM3508B Series Outline MM3508B series is a double protection IC for 1 to 4 serial cells lithium-ion / lithium-polymer rechargable secondary battery.It detects battery voltage for each cell. Each of these IC composed of four voltage detectors, reference voltage sources, oscillator, counter circuit and logical circuits. Features (Unless otherwise specifi ed, Topr=+25°C) 1. Range and accuracy of overcharge detection/hysteresis voltage Overcharge detection voltage 4.0V to 4.5V, 5mV step Accuracy±20mV (Topr=0 to +50°C) Overcharge hysteresis voltage -500mV to -50mV, 50mV step Accuracy±20% 2. Range of detection delay time Overcharge detection delay time 1ms to (1ms×2 )+(1ms×2 n1 and n2 can select two arbitrary integers between 0 to 13. (However n1 n2) 3. Low current consumption 4. Absolute maximum ratings VDD pin VSS -0.3 to VSS+28V OV pin VSS -0.3V to VDD+0.3V Storage temperature -55°C to +125°C Operation temperature -40°C to +110°C Top view Pin No. FunctionSOT-26A 6 5 VSSV1 OV VDDV2 V3 Top view Pin No. FunctionSSON-6A 564 13 2 VSSOV V1 V2VDD V3

 Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements withou t prior notification.  The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications. MITSUMI 1 to 3cell Li-ion/Li-polymer battery Secondary protection IC 2 to 3cell Li-ion/Li-polymer battery Secondary protection IC MM3508C Series Outline MM3508C series is a double protection IC for 2-4 cell Li batteries. It detects battery voltage for each cell. The terminal CT is used to control the output voltage of the terminal OV. Features (Unless otherwise specifi ed, Topr=+25°C) 1. Range and accuracy of overcharge detection/hysteresis voltage Overcharge detection voltage 4.0V to 4.5V, 5mV step Accuracy±20mV (Topr=0 to +50°C) Overcharge hysteresis voltage -500mV to -50mV, 50mV step Accuracy±20% 2. Range of detection delay time Overcharge detection delay time 1ms to (1ms×2 )+(1ms×2 n1 and n2 can select two arbitrary integers between 0 to 13. (However n1 n2) 3. Low current consumption 4. Absolute maximum ratings VDD pin VSS -0.3 to VSS+28V OV pin VSS -0.3V to VDD+0.3V Storage temperature -55°C to +125°C Operation temperature -40°C to +110°C 5. The terminal CT is used to control the output voltage of the terminal OV. Top view Pin No. FunctionSOT-26A 6 5 VSSCT OV VDDV1 V2

1 The input terminal of the positive voltage of V1 cell and the negative voltage of V2 cell

2 The input terminal of the positive voltage of V2 cell and the negative voltage of V3 cell

6 The input terminal of OV output control signal

Top view Pin No. FunctionSSON-6A 564 13 2 VSSOV CT V1VDD V2

3 The input terminal of the positive voltage of V1 cell and the negative voltage of V2 cell

4 The input terminal of OV output control signal

 Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements withou t prior notification.  The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications. MITSUMI 2 to 4cell Li-ion/Li-polymer battery Secondary protection IC Selection Guide (3000pcs/Reel) Please inquire to us, if you request a rank other than the above. Product name Package Function Overcharge detection voltage [V] Overcharge hysteresis voltage[mV] Overcharge detection dead time [s] Output type Latch function Stand by function PTC function VCELLUV HYS TOV MM3508A01RRE SSON-6A 1 to 4 cells 4.220±0.02 500±100 4.10±0.9 CMOS Output Active High MM3508A02RRE SSON-6A 1 to 4 cells 4.350±0.02 500±100 4.10±0.9 - MM3508A03RRE SSON-6A 1 to 4 cells 4.450±0.02 500±100 4.10±0.9 - MM3508A04RRE SSON-6A 1 to 4 cells 4.320±0.02 500±100 4.10±0.9 - MM3508A05RRE SSON-6A 1 to 4 cells 4.370±0.02 500±100 4.10±0.9 - MM3508A06RRE SSON-6A 1 to 4 cells 4.500±0.02 500±100 4.10±0.9 - MM3508A07RRE SSON-6A 1 to 4 cells 4.375±0.02 500±100 4.10±0.9 - MM3508B01RRE SSON-6A 1 to 4 cells 4.450±0.02 500±100 5.00±1.5 - - MM3508B06RRE SSON-6A 1 to 4 cells 4.350±0.02 V4 : 620±100 V3 to V1 : 270±100 4.00±1.2 - - MM3508B07RRE SSON-6A 1 to 4 cells 4.300±0.02 V4 : 620±100 V3 to V1 : 270±100 4.00±1.2 - - MM3508B08RRE SSON-6A 1 to 4 cells 4.450±0.02 V4 : 620±100 V3 to V1 : 270±100 4.00±1.2 - - MM3508B09RRE SSON-6A 1 to 4 cells 4.500±0.02 V4 : 620±100 V3 to V1 : 270±100 4.00±1.2 - - MM3508C01RRE SSON-6A 1 to 3 cells 4.350±0.02 390±160 4.00±1.2 -- MM3508C01NRH SOT-26A 1 to 3 cells 4.350±0.02 390±160 4.00±1.2 -- MM3508C02RRE SSON-6A 1 to 3 cells 4.350±0.02 390±160 5.65±1.7 -- MM3508C02NRH SOT-26A 1 to 3 cells 4.350±0.02 390±160 5.65±1.7 -- MM3508C03RRE SSON-6A 1 to 3 cells 4.450±0.02 390±160 5.65±1.7 -- MM3508C03NRH SOT-26A 1 to 3 cells 4.450±0.02 390±160 5.65±1.7 -- MM3508C04RRE SSON-6A 1 to 3 cells 4.450±0.02 390±160 4.00±1.7 --

 Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements withou t prior notification.  The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications. MITSUMI 2 to 4cell Li-ion/Li-polymer battery Secondary protection IC Application Circuit VDD SC Protector 330 VSS 0.1µF 0.1µF 0.1µF 0.1µF (1) When using it for 4 cells VDD SC Protector 330 VSS 0.1µF 0.1µF 0.1µF (2) When using it for 3 cells VDD SC Protector 330 VSS 0.1µF 0.1µF 0.1µF VDD SC Protector 330 VSS 0.1µF 0.1µF (3) When using it for 2 cells VDD SC Protector 330 VSS 0.1µF 0.1µF 3508A/3508B The voltage change becomes big according to an excessive current, and the current of the bias in IC is turned off temporarily. It is this infl uence, and there is a possibility that the output logic becomes unstable. In that case, please set the time constant of CR connected with the power supply terminal so that the variation in power source may become 1V/100µsec or more. The constant of the mark is a standard.

 Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements withou t prior notification.  The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications. MITSUMI 2 to 4cell Li-ion/Li-polymer battery Secondary protection IC When connecting a battery, it is recommended to make a short circuit by connecting a jumper between the output and VSS and then remove the output jumper at the completion of installing all the cells. The constant of the mark is a standard. 3508C VDD SC Protector CTExternal input 330 VSS 0.1µF 0.1µF 0.1µF (1) When using it for 3 cells VDD SC Protector CT 330 VSS 0.1µF 0.1µF 0.1µF PTC (2) When using it by the overheat protection by PTC