MM1501 MITSUMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Features

(1) Low power consumption achieved. (2) Low power supply voltage realized. (3) Frequency bandwidth without 75 Ω driver: 10MHz with 75 Ω driver: 7MHz (4) Cross talk 70dB When 4.43MHz (5) With SAG measures pin (75Ω driver and Y/C mix driver)

Applications

(1) TV (2) VTR (3) Video camera (4) Digital still camera (5) Other visual equipment Line-up Functions Model Name Input Output Clamp 6dB amp 75 Ω driver SAG measures pin Power supply voltage MM1501 4.5~13.0V MM1502 4.5~13.0V MM1503 4.5~13.0V Switch MM1504 21 4.5~13.0V MM1505 4.5~13.0V MM1506 4.5~13.0V MM1507 4.5~13.0V MM1508 4.5~13.0V Driver MM1509 11 4.5~13.0V MM1510 4.5~13.0V Y/C mix MM1511 11 / 4.5~13.0V MM1512 / 4.5~13.0V Package SOT-26A (with 75Ω driver) SOT-26B (without 75Ω driver)

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 Block Diagram MM1501 MM1502 MM1503 MM1504 MM1505 MM1506

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 MM1507 MM1508 MM1509 MM1510 MM1511 MM1512

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 Absolute Maximum Ratings (Ta=25°C) Item Symbol Rating Unit Storage temperature TSTG -40~+125 °C Operating temperature TOPR -30~+75 °C Power supply voltage VCC 15 V Allowable loss When alone Pd 200 mW When mounted on board Pd 350 ( *)m W Recommended Operating Conditions Item Symbol Rating Unit Power supply voltage VCC 4.5~13 V Electrical Characteristics (Except where noted otherwise, Ta=25°C, VCC=5V) Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC Refer to measurement procedures 3.7 4.8 mA Input pin voltage VIN No-signal, no-load 2.70 2.90 3.10 V Output pin voltage VOUT No-signal, no-load 2.15 V Voltage gain GV Refer to measurement procedures -0.5 0 +0.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain V CC=9V DG Refer to measurement procedures -30+ 3% Differential phase V CC=9V DP Refer to measurement procedures -3 0 +3 deg Total harmonic distortion ratio THD Refer to measurement procedures 0.03 0.3 % Output dynamic range VD Refer to measurement procedures 3.5 3.8 V Output offset voltage VOFF Refer to measurement procedures ±15 mV Cross talk CT Refer to measurement procedures -70 -60 dB SW input voltage H VIH Refer to measurement procedures 2.1 V SW input voltage L VIL Refer to measurement procedures 0.7 V Input impedance Zi 15 k Ω Output impedance Zo 75 Ω *Board size 100mm 100mm t=1.6 MM1501 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC Refer to measurement procedures 4.7 6.1 mA Input pin voltage VIN No-signal, no-load 1.70 1.90 2.10 V Output pin voltage VOUT No-signal, no-load 2.10 V Voltage gain GV Refer to measurement procedures 5.5 6.0 6.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain V CC=9V DG Refer to measurement procedures -30+ 3% Differential phase V CC=9V DP Refer to measurement procedures -3 0 +3 deg Total harmonic distortion ratio THD Refer to measurement procedures 0.03 0.3 % Output dynamic range VD Refer to measurement procedures 3.5 3.8 V Output offset voltage VOFF Refer to measurement procedures ±30 mV Cross talk CT Refer to measurement procedures -70 -60 dB SW input voltage H VIH Refer to measurement procedures 2.1 V Sw input voltage L VIL Refer to measurement procedures 0.7 V Input impedance Zi 15 k Ω Output impedance Zo 12 Ω MM1502

