MM126036

MXHQ87WJ3000 MURATA1 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 38

Technical content

Datasheet sections

Microwave Coaxial Connectors O30E.pdf Nov.1,2018

• All the products in this catalog comply with EU RoHS.
• EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment."
• For more details, please refer to our web page, "Murata's Approach for EU RoHS" (https://www.murata.com/en-eu/support/ compliance/rohs). O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

(Part Number) Microwave Coaxial Connectors/Multi Connectors 3Individual Specification Code (1) Code Switch Connector SMD Type Connector SMD Type Individual Specification Code (1) -26 -27 1Product ID MM Microwave Coaxial Connectors/Multi Connectors (Chip Type Receptacle) Code 2Series 5829 5831 6829 6831 7829 7831 8430 8130 8030 8930 8830 JSC-Male Type JSC-Female Type KSC-Male Type KSC-Female Type LSC-Male Type LSC-Female Type SWD Type SWF Type SWG Type SWH Type SWJ Type Code Series 5Package Product ID B R Bulk Reel Code Package Product ID K15 K20 SWD Type, 1000pcs./Reel (ø180mm) SWF Type, 2000pcs./Reel (ø180mm) SWD Type, 3000pcs./Reel (ø330mm) SWF Type, 8000pcs./Reel (ø330mm) SWG Type, 3000pcs./Reel (ø180mm) SWH, SWJ, JSC-Male, JSC-Female Type, 4000pcs./Reel (ø180mm) KSC-Male, KSC-Female, LSC-Male, LSC-Female, 5000pcs./Reel (ø180mm) SWG, SWH, JSC-Male, JSC-Male Type, 10000pcs./Reel (ø330mm) SWJ, JSC-Female Type, 15000pcs./Reel (ø330mm) KSC-Male, KSC-Female, LSC-Male, LSC-Female, 20000pcs/Reel (ø330mm) Code Package Detail 4Individual Specification Code (2) Code Serial Individual Specification Code (2) 6Package Detail R MM -26 8930 *You cannot order with Bulk for MP items. O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

(Part Number) Microwave Coaxial Connectors with Cable 3Cable Code 0.4D, PFA, Single Shield Line, Spiral 0.2D, PFA, Single Shield Line, Spiral 0.3D, PFA, Single Shield Line, Spiral Cable 1Product ID MX Microwave Coaxial Connectors with Cable Code 2Connector (1) JA JG JF KG KF LA LF JSC Type for 01 Cable JSC Type for B3 Cable JSC Type for 56 Cable KSC Type for B3 Cable KSC Type for 56 Cable LSC Type for B3 Cable LSC Type for 56 Cable Code Connector (1) 5Length ** Expressed by two sign Code Individual Specification Code 4Connector (2) Code JSC Type for 01 Cable JSC Type for B3 Cable JSC Type for 56 Cable KSC Type for B3 Cable KSC Type for 56 Cable LSC Type for B3 Cable LSC Type for 56 Cable None Connector Connector (2) JA JG JF KG KF LA LF XX 6Individual Specification Code MX JA Expressed by four figures. The unit is mm. From first to third figures are significant, and the fourth figure expresses the number of zeros which follow the three figures. 5000 1001 500mm=500x100 1000mm=100x101 Code LengthEx.) O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Murata offers a variety of connectors:  Switch connector to measure RF circuit.  Microwave coaxial cable connector to transmit high frequency signals between circuits with low loss.  Board to Board connector to transmit high frequency signals from board to board with low loss. Microwave Coaxial Connectors with Switch The RF circuit and ANT characteristics can be measured by mounting in an RF transmission line. The internally built-in mechanical switch separates the RF circuit and ANT circuit, so that the circuit can be measured without any mutual effect using a dedicated probe made by Murata. Except when measuring with probe, internal mechanical switch is connected, so RF circuit and Antenna circuit are connected. Microwave Coaxial Connectors with Switch (bi-direction) RF circuit and Antenna circuit can be measured by using special probe without remounting switch connector. RF circuit ANT Probe Signal in Signal in Signal out Signal out Probe RF circuit ANT Probe Signal in RF RF ANT. ANT.RF ANT. Signal in Signal out Signal out Probe Probe Signal out Signal in Signal out Probe Signal in Type of Connectors O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued on the following page.

Microwave Coaxial Connectors with Cable This connector transmits high frequency signals between circuits, and its transmission loss is lower than electrode pattern. SMD type coaxial Connector and coaxial cable connector are used in a kit. Microwave Coaxial Board to Board Connectors Board to Board connector to transmit high frequency signals from board to board, such as antenna and main board. MAIN ANT DIVERSITY ANT RF circuit RF circuit DIVERSITY ANT MAIN ANT Type of Connectors O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page.

Microwave Coaxial Connectors with Switch Microwave Coaxial Connectors with Switch SWD Type

Features

1. The microwave coaxial connector with switch is very useful for electrical characteristics measurement of microwave circuits for PC, tablet, and cellular phone. 2. Size 3x3x1.75mm (LxWxH), Occupation area 9mm 3. Excellent characteristics, IL 0.2dB max. (@6GHz), VSWR 1.3 max. (DC to 6GHz) 4. Connector durability is 500 cycles with probe.

