MKT100102J500A

MKT100104J101T SHARMA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 29

Technical content

Series Dielectric/ Lead Spacing Capacitance Range Style (Former Series) Construction millimeters / (inches) Voltage Range MKT 050 Metallized Polyester 5.0 (0.200”) 0.001 µF to 1.0 µF (MKT1.85) Molded can 50 VDC to 400 VDC MKT 075 Metallized Polyester 7.5 (0.300”) 0.033 µF to 0.33 µF (MKT1.67) Molded can 100 VDC to 630 VDC (MKT1.60) Molded can 22.5 (0.886”), 27.5 (1.083”) 100 VDC to 1000 VDC MKT 00S Metallized Polyester Surface Mount 0.01 µF to 0.22 µF (SMX) Epoxy molded 50 VDC to 630 VDC (MPD-1) Epoxy dipped 22.5 (0.886”), 27.5 (1.083”) 100 VDC to 630VDC (MPD-2) Epoxy dipped 17.5 (0.689”), 25.0 (0.984”) 100 VDC to 630VDC 27.5 (1.083”) (MPD-3) Epoxy dipped 17.5 (0.689”), 25.0 (0.984”) 100 VDC to 630VDC 27.5 (1.083”) MKTR Metallized Polyester Rounded Axial 0.01 µF to 6.8 µF (MPR) Tape wrapped 63 VDC to 630 VDC MKTO Metallized Polyester Oval Axial 0.01 µF to 6.8 µF (MPO) Tape wrapped 63 VDC to 630 VDC PLASTIC FILMS USED IN CAPACITORS The capacitance value of a capacitor depends on the area of the dielectric separating the two conductors, its thickness and the dielectric constant. Other properties of the film such as the temperature coefficient, the dissipation factor, the voltage handling capabilities, its suitability to be metallized etc. also influence the choice of the dielectric. POLYESTER FILM This film has a relatively high dielectric constant which makes it suitable for designs of a capacitor with high volumetric efficiency. It also has high temperature stability, high voltage and pulse handling capabilities and can be produced in very low thickness. It can also be metallized. Polyester is a popular dielectric for plain film capacitors as well as metallized film capacitors. Quick Reference Guide FILM CAPACITORS SHARMA MKT 050 MKT 075 MKT 100 MKT 00S MKT D01 MKT D02 MKT D03 MKTR MKTO (former series) MKT1.85 MKT1.67 MKT1.60 SMX MPD-1 MPD-2 MPD-3 MPR MPO Arcotronics R.85 R.66 R.60 LDA - - - - - Evox MMK 5 MMK MMK - - - - - - MEPCO* 712A 1 719A 1 719A 1 - 712A 1 712A 1 712A 1 - - Philips 370 371 372 & 373 - 367 to 369 366 to 369 367 to 369 - - Roederstein MKT1817 MKT1818 MKT1822 MKT1824 - - - MKT1813 - Siemens B32529 B32520/30 B32521/31 - 5140 to 44 5140 to 44 5140 to 44 - - Thompson IRD/MC IRD/MC IRD/MC - MD MD MD - - Wima MKS 2 MKS 3 MKS 4 SMD 7.3 - - - - POLYPROPYLENE FILM The dielectric constant of polypropylene is slightly higher than that of polyester which makes the capacitors relatively bigger in size. This film has a low dissipation factor and excellent voltage and pulse handling capabilities together with a low and negative temperature coefficient which is an ideal characteristic for many designs. Polypropylene has the capability to be metallized. POLYSTYRENE FILM The dielectric constant of Polystyrene is relatively lower resulting in larger physical size of capacitors. Though the temperature handling capability of this film is lower than that of the other films, it is extremely stable within the range. Its low dissipation factor and the negative, near linear temperature coefficient characteristics make it the ideal dielectric for precision capacitors. Polystyrene cannot be metallized. Cross Reference Guide * MEPCO SERIES ARE BEING REPLACED WITH PHILIPS SERIES AS LISTED IN THE TABLE. BOTH SERIES ARE LISTED FOR YOUR CONVENIENCE. Sharma Film Capacitors