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC Refer to measurement procedures 3.3 4.3 mA Input pin voltage VIN No-signal, no-load 1.80 2.00 2.20 V Output pin voltage VOUT No-signal, no-load 1.25 V Voltage gain GV Refer to measurement procedures -0.5 0 +0.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain DG Refer to measurement procedures -30+ 3% Differential phase DP Refer to measurement procedures -3 0 +3 deg Total harmonic distortion ratio THD Refer to measurement procedures 0.03 0.3 % Output dynamic range VD Refer to measurement procedures 2.6 2.9 V Output offset voltage VOFF Refer to measurement procedures ±15 mV Cross talk CT Refer to measurement procedures -70 -60 dB SW input voltage H VIH Refer to measurement procedures 2.1 V SW input voltage L VIL Refer to measurement procedures 0.7 V Input impedance Zo 75 Ω MM1503 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC Refer to measurement procedures 4.4 5.7 mA Input pin voltage VIN No-signal, no-load 1.20 1.40 1.60 V Output pin voltage VOUT No-signal, no-load 1.25 V Voltage gain GV Refer to measurement procedures 5.5 6.0 6.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain DG Refer to measurement procedures -30+ 3% Differential phase DP Refer to measurement procedures -3 0 +3 deg Total harmonic distortion ratio THD Refer to measurement procedures 0.03 0.3 % Output dynamic range VD Refer to measurement procedures 2.6 2.9 V Output offset voltage VOFF Refer to measurement procedures ±30 mV Cross talk CT Refer to measurement procedures -70 -60 dB SW input voltage H VIH Refer to measurement procedures 2.1 V SW input voltage L VIL Refer to measurement procedures 0.7 V Input impedance Zo 12 Ω MM1504 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC Refer to measurement procedures 6.5 8.5 mA Input pin voltage VIN No-signal, no-load 2.35 2.55 2.75 V Output pin voltage VOUT No-signal, no-load 2.55 V Voltage gain GV Refer to measurement procedures -0.5 0.0 0.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain V CC=9V DG Refer to measurement procedures -30+ 3% Differential phase V CC=9V DP Refer to measurement procedures -3 0 +3 deg Output dynamic range VD Refer to measurement procedures 2.6 3.0 V Output offset voltage VOFF Refer to measurement procedures ±15 mV Cross talk CT Refer to measurement procedures -70 -60 dB SW input voltage H VIH Refer to measurement procedures 2.1 V SW input voltage L VIL Refer to measurement procedures 0.7 V Input impedance Zi 15 k Ω MM1505

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC Refer to measurement procedures 6.8 8.8 mA Input pin voltage VIN No-signal, no-load 1.75 1.95 2.15 V Output pin voltage VOUT No-signal, no-load 2.35 V Voltage gain GV Refer to measurement procedures 5.5 6.0 6.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain V CC=9V DG Refer to measurement procedures -30+ 3% Differential phase V CC=9V DP Refer to measurement procedures -3 0 +3 deg Output dynamic range VD Refer to measurement procedures 3.0 3.3 V Output offset voltage VOFF Refer to measurement procedures ±30 mV Cross talk CT Refer to measurement procedures -70 -60 dB SW input voltage H VIH Refer to measurement procedures 2.1 V SW input voltage L VIL Refer to measurement procedures 0.7 V Input impedance Zi 15 k Ω MM1506 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC Refer to measurement procedures 6.4 8.3 mA Input pin voltage VIN No-signal, no-load 1.15 1.35 1.55 V Output pin voltage VOUT No-signal, no-load 1.35 V Voltage gain GV Refer to measurement procedures -0.5 0 +0.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain DG Refer to measurement procedures -30+ 3% Differential phase DP Refer to measurement procedures -3 0 +3 deg Output dynamic range VD Refer to measurement procedures 2.6 2.9 V Output offset voltage VOFF Refer to measurement procedures ±15 mV Cross talk CT Refer to measurement procedures -70 -60 dB SW input voltage H VIH Refer to measurement procedures 2.1 V SW input voltage L VIL Refer to measurement procedures 0.7 V MM1507 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC Refer to measurement procedures 6.8 8.8 mA Input pin voltage VIN No-signal, no-load 1.15 1.35 1.55 V Output pin voltage VOUT No-signal, no-load 1.30 V Voltage gain GV Refer to measurement procedures 5.5 6.0 6.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain DG Refer to measurement procedures -30+ 3% Differential phase DP Refer to measurement procedures -3 0 +3 deg Output dynamic range VD Refer to measurement procedures 2.6 3.0 V Output offset voltage VOFF Refer to measurement procedures ±30 mV Cross talk CT Refer to measurement procedures -70 -60 dB SW input voltage H VIH Refer to measurement procedures 2.1 V SW input voltage L VIL Refer to measurement procedures 0.7 V MM1508