Applications

PC, Tablet, Cellular phone, and Other wireless equipment

• I/O pattern should be designed to be the impedance match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
• The solder resist should be printed except for the land pattern on the PWB
• Land pattern and solder resist pattern must be followed to avoid soldering defects. Measurement system: Refer to Electrical performance measurement system (p. 33) Specification (Insertion Loss & VSWR) Standard Pattern Dimension, Stencil Mask Pattern 3±0.1 dia 2.1 1.75±0.15 0.8 3±0.1 IN OUT GROUND (in mm) 2±0.1 0.5±0.1 1±0.1 0.4±0.1 1±0.1 0.4±0.1 Inner terminal (C) Inner terminal (R) Signal in 0.1 Scale: Free Tolerances Unless Otherwise Specified: ±0.2 Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) Insertion Loss (On) (dB max.) Isolation (Off) (dB min.) MM8430-2610 50 300 500 500 to 6 1.2 (DC to 3GHz) 1.3 (3GHz to 6GHz) 0.1 (DC to 3GHz) 0.2 (3GHz to 6GHz) 20 (DC to 3GHz) 15 (3GHz to 6GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 0123456 2 1.4 0.6 0.2 1.6 1.8 1.2 0.8 0.4 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. 2.00 0.50 1.00 4.00 1.00 1.00 3.00 (1.50) 2.10 3.10 4.10 1.74 (1.50) (in mm) Through hole Land (Gold Plating) Electrode Standard Pattern Dimensions O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued on the following page.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM8430-2610RA1: 180 mm dia. reel/1000 pcs. MM8430-2610RB3: 330 mm dia. reel/3000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity The standard solder cream stencil mask drawing 0.53 1.00 2.00 3.50 2.00 3.60 3.00 (Thickness: 0.1mm) (in mm) N A D B C (in mm) Part Number A B C D N W1 W2 MM8430-2610RA1 MM8430-2610RB3 180+0/-3 330±2.0 13±0.5 13±0.5 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+2/-0 Dia. (110) 13+2/-0 13.4±2 17±2 17.4±2 (in mm) B W D0 E F K 3.4±0.1 A P1 P2 T 8±0.1 W F P1 A K 3° max.3° max. B E D0 TP2 Standard Stencil Mask Pattern O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page.

Microwave Coaxial Connectors with Switch Microwave Coaxial Connectors with Switch SWF Type

1. The microwave coaxial connector with switch is very useful for electrical characteristics measurement of microwave circuit for PC, tablet and cellular phone. 3. Excellent characteristics, low IL 0.2dB max. (@6GHz) 4. Connector durability is 100 cycles with probe.

PC, Tablet, Cellular phone and other wireless equipment

• I/O pattern should be designed to be the impedance match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
• The solder resist should be printed except for the land pattern on the PWB
• Land pattern and solder resist pattern must be followed to avoid soldering defects. Specification (Insertion Loss & VSWR) Standard Pattern Dimension, Stencil Mask Pattern 2.5 Dia. 2.1 1.4±0.1 0.8 2.5 (in mm) Dia. 0.6 Signal in 0.1 0.6±0.1 1.3±0.1 0.45±0.1 0.45±0.1 1.5±0.1 0.35±0.1 0.18±0.1 Inner terminal (R) Inner terminal (C) IN OUT GROUND Scale: Free Tolerances Unless Otherwise Specified: ±0.2 Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) Insertion Loss (On) (dB max.) Isolation (Off) (dB min.) MM8130-2600 70 300 500 100 to 6 1.2 (DC to 3GHz) 1.3 (3GHz to 6GHz) 0.1 (DC to 3GHz) 0.2 (3GHz to 6GHz) 20 (DC to 3GHz) 15 (3GHz to 6GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 0123456 2 1.4 0.6 0.2 1.6 1.8 1.2 0.8 0.4 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. 1.74 1.50 1.50 0.50 1.30 2.80 4.00 1.74 2.90 4.14 2.70 1.10 3.44 (in mm) Land (Gold Plating) Electrode Standard Pattern Dimensions Measurement system: Refer to Electrical performance measurement system (p. 33) O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued on the following page.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM8130-2600RA2: 180 mm dia. reel/2000 pcs. MM8130-2600RB8: 330 mm dia. reel/8000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity The standard solder cream stencil mask drawing (Thickness: 0.12mm) 1.10 2.70 0.28 2.14 2.70 1.30 2.48 (in mm) N A D B C (in mm) Part Number A B C D N W1 W2 MM8130-2600RA2 MM8130-2600RB8 180+0/-3 330±2.0 13±0.5 13±0.5 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EF K 2.8±0.1 A P1 P2 T 4±0.1 0.15±0.1 0.85±0.1 W F P1 A K B E D0 TP2 5° max.5° max. Standard Stencil Mask Pattern O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page.

Microwave Coaxial Connectors with Switch Microwave Coaxial Connectors with Switch SWG Type

1. The microwave coaxial connector with switch is very useful for electrical characteristics measurement of microwave circuit for PC, tablet and cellular phone. 2. Nominal Frequency Range is DC to 11GHz. 3. Size 2x2x0.9mm (LxWxH), Occupation area 4mm 4. Excellent characteristics, low IL 0.2dB max. (@6GHz) and 1.5 max. (6GHz to 11GHz) 5. Connector durability is 100 cycles with probe.