The Capacitance value is marked in µF along with the Tolerance code and the DC Voltage Figures on the side of the capacitors. The capacitance is also marked in Capacitance code with the first two digits representing the significant digits followed by one digit representing the number of zeros. The SAHA logo may be replaced with marking, "SH", “S” or no brand marking depending on the limitation of space. The Capacitance value is marked in µF together with the Tolerance code and the DC Voltage Figures on the top surface of the capacitors. The capacitance is also marked in Nano Farads with "n" representing the decimal point in the capacitance value. The SAHA logo and series codes, MKT100, MKP 100, KP300 etc., or their former series designations, are marked on the side. MKT100 series is supplied in certain cases, without series code marking. SAHA logo may be replaced with marking, "SH" or “S” depending upon the limitations of space. All other types of capacitors such as tape wrapped axial, tape wrapped radial, vertical box type etc.,. are also marked on the body of the capacitor with the similar information in one of the combinations, as explained above. In addition, in certain cases, the outer foil side is also indicated with a dot or ring. BOX TYPE DIPPED TYPE OTHER TYPES 2.2J250 MKT 100 2.2K250 Ordering/Part Numbering Example below indicates: MKT100 Series, 0.1µF, 5% Tol., 100 Volts, Bulk. (EXAMPLE) M K T 1 0 0 1 0 4 J 1 0 1 Series Enter Series Code: (Up to 6 Digits) MKT050, MKT075, MKT100, MKT00S, MKTD01, MKTD02, MKTD03, MKTR, MKTO. Capacitance Enter EIA Capacitance Code: (3 Digits) First Two Digits Represent Significant Figures of Capacitance in Picofarads. Third Digit Indicates Number of Zeros Example:1000pF = 102 0.01uF = 103 Tolerance Enter Capacitance Tolerance Code: (1 Digit) Tolerance SPCL ± 1% ± 2% ± 3% ± 5% ± 6% ± 10% ± 20% Code A F G L J H K M Rated Voltage Enter Voltage Code: (3 Digits) First Two Digits Represent Significant Figures of DC Voltage unless individual data sheet specifies Only AC Rating. Third Digit Indicates Number of Zeros Example:50V DC = 500 250V DC = 251 Product Packaging Code Standard for Film Capacitors is Bulk packing. No Packaging Code Required for Bulk Style. For other packaging styles, Enter packaging code listed below. (1 Digit) Packaging Packaging Code Style T Tape / Reel A Ammo ( no code) Bulk Sharma Film Capacitors

ELECTRICAL - BASIC PARAMETERS

1.1 RATED CAPACITANCE

The nominal or rated value of capacitance is measured at 25 °C in an measuring bridge with 1K Hz source, free of harmonics. Please refer to relevant series for the range of capacitance value covered. Capacitance is frequency and temperature dependent. The variation pattern of capacitance with temperature and frequency is explained in sections 2.1 and 2.2.

1.2 CAPACITANCE TOLERANCE

The permitted variation of actual value from the nominal value is termed the tolerance. The tolerance is expressed in percentage. The standard tolerances for plastic film capacitors are ±5% (J), ±10% (K) and ±20% (M).

1.3 RATED VOLTAGE

The voltage at which the capacitor can operate continuously up to a temperature of 85 °C (unless otherwise specified) is the rated voltage. As this is a critical parameter for choosing a capacitor, the case sizes are listed in a matrix of capacitance value and rated voltage.

1.4 CATEGORY VOLTAGE

The maximum voltage that may be applied continuously over the temperature range is termed the category voltage. This is same as the rated voltage up to 85 °C unless otherwise specified in the climactic category of the product. Above 85 °C a derating has to be applied depending upon the dielectric.

1.5 OPERATING TEMPERATURE

This is the temperature range with in which the capacitor can function as specified in the climactic category. Please refer to relevant sections for derating above the temperature at which the full rated voltage can be applied.

