MM1053 MITSUMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- Operating power supply voltage range V CC=4.75V~13V 2. Frequency response 0.1MHz~10MHz (±1.0dB) Package SIP-9A
Applications
- TV 2. VCR 3. Other video equipment Block Diagram OUT IN1 IN2 IN3 IN4 SW1 HLHL SW2 HHL L Control input truth table
MITSUMI 4-Input Video Switch (no clamp) MM1053 Pin Description Pin no. Pin name Function Internal equivalent circuit diagram
1 OUT Output
2 SW1 Switch 1
3 SW2 Switch 2
4 IN1 Input 1
5 GND Ground
6 IN2 Input 2
MITSUMI 4-Input Video Switch (no clamp) MM1053
7 VCC Power supply
8 IN3 Input 3
9 IN4 Input 4
Absolute Maximum Ratings (Ta=25°C) Item Symbol Ratings Units Storage temperature TSTG -40~+125 °C Operating temperature TOPR -20~+75 °C Power supply voltage VCC 15 V Allowable loss Pd 470 mW
MITSUMI 4-Input Video Switch (no clamp) MM1053 Electrical Characteristics (Except where noted otherwise, Ta=25°C, V CC=5.0V) Item Symbol Measurement Measurement conditions Min. Typ. Max. Units conditions Operating power supply VCC VCC 4.75 5.0 13.0 V voltage range Consumption current Id V CC 7.0 11.0 mA Voltage gain GV TP3 SG : Sine wave 2VP-P, 0.1MHz *1 -0.5 0 0.5 dB Frequency characteristic FC TP3 SG : Sine wave 2VP-P -10 1 d B 10MHz/0.1MHz *1 Differential gain DG TP3 SG : Staircase wave 2VP-P, APL=10, 50, 90% 03% Differential phase DP TP3 SG : Staircase wave 2VP-P, APL=10, 50, 90% 0 3 deg Output offset voltage Voff TP2 100 mV Crosstalk CT TP3 SG : Sine wave 2VP-P, 4.43MHz *2 -65 -55 dB Switching voltage 1 VTH1 TP4 SG : Sine wave 2V P-P, 0.1MHz *3 0.7 1.4 2.1 V Switching voltage 2 VTH2 TP5 SG : Sine wave 2V P-P, 0.1MHz *3 0.7 1.4 2.1 V Input impedance RI TP3 15 k Ω Output impedance RO TP3 15 Ω *1 Voltage gain GV, frequency response FC If input at TP1 for 0.1MHz sine wave input is V1, and output at TP3 is V2, and output for 10MHz input is V3, then : V2GV=20LOG V1 V3FC=20LOG V2 *2 Crosstalk CT If input at TP1 for 4.43MHz sine wave input is V4, and output at TP3 is V5, then : V5CT=20LOG V4 *3 Switching voltage VTH1, VTH2 TP4 level is VTH1 when TP4 DC level is changed by the external power supply and the output signal switches. TP5 level is VTH2 when TP5 DC level is changed by the external power supply and the output signal switches.
MITSUMI 4-Input Video Switch (no clamp) MM1053 Switch Modes Item Symbol Switch Mode S1 S2 S3 S4 S5 S6 Consumption current I d 222233 122211 Voltage gain Gv 212231 221213 222133 122211 Frequency gain FC 212231 221213 222133 122211 Differential gain DG 212231 221213 222133 122211 Differential phase DP 212231 221213 222133 222211 Output offset voltage Voff 222231 222213 222233 212211 221211 222111 221231 222131 Crosstalk C T 122231 222113 122213 212213 122233 212233 221233 Switching voltage V TH1 122221 VTH2 122212
MITSUMI 4-Input Video Switch (no clamp) MM1053 Measuring Circuit