PC, Tablet, Cellular phone and other wireless equipment Specification (Insertion Loss & VSWR) 0.08 (in mm) Scale: Free Tolerances Unless Otherwise Specified: ±0.2 IN OUT GROUND 1.9 0.38 0.25 1.9 0.180.15 Innerterminal (C) Inner terminal (R) +0.2 -0.1 +0.2 -0.1 2.1 0.45 0.9±0.1 Signal in Dia. 0.5 Dia. 1.35 Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) Insertion Loss (On) (dB max.) Isolation (Off) (dB min.) MM8030-2610 70 300 500 100 to 11 1.2 (DC to 3GHz) 1.3 (3GHz to 6GHz) 1.5 (6GHz to 11GHz) 0.1 (DC to 3GHz) 0.2 (3GHz to 6GHz) 0.5 (6GHz to 11GHz) 20 (DC to 3GHz) 15 (3GHz to 6GHz) 10 (6GHz to 11GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 0123456789 1 0 1 1 2 1.4 0.6 0.2 1.6 1.8 1.2 0.8 0.4 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. Measurement system: Refer to Electrical performance measurement system (p. 33) O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM8030-2610RJ3: 180 mm dia. reel/3000 pcs. MM8030-2610RK0: 330 mm dia. reel/10000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity The standard solder cream stencil mask drawing 1.10 1.36 1.36 2.20 0.36 0.84 (Thickness: 0.08mm) 1.10 1.58 2.30 2.20 1.34 0.31 2.30 1.68 1.00 (Thickness: 0.12mm) 0.33 (Thickness: 0.10mm)0.82 2.20 1.18 1.00 1.64 2.30 (in mm) N A D B C (in mm) Part Number A B C D N W1 W2 MM8030-2610RJ3 MM8030-2610RK0 180+0/-3 330±2.0 13±0.5 13±0.5 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EF K 2.28±0.1 A P1 P2 T 4±0.1 0.15±0.1 0.85±0.1 W F P1 A K B E D0 TP2 5° max.5° max. Standard Stencil Mask Pattern  I/O pattern should be designed to be the impedance match 50 ohm.  The material of PWB is the epoxy resin of glass fabric  The solder resist should be printed except for the land pattern on the PWB  Land pattern and solder resist pattern must be followed to avoid soldering defects. Standard Pattern Dimension, Stencil Mask Pattern (in mm) 2.30 1.36 0.90 0.50 1.50 2.30 0.64 1.10 2.30 2.30 1.10 0.64 1.36 1.00 0.90 0.50 Land (Electrode + Gold Plating) Resist Area Electrode Standard Pattern Dimensions O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Microwave Coaxial Connectors with Switch Microwave Coaxial Connectors with Switch SWH Type

1. The microwave coaxial connector with switch is very useful for electrical characteristics measurement of microwave circuit for cellular phone and small wireless equipment such as wearable equipment. 3. Excellent characteristics, low IL 0.2dB max. (@6GHz) 4. Connector durability is 50 cycles with probe.

Cellular phone, Wearable equipment and other wireless equipment Specification (Insertion Loss & VSWR) (in mm) Scale: Free Tolerances Unless Otherwise Specified: ±0.2 IN OUT GROUND 0.11 1.6 1.7 1.6 Dia.0.46 Dia.1.1 0.7 0.3 0.55 0.2 0.8 Inner terminal (C) 0.38 0.18 Inner terminal (R) Signal in 0.12 0.08 Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) Insertion Loss (On) (dB max.) Isolation (Off) (dB min.) MM8930-2600 70 200 500 50 to 6 1.2 (DC to 3GHz) 1.3 (3GHz to 6GHz) 0.1 (DC to 3GHz) 0.2 (3GHz to 6GHz) 20 (DC to 3GHz) 15 (3GHz to 6GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 0123456 2 1.4 0.6 0.2 1.6 1.8 1.2 0.8 0.4 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. Measurement system: Refer to electrical performance measurement system (p. 33) O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM8930-2600RJ4: 180 mm dia. reel/4000 pcs. MM8930-2600RK0: 330 mm dia. reel/10000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity 0.25 1.60 1.10 1.80 1.70 1.30 0.45 0.23 1.60 1.10 1.80 1.55 0.55 1.36 The standard solder cream stencil mask drawing (Thickness: 0.08mm) (Thickness: 0.10mm) (in mm) N A D B C (in mm) Part Number A B C D N W1 W2 MM8930-2600RJ4 MM8930-2600RK0 180+0/-3 330±2.0 13±0.5 13±0.5 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EF K 1.73±0.1 A P1 P2 T 4±0.1 0.14±0.1 0.8±0.2 W F P1 A K B E D0 TP2 5° max.5° max. Standard Stencil Mask Pattern  I/O pattern should be designed to be the impedance match 50 ohm.  The material of PWB is the epoxy resin of glass fabric  The solder resist should be printed except for the land pattern on the PWB  Land pattern and solder resist pattern must be followed to avoid soldering defects. Standard Pattern Dimension, Stencil Mask Pattern (in mm) 1.30 1.80 0.45 1.70 0.45 0.70 0.80 3.20 0.35 4.20 1.10 1.03 Ground 0.30 Inner Terminal (C) Inner Terminal (R) 1.70 1.70 Non-resist area 0.45 Land (Gold Plating) Non-resist Area Electrode Standard Pattern Dimensions O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Microwave Coaxial Connectors with Switch Microwave Coaxial Connectors with Switch SWH-2Way Type

1. The microwave 2way (bi-directional) coaxial connector with switch is very useful for electrical characteristics measurement of microwave circuit for cellular phone and small wireless equipment such as wearable equipment. 2. It is possible to measure ANT circuit and RF circuit with designated probe. 4. Excellent characteristics, low IL 0.2dB max. (@6GHz) 5. Connector durability is 50 cycles with probe.

Cellular phone, Wearable equipment and other wireless equipment Specification (Insertion Loss & VSWR) Dia. 0.8 1.6 1.7 1.6 0.55 0.38 0.18 0.8 Dia. 1.2 0.3 0.7 0.12 0.12 Inner terminal (C) Inner terminal (R) 0.2 0.08 (in mm) Scale: Free Tolerances Unless Otherwise Specified: ±0.2 IN OUT GROUND Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) Insertion Loss (On) (dB max.) Isolation (Off) (dB min.) MM8930-2620 70 200 500 50 to 6 1.2 (DC to 3GHz) 1.3 (3GHz to 6GHz) 0.1 (DC to3GHz) 0.2 (3GHz to 6GHz) RF: 20 (DC to 3GHz) RF: 15 (3GHz to 6GHz) ANT: 18 (DC to 3GHz) ANT: 13 (3GHz to 6GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 0123456 2 1.4 0.6 0.2 1.6 1.8 1.2 0.8 0.4 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. Measurement system: Refer to electrical performance measurement system (p. 33) O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM8930-2620RJ4: 180 mm dia. reel/4000 pcs. MM8930-2620RK15: 330 mm dia. reel/15000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity 0.25 1.60 1.10 1.80 1.70 1.30 0.45 0.23 1.60 1.10 1.80 1.55 0.55 1.36 The standard solder cream stencil mask drawing (Thickness: 0.08mm) (Thickness: 0.10mm) (in mm) N A D B C (in mm) Part Number A B C D N W1 W2 MM8930-2620RJ4 MM8930-2620RK15 180+0/-3 330±2.0 13±0.5 13±0.5 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EF K 1.73±0.1 A P1 P2 T 4±0.1 0.14±0.1 0.8±0.2 W F P1 A K B E D0 TP2 5° max.5° max. Standard Stencil Mask Pattern  I/O pattern should be designed to be the impedance match 50 ohm.  The material of PWB is the epoxy resin of glass fabric  The solder resist should be printed except for the land pattern on the PWB  Land pattern and solder resist pattern must be followed to avoid soldering defects. Standard Pattern Dimension, Stencil Mask Pattern (in mm) 1.30 1.80 0.45 1.70 0.45 0.70 0.80 3.20 0.35 4.20 1.10 1.03 Ground 0.30 C Terminal (RF) R Terminal (Ant) 1.70 0.45 1.70 Non-resist area Land (Gold Plating) Non-resist Area Electrode Standard Pattern Dimensions O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Microwave Coaxial Connectors with Switch Microwave Coaxial Connectors with Switch SWJ Type