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC1 Refer to measurement procedures 6.4 8.3 mA Current consumption for PS ICC2 Refer to measurement procedures 20 30 µA PS input voltage L VPSL Refer to measurement procedures 0.3 V PS input voltage H VPSH Refer to measurement procedures 1.8 V Input pin voltage VIN No-signal, no-load 1.15 1.35 1.55 V Output pin voltage VOUT No-signal, no-load 1.15 V Voltage gain GV Refer to measurement procedures 5.5 6.0 6.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain DG Refer to measurement procedures -30+ 3% Differential phase DP Refer to measurement procedures -3 0 +3 deg Output dynamic range VD Refer to measurement procedures 2.6 3.0 V MM1510 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC1 Refer to measurement procedures 6.3 8.2 mA Current consumption for PS ICC2 Refer to measurement procedures 20 30 µA PS input voltage L VPSL Refer to measurement procedures 0.3 V PS input voltage H VPSH Refer to measurement procedures 1.8 V Input pin voltage VIN No-signal, no-load 1.75 1.95 2.15 V Output pin voltage VOUT No-signal, no-load 2.35 V Voltage gain GV Refer to measurement procedures 5.5 6.0 6.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain V CC=9V DG Refer to measurement procedures -30+ 3% Differential phase V CC=9V DP Refer to measurement procedures -3 0 +3 deg Output dynamic range VD Refer to measurement procedures 2.9 3.2 V Input impedance Zi 15 k Ω MM1509 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC Refer to measurement procedures 4.4 5.7 mA Y input pin voltage VYIN No-signal, no-load 2.00 2.20 2.40 V C input pin voltage VCIN No-signal, no-load 1.85 2.05 2.25 V Output pin voltage VOUT No-signal, no-load 1.15 V Voltage gain GV Refer to measurement procedures -0.5 0 6.5 dB Frequency characteristic fc Refer to measurement procedures -1 0 +0.5 dB Differential gain DG Refer to measurement procedures -30+ 3% Differential phase DP Refer to measurement procedures -3 0 +3 deg Y output dynamic range VDY Refer to measurement procedures 2.6 2.9 V C output dynamic range VDC Refer to measurement procedures 2.0 V C input impedance Zi 15 k Ω Output impedance Zo 25 Ω MM1511

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 Item Symbol Measurement conditions Min. Typ. Max. Unit Consumption current ICC Refer to measurement procedures 6.9 9.0 mA Y input pin voltage VYIN No-signal, no-load 1.95 2.15 2.35 V C input pin voltage VCIN No-signal, no-load 1.80 2.00 2.20 V Output pin voltage VOUT No-signal, no-load 1.10 V Voltage gain GV Refer to measurement procedures 5.5 6.0 6.5 dB Frequency characteristic fc Refer to measurement procedures -10+ 1 d B Differential gain DG Refer to measurement procedures -30+ 3% Differential phase DP Refer to measurement procedures -3 0 +3 deg Y output dynamic range VDY Refer to measurement procedures 2.6 2.9 V C output dynamic range VDC Refer to measurement procedures 2.0 V C input impedance Zi 15 k Ω MM1512 MM1501~MM1508

  • Switch Status Measurement Procedures Item Symbol Switch status S1 S2 S3 Consumption current ICC 222 Voltage gain GV 122 211 Frequency characteristic fc 122 211 Differential gain DG 122 211 Differential phase DP 122 211 Item Symbol Switch status S1 S2 S3 Total harmonic THD 122 distortion ratio 211 Output dynamic range VD 122 211 Output offset voltage VOFF 222 221 Cross talk CT 121 212 SW input voltage H VIH 221SW input voltage L VIL

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501

  • Measurement Procedures (MM1501 ~ MM1504) Consumption current ICC Connect a DC ammeter to VCC pin and measure. Hereafter, short the ammeter to use. Input a 2.0V P-P (1.0VP-P for MM1502 and MM1504), 100kHz sine wave to SG1. If TP1 voltage is V1 and TP3 voltage is V2, find Gv using the following formula: G V = 20LOG (V2/V1) dB Frequency characteristic fc In the above Gv measurement, if TP3 voltage at 10MHz is V3, find fc as follows: fc = 20LOG (V3/V2) dB Differential gain DG Input a 2.0VP-P (1.0VP-P for MM1502 and MM1504) staircase to SG1 and measure differential gain at TP3. APL = 10 ~ 90% Differential phase DP The same as for DG, but measure differential phase. Total harmonic distortion ratio THD Input a 2.5VP-P (1.25VP-P for MM1502, MM1504), 1kHz sine wave to SG1, connect a distortion factor meter to TP3 and measure. Output dynamic range VD Input a 100kHz sine wave to SG1. Change the amplitude of the sine wave, and measure VD, the maximum amplitude under THD 1%, at TP3. Output offset voltage VOFF Measure the DC voltage difference of each switch status at TP2. SG1, and operate SW3. If TP3 voltage when there is an output signal on the OUT pin is V4, and when there is no signal TP3 voltage is V5, then find C T by the following formula: CT = 20LOG (V5/V4) dB Impress an optional DC voltage on TP5 and TP6. Gradually increase from VC1 = 0V. When TP6 voltage is output on TP2, TP4 voltage is V IH. Gradually lower from VC1 = VCC, and when TP5 voltage is output on TP2, TP4 voltage is VIL. SW input voltage VI Cross talk CT Voltage gain GV