1.6 DISSIPATION FACTOR

This is the measurement of tangent of loss angle (tan d) and is expressed as a percentage. Measurement of dissipation factor is carried out at 1 K Hz. or 10 K Hz. as specified in the data sheet of the relevant series at 25 °C. Dissipation factor is temperature and frequency dependent. The nature of variation of dissipation factor with temperature and frequency for different dielectric are

1.7 INSULATION RESISTANCE

Insulation Resistance is the electrical resistance offered by the capacitor. The Insulation Resistance is measured directly in Mega Ohms where as for higher capacitance values it is expressed in seconds as the product of M Ohm and µF.

1.8 PULSE RISE TIME

The pulse rise time or dv/dt rating is the capability of the capacitor to handle rapid changes in voltage or pulse. This is expressed in terms of Volts per µseconds. The dv/ dt rating of a capacitor depends upon the dielectric as well as the design and construction of the capacitors. The dv/dt values of different types of capacitors are listed in the corresponding data sheets of the capacitors. ELECTRICAL - EFFECTS AND RELATIONS

2.1 TEMPERATURE DEPENDENCE OF CAPACITANCE

Capacitance of plastic film capacitors vary with temperature. However the pattern of variation is different for different plastic film dielectrics such as Polystyrene, Polyester and Polypropylene. The The variation patterns for these dielectrics are shown in figure 2.1A, 2.1B and 2.1C. The rate of change of capacitance with temperature is termed the Temperature Coefficient. The nominal values of temperature coefficient for different dielectrics are shown below.

2.2 FREQUENCY DEPENDENCE OF CAPACITANCE

Capacitance reduces with increase in frequency. The variation pattern for different dielectrics are shown in figure 2.2A, 2.2B and 2.2C.

2.3 TEMPERATURE DEPENDENCE OF

The dissipation factor varies with temperature. Each dielectric follows a unique variation pattern. The variation pattern for different dielectrics are shown in figure 2.3A, 2.3B and 2.3C. PERFORMANCE CHARACTERISTICS Figure 2.1B Figure 2.1C Figure 2.2A Figure 2.2C Figure 2.2B Polyester Capacitance Change Vs. Temperature Polypropylene Capacitance Change Vs. Temperature Polystyrene Capacitance Change Vs. Frequency Polyester Capacitance Change Vs. Frequency Polypropylene Capacitance Change Vs. Frequency DIELECTRICS POLYSTYRENE POLYESTER POLYPROPYLENE TEMPERATURE COEFFICIENT -150 ppm +400 ppm -200 ppm Figure 2.1A Polystyrene Capacitance Change Vs. Temperature Sharma Film Capacitors

Figure 2.3A Polystyrene Dissipation Factor Vs. Temperature

2.4 FREQUENCY DEPENDENCE OF

Dissipation factor increased with frequency. The variation pattern is different for different dielectrics. The typical variation pattern for different dielectrics are shown in fig. 2.4A, 2.4B and 2.4C.

2.5 TEMPERATURE DEPENDENCE OF INSULATION

The insulation resistance of the dielectric varies with temperature. The variation pattern is different fro different dielectric films. The typical variation pattern for different dielectrics are shown in figure 2.5A, 2.5B and 2.5C. ELECTRICAL - AC APPLICATIONS When a capacitor is connected to alternating voltage its electrodes are alternately charged positive and negative. The charge alternates with a rhythm of double the frequency of the alternating voltage. Thus there is alternating current flowing in the leads of the capacitor.

3.1 ACROSS THE LINE APPLICATIONS

In this application the capacitor is connected between the lines, ie, between the main phase and neutral line terminals. In this type of application, failure of capacitor due to short circuit will not result in an electric shock. The capacitors rated for normal across the line applications are termed class-X2 capacitors.

3.2 BETWEEN LINE AND GROUND APPLICATIONS

In this type of application the capacitors are connected between the line and the ground, ie, between the phase terminal and the body. In this application, failure of the capacitor due to short circuit could possibly expose somebody touching the appliance to an electric shock. The capacitors rated for this application are termed class- Y capacitors. MECHANICAL CHARACTERISTICS

4.1 RESISTANCE TO SOLVENTS

The encapsulation technics adopted in the manufacture of plastic film capacitors ensure resistance to a wide range of solvents and cleaning liquids. The epoxy end sealed boxed capacitors can stand Trichloro trifluorethane, Methanol, Ethanol, Isopropanol and Aqueous cleaning solvents.