1. The worlds smallest level microwave coaxial connector with switch is very useful for electrical characteristics measurement of microwave circuit for cellular phone and small wireless equipment such as wearable equipment. 3. Excellent characteristics, low IL 0.2dB max. (@6GHz) 4. Connector durability is 50 cycles with probe.

Cellular phone, Wearable equipment and other wireless equipment

• I/O pattern should be designed to be the impedance match 50 ohm.
• The material of PWB is the epoxy resin of glass fabric
• The solder resist should be printed except for the land pattern on the PWB
• Land pattern and solder resist pattern must be followed to avoid soldering defects. Specification (Insertion Loss & VSWR) Standard Pattern Dimension, Stencil Mask Pattern Signal in 1.4 1.4 1.2 Dia. 0.9 0.27 0.65±0.1 Inner terminal (C) 0.41 0.23 0.48 0.59 0.23 Inner terminal (R) +0.2 0.08 Dia. 0.4 (in mm) Scale: Free Tolerances Unless Otherwise Specified: ±0.2 IN OUT GROUND Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) Insertion Loss (On) (dB max.) Isolation (Off) (dB min.) MM8830-2600 70 200 500 50 to 6 1.2 (DC to 3GHz) 1.3 (3GHz to 6GHz) 0.1 (DC to 3GHz) 0.2 (3GHz to 6GHz) 20 (DC to 3GHz) 15 (3GHz to 6GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 0123456 2 1.4 0.6 0.2 1.6 1.8 1.2 0.8 0.4 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. (in mm) 0.60 0.30 (1.26) (0.175) 1.98 0.68 0.48 3.39 2.99 1.78 C 0.063 3.20 0.70 0.28 0.35 0.64 0.96 (0.75) (1.50) 0.60 0.27 0.64 0.49 R 0.05 1.30 0.78 0.26 0.58 0.68 1.00 1.50 Inner Terminal (C) Inner Terminal (R) Land (Gold Plating) Resist Area Electrode Standard Pattern Dimensions Measurement system: Refer to electrical performance measurement system (p. 33) O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued on the following page.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM8830-2600RJ4: 180 mm dia. reel/4000 pcs. MM8830-2600RK15: 330 mm dia. reel/15000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity The standard solder cream stencil mask drawing (Thickness: 0.08mm) 1.30 0.58 0.25 0.70 R 0.05 1.00 1.50 (in mm) N A D B C (in mm) Part Number A B C D N W1 W2 MM8830-2600RJ4 MM8830-2600RK15 180+0/-3 330±2.0 13±0.5 13±0.5 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EFK 1.3±0.1 A P1 P2 T 4±0.1 0.14±0.1 0.29±0.1 W F P1 A K B E D0 TP2 5° max.5° max. Standard Stencil Mask Pattern O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page.

Microwave Coaxial Connectors Microwave Coaxial Connectors JSC Type

1. The microwave coaxial connector with cables is small, thin and suitable for internal wiring of cellular phone and small wireless equipment such as wearable equipment. 2. Nominal Frequency Range is DC to 12GHz. (01 type cable.) 3. Receptacle size 2x1.8 (LxW), Occupation area 3.6mm 4. Mating height is 1.0mm max., which is the worlds lowest profile level with cable and receptacle. 6. This has good lock feeling when cable and receptacle are mated.

Cellular phone, Wearable equipment and other wireless equipment Specification (Insertion Loss & VSWR) Scale: Free Tolerances Unless Otherwise Specified: ±0.2 1.8 1.16 0.7 0.4 0.4 Dia. 1.3 1.70.5 (in mm) Outer Terminal Inner Terminal 0.08 I/O terminal VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 02468 1 0 1 213579 1 1 10 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) MM5829-2700 35 200 500 30 to 12 1.3 (DC to 3GHz) 1.4 (3GHz to 6GHz) 1.5 (6GHz to 9GHz) 1.6 (9GHz to 12GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C Measurement system: Refer to electrical performance measurement system (p. 33) Cable part number of specification: MXJA01JA1000 Cable type of specification: 01 Cable length of specification: 100mm Measurement condition: Cable + Receptacle O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM5829-2700RJ4: 180 mm dia. reel/4000 pcs. MM5829-2700RK0: 330 mm dia. reel/10000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity The standard solder cream stencil mask drawing (Thickness: 0.10mm) 2.20 1.40 0.30 1.40 1.50 2.20 0.30I/O Terminal (in mm) N A D B C (in mm) Part Number A B C D N W1 W2 MM5829-2700RJ4 MM5829-2700RK0 180+0/-3 330±2.0 13±0.2 13±0.2 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EF K 2.0±0.1 A P1 P2 T 4±0.1 0.9±0.1 0.3±0.1 W F AK B E D0 TP2 3° max.3° max. Standard Stencil Mask Pattern  I/O pattern should be designed to be the impedance match 50 ohm.  The material of PWB is the epoxy resin of glass fabric  The solder resist should be printed except for the land pattern on the PWB  Land pattern and solder resist pattern must be followed to avoid soldering defects. Standard Pattern Dimension, Stencil Mask Pattern 2.20 1.40 1.00 0.40 1.00 0.30 1.70 1.40 2.40 (1.35) 0.40 (1.50) 1.74 (1.50) (1.86) (3.18) 1.00 I/O Terminal 0.40 1.70 1.30 2.40 0.90 2.20 0.50 2.85Min. I/O Terminal (in mm) Land (Gold Plating) Resist Area Electrode Standard Pattern Dimensions O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Microwave Coaxial Connectors Microwave Coaxial Connectors KSC Type