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501

  • Measurement Procedures (MM1505 ~ MM1508) Consumption current ICC Connect a DC ammeter to VCC pin and measure. Hereafter, short the ammeter to use. Voltage gain GV Input a 2.0VP-P(1.0VP-P for MM1506 and MM1508), 100kHz sine wave to SG1. If TP1 voltage is V1 and TP3 voltage is V2, find GV using the following formula: GV = 20LOG (V2/V1) dB Frequency characteristic fc In the above GV measurement, if TP3 voltage at 7MHz is V3, find fc as follows: fc = 20LOG (V3/V2) dB Differential gain DG Input a 2.0VP-P (1.0VP-P for MM1506 and MM1508) staircase to SG1 and measure differential gain at TP3. APL = 10 ~ 90% Differential phase DP The same as for DG, but measure differential phase. Output dynamic range VD Input a 100kHz sine wave to SG1. Change the amplitude of the sine wave, and measure VD, the maximum amplitude under THD 1%, at TP3. Output offset voltage VOFF Measure the DC voltage difference of each switch status at TP2. SG1, and operate SW3. IF TP3 voltage when there is an output signal on the OUT pin is V4, and when there is no signal TP3 voltage is V5, then find C T by the following formula: CT = 20LOG (V5/V4) dB Impress an optional DC voltage on TP6 and TP7. Gradually increase from VC1 = 0V. When TP7 voltage is output on TP2, TP5 voltage is V IH. Gradually lower from VC1 = VCC, and when TP6 voltage is output on TP2, TP5 voltage is VIL. SW input voltage VI Cross talk CT MM1509 ~ MM1510
  • Switch Status Item Symbol Switch status S1 S2 Consumption current ICC1 21 Consumption current for PS ICC2 23 PS input voltage L VIL 22PS input voltage H VIH Voltage gain GV 11 Item Symbol Switch status S1 S2 Frequency characteristic fc 1 1 Differential gain DG 1 1 Differential phase DP 1 1 Output dynamic range VD 11
  • Measurement Procedures Consumption current ICC1 Connect a DC ammeter to the VCC pin and measure. Consumption current for PS ICC2 Connect a DC ammeter to the VCC pin and measure. Connect a DC ammeter to the VCC pin. Gradually lower from VC1 = VCC. VC1 voltage when consumption current is reduced from ICC1 to 110% of ICC2 is VIL. Gradually raise from VC1 = 0V. VC1 voltage when consumption current increases from ICC2 to 90% of ICC1 is VIH. From here on, short the ammeter when using it. Voltage gain GV Input a 1.0VP-P, 100kHz sine wave to SG1. If TP1 voltage is V1 and TP2 voltage is V2, find GV by the following formula: GV = 20LOG (V2/V1) dB Frequency characteristic fc In the above GV measurement, if TP2 voltage at 7MHz is V3, find fc by the following formula. fc = 20LOG (V3/V2) dB Differential gain DG Input a 1.0VP-P staircase to SG1 and measure differential gain at TP2. APL = 10 ~ 90% Differential phase DP The same as for DG, but measure differential phase. Output dynamic range VD Input a 100kHz sine wave to SG1. Measure DR, the maximum amplitude under THD 1%, at TP2. PS input voltage VI

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 MM1511 ~ MM1512

  • Switch Status Item Symbol Switch status S1 S2 Consumption current ICC 22 Voltage gain GV Frequency characteristic fc 12 Item Symbol Switch status S1 S2 Differential gain DG 3 1 Differential phase DP 3 1 Y output dynamic range VDY 21 C output dynamic range VDC 31
  • Measurement Procedures Consumption current ICC1 Connect a DC ammeter to the VCC pin and measure. Hereafter, short the ammeter to use. Voltage gain GV Input a 2.0VP-P (1.0VP-P for MM1512), 100kHz sine wave to SG1. If TP1 voltage is V1 and TP2 voltage is V2, find GV by the following formula: GV = 20LOG (V2/V1) dB Frequency characteristic fc In the above GV measurement, if TP2 voltage at 10MHz (7MHz for MM1512) is V3, find fc by the following formula. fc = 20LOG (V3/V2) dB Differential gain DG Input a 2.0VP-P (1.0VP-P for MM1512) to SG1, input a chroma signal to SG2, and measure differential gain at TP2. APL = 10 ~ 90% Differential phase DP The same as for DG, but measure differential phase. Y output dynamic range VDY Input a 100kHz sine wave to SG1. Measure VDY, the maximum amplitude under THD 1%, at TP2. Input an APL 50% luminance signal to SG1 and input a chroma signal to SG2. Change the chroma signal amplitude and measure V DC, the maximum amplitude where there is no waveform distortion at TP2. C output dynamic range VDC

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 Measuring Circuit MM1501 MM1502 MM1503 MM1504

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 MM1505 MM1506 MM1507 MM1508

MITSUMI Video Switch · 75Ω driver · Y/C mix MM1501 MM1509 MM1510 MM1511 MM1512