4.2 SOLDERABILITY

A minimum of 3/4 of the circumferential surface of the terminations will be covered with new solder when dipped in molten solder bath at 230 °C for 2 ±1 sec. after immersing in methanol - rosin solution at room temperature for 5 to 10 seconds. Figure 2.3B Figure 2.3C Polyester Dissipation Factor Vs. Temperature Polypropylene Dissipation Factor Vs. Temperature Figure 2.4A Figure 2.4B Polystyrene Dissipation Factor Vs. Frequency Polyester Dissipation Factor Vs. Frequency Figure 2.4C Polypropylene Dissipation Factor Vs. Frequency Figure 2.5A Polystyrene Insulation Resistance Vs. Temperature Figure 2.5B Polyester Insulation Resistance Vs. Temperature Figure 2.5C Polypropylene Insulation Resistance Vs. Temperature

4.3 TERMINAL STRENGTH

The leads are made of tinned copper wire. The terminals are capable of withstanding an axial load of 2.25 Kgs(5 lbs). ENVIRONMENTAL RESISTANCE TO HUMIDITY The capacitor samples will be exposed to 93 ±2 °C for 56 days at 40 ±2 °C. After the test the capacitance change shall be within 3% of the original value, The insulation resistance shall be within 50% of the initial limits and the dissipation factor shall remain within the initial specifications. Sharma Film Capacitors

T x H x L CARTON REEL PACK AMMO PACK 2.5 x 6.5 x 7.2 3000 2500 3500 3.0 x 6.5 x 7.2 3000 2100 2900 3.5 x 7.5 x 7.2 2000 1800 2500 4.5 x 9.5 x 7.2 1500 1400 1900 5.0 x 10.0 x 7.2 1000 1200 NA 6.0 x 11.0 x 7.2 2000 1000 NA 7.2 x 13.0 x 7.2 1500 800 NA Taping Dimensions for MKT 050 Series (5mm Pitch) DESCRIPTION DIMENSION TOLERANCES mm Inches mm Inches P Taping pitch 12.7 0.500 ±1 ±0.039 P0 Sprocket hole pitch 12.7 0.500 ±0.2 ±0.008 P1 Centering of lead wire 3.85 0.152 ±0.7 ±0.028 P2 Centering of the body 6.35 0.250 ±1.3 ±0.051 dS Component alignment 0 0.000 ±2 ±0.079 Center to component body or 18.5 or 0.728 W0 Width of adhesive tape 6 min. 0.236 min. W1 Sprocket hole alignment 9 0.354 ±0.5 ±0.020 D0 Position hole diameter 4 0.157 ±0.2 ±0.008 t Tape thickness 0.7 0.028 ±0.2 ±0.008 Packaging Specifications Bulk, Tape/Reel & Ammo Pack INTRODUCTION The MKT 050 Series Metallized Polyester Film Capacitors are miniature capacitors with 5 mm lead spacing. This series covers a wide range of values and voltages and exhibit excellent high frequency characteristics. In addition to specific applications such as Blocking, By- passing and Coupling, this series is widely used in all General Purpose applications.

FEATURES

• Wide value and Voltage range
• Ultra miniature size
• Flame retardant case and potting
• Consistent dimensions and surface finish due to molded case construction
• Available in tape & reel form for automatic insertion
• Self healing capability GENERAL SPECIFICATIONS: Dissipation factor:For capacitance ≤ 0.1 µF= 0.010 max at 1 KHz, 0.015 max at 10 KHz, 10 KHz. Insulation resistance:For nominal voltage < 100 V DC;‡10,000 M Ohms for C ≤ 0.10 µF, ‡1,000 seconds for C > 0.10 µF. For nominal voltage ≤ 100 V DC; ‡ 30,000 M Ohms for C ≤ 0.10 µF, ‡1,000 seconds for C> 0.10 µF at a temperature of 25 ± 5°C. Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M) Voltage Test:1.6 times the rated voltage applied between terminals for 2 seconds at a temperature of 25 ± 5 °C Temperature range: -55 to 100 °C with derating above 85 °C Climatic category: F M D DIMENSIONS AND TOLERANCES: "d"= 0.5 to 0.6mm (0.020 to 0.024") for dimension “T”≤ 3.5mm (0.138”) for dimension “T” >3.5mm (0.138”) "LL''= 4.0 +1.5mm (0.16 +0.06")for Bulk Supply MKT 05 0 SERIES FFoorrmmeerrllyy MMKKTT 11..8855 sseerriieess RATED Capacitance dv/dt VOLTAGE RangeµF value 50 0.001-1.0 4 63 0.001-1.0 8 100 >0.0068 10 100 0.0033-0.0068 15 100 >0.0033 30 250 0.001-1.0 20 400 0.001-1.0 40 PULSE RISE TIME (dv/dt) Volts per µsec. LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. Sharma Film Capacitors