1. This worlds smallest level microwave coaxial connector with cables is thin and suitable for internal wiring of cellular phone and small wireless equipment such as wearable equipment. 2. Receptacle size 1.3x1.2 (LxW), Occupation area 1.56mm 3. Mating height is 0.8mm max., which is world lowest profile level, with cable and receptacle. 5. This has good lock feeling when cable and receptacle are mated.

Cellular phone, Wearable equipment and other wireless equipment Specification (Insertion Loss & VSWR) Scale: Free Tolerances Unless Otherwise Specified: ±0.2 (in mm) Outer Terminal Inner Terminal 0.84 1.2 1.2 1.3 Dia. 0.88 0.38 0.2 0.7 0.15min *1 : This electrode might be covered with resin. 0.08 VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 0123456 10 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) MM6829-2700 35 200 500 30 to 6 1.3 (DC to 3GHz) 1.4 (3GHz to 6GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C Measurement system: Refer to electrical performance measurement system (p. 33) Cable part number of specification: MXKGB3KG1000 Cable type of specification: B3 Cable length of specification: 100mm Measurement condition: Cable + Receptacle O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM6829-2700RJ5: 180 mm dia. reel/5000 pcs. MM6829-2700RK20: 330 mm dia. reel/20000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity The standard solder cream stencil mask drawing (Thickness: 0.08mm) 0.25 0.4 0.7 1.3 0.75 0.55 0.74 0.99 1.3 (in mm) N A D B C (in mm) Part Number A B C D N W1 W2 MM6829-2700RJ5 MM6829-2700RK20 180+0/-3 330±2.0 13±0.2 13±0.2 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EFK 1.35±0.1 A P1 P2 T 4±0.1 0.29±0.1 0.2±0.1 W F AK B E D0 TP2 3° max.3° max. Standard Stencil Mask Pattern  I/O pattern should be designed to be the impedance match 50 ohm.  The material of PWB is the epoxy resin of glass fabric  The solder resist should be printed except for the land pattern on the PWB  Land pattern and solder resist pattern must be followed to avoid soldering defects. Standard Pattern Dimension, Stencil Mask Pattern 1.251.25 0.7 0.3 0.7 0.3 1.3 0.7 1.3 0.5 0.75 0.75 1.3 0.5 1.3 0.3 (in mm) 0.4 Land (Gold Plating) Resist Area Electrode Standard Pattern Dimensions O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Microwave Coaxial Connectors Microwave Coaxial Connectors LSC Type

1. The microwave coaxial connector with cables is small, thin and suitable for internal wiring of cellular phone and small wireless equipment such as wearable equipment. 2. Receptacle size 1.7x1.6 (LxW), Occupation area 2.72mm 3. Mating height is 0.8mm max., which is world lowest profile level, with cable and receptacle. 4. Diameter of receptacle cylinder is equal size with JSC type connector. It makes easy to mate cable and connector. 6. This has good lock feeling when cable and receptacle are mated.

Cellular phone, Wearable equipment and other wireless equipment Specification (Insertion Loss & VSWR) Scale: Free Tolerances Unless Otherwise Specified: ±0.2 (in mm) Outer Terminal Inner Terminal *1 : This electrode might be covered with resin. Dia.1.3 1.6 0.9 0.39 1.6 1.7 0.2 0.7I/O terminal 0.08 VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 0123456 10 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) MM7829-2700 35 200 500 30 to 6 1.3 (DC to 3GHz) 1.4 (3GHz to 6GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C Measurement system: Refer to electrical performance measurement system (p. 33) Cable part number of specification: MXLF56LF1000 Cable type of specification: 56 Cable length of specification: 100mm Measurement condition: Cable + Receptacle O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM7829-2700RJ5: 180 mm dia. reel/5000 pcs. MM7829-2700RK20: 330 mm dia. reel/20000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity The standard solder cream stencil mask drawing (Thickness: 0.08mm) 1.70 1.24 1.00 0.70 1.10 1.70 0.95 0.75 0.25I/O Terminal (in mm) N A D B C (in mm) Part Number A B C D N W1 W2 MM7829-2700RJ5 MM7829-2700RK20 180+0/-3 330±2.0 13±0.2 13±0.2 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EFK 1.75±0.1 A P1 P2 T 4±0.1 0.29±0.1 0.2±0.05 W F AK B E D0 TP2 3° max.3° max. Standard Stencil Mask Pattern  I/O pattern should be designed to be the impedance match 50 ohm.  The material of PWB is the epoxy resin of glass fabric  The solder resist should be printed except for the land pattern on the PWB  Land pattern and solder resist pattern must be followed to avoid soldering defects. Standard Pattern Dimension, Stencil Mask Pattern 0.30 1.70 0.70 1.70 0.95 0.40 I/O Terminal 1.25 0.70 0.30 1.70 1.40 0.70 1.25 0.40 1.70 1.20 2.10 0.70 0.95 1.15 I/O Terminal (in mm) Land (Gold Plating) Resist Area Electrode Standard Pattern Dimensions O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Microwave Coaxial Board to Board Connectors Microwave Coaxial Board to Board Connectors JSC Type

1. The microwave coaxial Board to Board connector is small, thin and suitable for internal wiring of cellular phone and small wireless equipmant such as wearable equipment. 2. Receptacle size 2x1.8 (LxW), Occupation area 3.6mm Plug receptacle size 2x2.2 (LxW), Occupation area 4.4mm 3. Mating height is 0.8mm max., which is worlds lowest profile level, with plug receptacle and receptacle. 5. This has good lock feeling when plug receptacle and receptacle are mated. 6. This connector mate with MM5829-2700.

Cellular phone, Wearable equipment and other wireless equipment Specification (Insertion Loss & VSWR) (in mm) Scale: Free Tolerances Unless Otherwise Specified: ±0.2 I/O Terminal 0.4 0.4 2.2 0.6 1.4 2.0 (Dia. 1.65) 0.1 Outer Terminal Inner Terminal VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 0123456 2 1.4 0.6 0.2 1.6 1.8 1.2 0.8 0.4 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) MM5831-2700 35 200 500 30 to 6 1.3 (DC to 3GHz) 1.5 (3GHz to 6GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C Measurement system: Refer to electrical performance measurement system (p. 33) Measurement condition: SMD plug + Receptacle O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM5831-2700RJ4: 180 mm dia. reel/4000 pcs. MM5831-2700RK15: 330 mm dia. reel/15000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity The standard solder cream stencil mask drawing (Thickness: 0.1mm) (in mm) 0.75 2.20 0.80 I/O Pattern Ground Pattern 1.40 0.40 2.40 1.80 N A D B C (in mm) Part Number A B C D N W1 W2 MM5831-2700RJ4 MM5831-2700RK15 180+0/-3 330±2.0 13±0.2 13±0.2 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EFK 2.0±0.1 A P1 P2 T 4±0.1 0.6±0.1 0.1±0.1 W F AK B E D0 TP2 3° max.3° max. Standard Stencil Mask Pattern  I/O pattern should be designed to be the impedance match 50 ohm.  The material of PWB is the epoxy resin of glass fabric  The solder resist should be printed except for the land pattern on the PWB  Land pattern and Solder resist pattern must be followed to avoid soldering defects. Standard Pattern Dimension, Stencil Mask Pattern 0.10 0.40 1.50 1.76 1.50 1.60 1.80 1.86 0.85 0.800.70 0.65 0.30 2.40 1.101.10 I/O Pattern 0.40 0.50 1.50 2.20 0.750.65 0.50 1.60 2.40 I/O Pattern (in mm) Land (Gold Plating) Resist Area Electrode Standard Pattern Dimensions O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Microwave Coaxial Board to Board Connectors Microwave Coaxial Board to Board Connectors KSC Type

1. The microwave coaxial Board to Board connector is small, thin and suitable for internal wiring of cellular phone and small wireless equipment such as wearable equipment. 2. Receptacle size 1.3x1.2 (LxW), Occupation area 1.56mm Plug receptacle size 1.4x1.2 (LxW), Occupation area 1.68mm 3. Mating height is 0.6mm max., which is worlds lowest profile level, with plug receptacle and receptacle. 5. This has good lock feeling when plug receptacle and receptacle are mated. 6. This connector mates with MM6829-2700.

Cellular phone, Wearable equipment and other wireless equipment Specification (Insertion Loss & VSWR) (in mm) Scale: Free Tolerances Unless Otherwise Specified: ±0.2

0.4 I/O Terminal

0.3 1.4 0.3 1.2 0.08 Outer Terminal Inner Terminal VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) 0123456 2 1.4 0.6 0.2 1.6 1.8 1.2 0.8 0.4 Insertion Loss (dB) IL VSWR (Gating function) This data is reference only. Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) MM6831-2700 35 200 500 30 to 6 1.3 (DC to 3GHz) 1.4 (3GHz to 6GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C Measurement system: Refer to electrical performance measurement system (p. 33) Measurement condition: SMD plug + Receptacle O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM6831-2700RJ5: 180 mm dia. reel/5000 pcs. MM6831-2700RK20: 330 mm dia. reel/20000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity The standard solder cream stencil mask drawing (Thickness: 0.08mm) (in mm) 1.3 1.08 0.74 0.3 0.53 0.94 0.54 0.4 0.55 1.5 N A D B C (in mm) Part Number A B C D N W1 W2 MM6831-2700RJ5 MM6831-2700RK20 180+0/-3 330±2.0 13±0.2 13±0.2 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EFK 1.55±0.1 A P1 P2 T 4±0.1 0.25±0.1 0.2±0.1 W F AK B E D0 TP2 3° max.3° max. Standard Stencil Mask Pattern  I/O pattern should be designed to be the impedance match 50 ohm.  The material of PWB is the epoxy resin of glass fabric  The solder resist should be printed except for the land pattern on the PWB  Land pattern and solder resist pattern must be followed to avoid soldering defects. Standard Pattern Dimension, Stencil Mask Pattern Land (Gold Plating) Resist Area Electrode (in mm) 1.251.25 0.5 0.5 0.4 0.7 1.0 1.3 1.5 0.7 0.3 0.5 1.3 0.8 1.5 0.7 0.5 Standard Pattern Dimensions O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Microwave Coaxial Board to Board Connectors Microwave Coaxial Board to Board Connectors LSC Type

1. The microwave coaxial Board to Board connector is small, thin and suitable for internal wiring of cellular phone and small wireless equipment such as wearable equipment. 2. Receptacle size 1.7x1.6 (LxW), Occupation area 2.72mm Plug receptacle size 1.9x1.7 (LxW), Occupation area 3.23mm 3. Mating height is 0.6mm max., which is world lowest profile level, with plug receptacle and receptacle. 5. This has good lock feeling when plug receptacle and receptacle are mated. 6. This connector mate with MM7829-2700.

Cellular phone, Wearable equipment and other wireless equipment Specification (Insertion Loss & VSWR) (in mm) Scale: Free Tolerances Unless Otherwise Specified: ±0.2 0.3 0.07+/-0.1 1.8 1.9 0.3 1.7 (Dia. 1.64) 0.42 Outer Terminal Inner Terminal 0.08 VSWR 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 Frequency (GHz) This data is reference only. 0123456 2 1.4 0.6 0.2 1.6 1.8 1.2 0.8 0.4 Insertion Loss (dB) IL VSWR (Gating function) Part Number Center Contact Resistance (mΩ max.) Withstanding Voltage (Vrms) Insulation Resistance (MΩ) Durability (Cycle) Nominal Frequency Range (GHz) VSWR (dB max.) MM7831-2700 35 200 500 30 to 6 1.3 (DC to 3GHz) 1.4 (3GHz to 6GHz) Nominal Impedance: 50Ω Rated Voltage: 30Vrms Temperature Rating: -40 to 85°C Measurement system: Refer to electrical performance measurement system (p. 33) Measurement condition: SMD plug + Receptacle O30E.pdf Nov.1,2018 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

 There is the possibility to have the contact failure by flux shifting into contact point, if the excess solder is used by non-standard stencil mask pattern. Stencil mask pattern must be followed to avoid soldering defects. MM7831-2700RJ5: 180 mm dia. reel/5000 pcs. MM7831-2700RK20: 330 mm dia. reel/20000 pcs. Dimensions of Reel Dimensions of Taping Minimum Quantity The standard solder cream stencil mask drawing (Thickness: 0.08mm) (in mm) 1.8 1.4 1.05 0.4 0.4 1.9 1.44 0.94 1.6 N A D B C (in mm) Part Number A B C D N W1 W2 MM7831-2700RJ5 MM7831-2700RK20 180+0/-3 330±2.0 13±0.5 13±0.5 21±0.8 21±0.8 2±0.5 2±0.5 Dia. 60+1/-0 Dia. 100±1.0 9±0.3 9.4±1.0 11.4±1.0 13.4±1.0 (in mm) BW D 0 EFK 1.95±0.1 A P1 P2 T 4±0.1 0.25±0.1 0.2±0.1 W F AK B E D0 TP2 3° max.3° max. Standard Stencil Mask Pattern  I/O pattern should be designed to be the impedance match 50 ohm.  The material of PWB is the epoxy resin of glass fabric  The solder resist should be printed except for the land pattern on the PWB  Land pattern and solder resist pattern must be followed to avoid soldering defects. Standard Pattern Dimension, Stencil Mask Pattern Land (Gold Plating) Resist Area Electrode (in mm) 1.8 1.4 0.9 0.5 2.1 1.1 1 1 0.70.73 1.25 0.5 0.7 1.25 1.9 1.3 0.3 0.9 1.8 1.9 Standard Pattern Dimensions O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Connector performance is influenced by GND among inner layers of substrate. We recommend makeing space more than 0.4mm between connectors and GND. And please avoid placeing signal lines and power lines under connectors to prevent interference with signals which pass connectors. Connector performance is influenced by GND among inner layers of substrate. We recommend makeing space more than 0.4mm between connectors and GND. And please avoid placeing signal lines and power lines under connectors to prevent interference with signals which pass connectors. Microwave Coaxial Connectors, Microwave Coaxial Board to Board Connectors Microwave Coaxial Connectors with Switch Part Number X Y MM5829-2700 2.2 2.4 MM5831-2700 2.4 2.2 MM6829-2700 1.3 1.4 MM6831-2700 1.3 1.5 MM7829-2700 1.7 1.8 MM7831-2700 1.8 2.0 Part Number X Y MM8430-2610 4.0 4.1 MM8130-2600 2.8 2.9 MM8030-2610 2.3 2.3 MM8930-2600 1.7 1.8 MM8930-2620 1.7 1.8 MM8830-2600 1.3 1.5 Notice (Design) Z=50Ω X Y Do not place GND, signal lines, power lines, and so on. More than 400um GND Z=50Ω X Y Do not place GND, signal lines, power lines, and so on. More than 400um GND O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

When you mate/unmate connectors and cables, please use specialized engage/disengagement jig. Please mate to connectors when centering them and keeping parallel state. Mating is completed when you feel the click. Please confirm if mating height is in specification after mating is completed. Please do not stress more than 30N when mating connectors. Please mate to cable plugs and connectors when centering them and keeping parallel state. Mating is completed when you feel the click. Please confirm if mating height is in specification after mating is completed. Please do not stress more than 30N when mating cable plugs and connectors. Microwave Coaxial Connectors with Cable Microwave Coaxial Board to Board Connectors Notice (Engagement/Disengagement) O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

We have lineup of measurement probes that are designed for Murata connecters. Please use Murata probes for Murata connectors. This is used for evaluation in lab. Measurement cable is able to be attached with this probe. This probe stands itself after mating is completed, because it has claw at contact point with connectors. Any stress to probe via cable after engagement may cause that probe come off, connectors get damage, or electrode peel off. This probe is used for inspection in mass production process. Probes are built in measurement fixture, and pressed at connectors. This probe will not damage connectors because it doesn’t have locking function by claw. Measurement fixture needs to have floating mechanism since the probe doesn’t have floating mechanism itself. Measurement cable is able to be attached with this probe. This probe is used for inspection in mass production process. It has same function as Auto probe with floating mechanism. This probe is not affected by cable tension because of its special construction. The probe makes conversion cable easy to be handled. This is used for evaluation in lab. Measurement cable is assembled with probes. This probe stands itself after mating is completed, because it has claw at contact point with connectors. Any stress to probe via cable after engagement may cause that probe come off, connectors get damage, or electrode peel off. This probe is used for inspection in mass production process. Probes are built in measurement fixture, and pressed at connectors. This probe will not damage connectors because it doesn’t have locking function by claw. Measurement fixture doesn’t need to have floating mechanism since the probe has floating mechanism itself. This adapter is used for calibrating probes. This has SMA connector on one side and Murata connector shape on the other side. It can connect cable from network analyzer and tip of probe. Manual probe without cable Auto probe without floating mechanism Auto probe (tension free type) Manual probe with cable Auto probe with floating mechanism Calibration adapter Type of Probes O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

1. Measurement method of cables (1) Calibration Use CAL KIT to do SOLT calibration of measurement instrument. Use through PWB to do through calibration. (2) Measurement [1] Insertion Loss [2] VSWR Use Gating function of network analyzer to measure connector part. 2. Measurement method of board to board connectors (1) Calibration Use CAL KIT to do SOLT calibration of measurement instrument. Use through PWB to do through calibration. (2) Measurement [1] Insertion Loss [2] VSWR Use Gating function of network analyzer to measure connector part. Port1 Port2 Calibration SMA SMA Calibration Through PWB Port1 Port2 Calibration SMA SMA Calibration Through PWB Port1 SMA Port2 SMA Receptacle Cable connector EVB EVB Receptacle Port1 Port2SMA SMA EVB Port1 SMA Receptacle Cable connector EVB Gating Receptacle Port1 Port2SMA SMA EVB Gating Electrical Performance Measurement System (Insertion Loss, VSWR) O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

1. Engagement/Disengagement force [1] Engagement force To measure require force for complete engagement connectors and receptacles. Measuring engagement maximum force by pushing down of push-pull gauge with engagement/ disengagement tool on the tip. [2] Disengagement force To measure require force for complete disengagement connectors and receptacles from mated state. Measuring disengagement maximum force by pulling up of push-pull gauge with engagement/disengagement tool on the tip. xx.xx Push-pull gauge Vertical motorized test stand Engagement/Disengagement tool Connector (Cable connector or Board to Board connector) + Receptacle Mechanical Performance Measurement System (Engagement/Disengagement Force) O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Notice (Storage and Operating Condition) 1. Environment Conditions (1) This product is designed for use in electrical equipment in the environment (temperature, humidity, atmospheric pressure, etc.) specified in this approval drawing. It may not be used in the following environments or under the following conditions: (a) Ambient air containing corrosive gas (Cl 2, H2S, NH3, SOX, NOX etc.). (b) Ambient air containing volatile or combustible gas. (c) In liquid (water, oil, chemical solution, organic solvents, etc.). (d) In environments with a high concentration of airborne particles. (e) In direct sunlight. (f) Dusty conditions. (g) In freezing. (h) Other environments similar to the above conditions. (2) Contact the manufacturer before using the product in any of the above environments or under any of the above conditions. Notice (Soldering and Mounting) 1. Reflow soldering Soldering must be carried out without exceeding the allowable soldering temperature and time shown within the shaded area of Figure "Allowable Temperature and Time of Reflow Soldering". In case the soldering is repeated, the maximum time in Figure "Allowable Temperature and Time of Reflow Soldering" should be accumulated time. The standard soldering conditions are shown in Figure "Reflow Soldering Standard Conditions". Follow standard pattern dimensions. 2. Please contact us before use if concerning other soldering conditions. 3. In soldering, do not apply excessive mechanical force to terminals or leads greater than specified in the drawing. 4. Please note the following in case of soldering terminals or leads of the product. (1) Use Rosin based flux, but not with strong acid flux (Chlorine content should be less than 0.20wt%). (2) Flux should be cleaned thoroughly. 5. Please mount this product at the position so that stress by wrap and/or bend of the PCB may not apply to it. 6. Please dry out this product immediately after soldering and cleaning. 7. Please avoid the cleaning of this product for Microwave Coaxial Connector with Switch. 2. Storage Store in manufacturer's package or tightly re-closed box with the following conditions. Use this product within 6 months after receipt. Check the terminal solderability before use if the product has been stored for more than 6 months. Temperature: -10 to +40 degree C Humidity: 15 to 85% RH Allowable Temperature and Time of Reflow Soldering Reflow Soldering Standard Conditions 60 to 120 sec. T1 Time (sec.) Standard soldering condition Resistance to soldering heat condition tp0 (°C) 240+0/-5 260+5/-0 tp1 (°C) 220 240 T1 (sec.) 30 to 60 30max. t2 (°C) 150 to 180 150 to 180 Peak temperature tp0 tp1 100 Temperature (°C) Pre-heating 260 250 240 230 220 210 200 190 180 Time (sec.) Temperature (°C) Solder: Sn-3.0Ag-0.5Cu 30 60 90 120 150 180 210 240 Measuring point of temperature: In-Out Terminals of the Device Reflow Soldering: Both Convection and Infrared Rays : Hot Air : Hot Plate Notice O30E.pdf Nov.1,2018 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Murata Manufacturing Co., Ltd. www.murata.com Note

1 Export Control

For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specifi ed by the law is required for export.

2 Please contact our sales representatives or

product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party’ s life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog.

1 Aircraft equipment

2 Aerospace equipment

3 Undersea equipment

4 Power plant equipment

5 Medical equipment

6 Transportation equipment (vehicles, trains,

ships, etc.)

7 Traffi c signal equipment

8 Disaster prevention / crime prevention

9 Data-processing equipment

reliability requirements to the applications listed above

3 Product specifi cations in this catalog are as of

June 2018. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers.

4 Please read rating and CAUTION (for storage,

operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

6 Please note that unless otherwise specifi ed, we

shall assume no responsibility whatsoever for any confl ict or dispute that may occur in connection with the eff ect of our and/or a third party’ s intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the eff ect that any third parties are authorized to use the rights mentioned above under licenses without our consent.

7 No ozone depleting substances (ODS) under the

Montreal Protocol are used in our manufacturing process. Global Locations For details please visit www.murata.com Cat. No. O30E-9 O30E.pdf Nov.1,2018