MKT 05 0 SERIES CAS E DIMENSIONS Voltage 50 V DC / 30 V AC 63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC Cap Value Dimensions in MM Dimensions in MM Dimensions in MM DIMENSIONS IN MM DIMENSIONS IN MM in µF L H T S L H T S L H T S L H T S L H T S Voltage 50 V DC / 30 V AC 63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC Cap Value Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches in µF L H T S L H T S L H T S L H T S L H T S Case Dimensions in Millimeters 50V • 63V • 100V • 250V • 400V Case Dimensions in Inches 50V • 63V • 100V • 250V • 400V Sharma Film Capacitors

Voltage 100 V DC / 63 V AC 160 V DC / 90 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC 630 V DC / 220 V AC 1000 V DC / 250 V AC Cap Value Dimensions in Millimeters Dimensions in Millimeters Dimensions in Millimeters Dimensions in Millimeters Dimensions in Millimeters Dimensions in Millimeters in µF L H T S L H T S L H T S L H T S L H T S L H T S INTRODUCTION: The MKT 100 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. These capacitors also have good high frequency characteristics. In addition to some specific applications such as Blocking, By-passing and Coupling, this series is widely used in all General Purpose applications. FEATURES:

• Wide value and Voltage range
• Flame retardant case and potting
• Consistent dimensions and surface finish due to molded case construction
• Self healing capability MKT 10 0 SERIES FFoorrmmeerrllyy MMKKTT 11..6600 sseerriieess DIMENSIONS AND TOLERANCES: 0.04") Tolerance on "s" ± 0.4mm (0.016") GENERAL SPECIFICATIONS: Dissipation factor:≤ 0.0150 at 10K Hz for capacitance ≤ 1.0 µF ≤ 0.0100 at 1 K Hz for capacitance> 1.0 µF Insulation resistance:For nominal voltage > 100 V DC, ‡30,000 M Ohms for C≤ 0.33 µF, ‡10,000 seconds for C> 0.33 µF, For nominal voltage ≤ 100 V DC, ‡10,000 M Ohms for C≤ 0.10 µF, ‡1,000 seconds for C> 0.10 µF at a temperature of 25 ± 5 °C. Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M). Voltage Test: 1.6 times the rated voltage applied between terminals for 2 seconds at a temperature of 25 ± 5 °C. Temperature range: -55 to 100 °C with derating above 85 °C. Climatic category:F M D RATED LEAD SPACING mm (inches) 100 6 3 2 1 160 8 5 3 2 250 11 7 4 3 400 20 10 5.5 5 630 30 15 8 7 1000 60 25 15 10 PULSE RISE TIME (dv/dt) Volts per µsec. LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. Case Dimensions in Millimeters 100V • 160V• 250V• 400V• 630V• 1000V Sharma Film Capacitors

Voltage 100 V DC / 63 V AC 160 V DC / 90 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC 630 V DC / 220 V AC 1000 V DC / 250 V AC Cap Value Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches in µF L H T S L H T S L H T S L H T S L H T S L H T S Case Dimensions in Inches 100V • 160V• 250V• 400V• 630V• 1000V INTRODUCTION: The MKT 075 Series Metallized Polyester Film Capacitors are specially designed for use in thickly populated Printed Circuit Boards where miniaturization is important. These capacitors are widely used in all General Purpose applications. FEATURES:

• Wide value and Voltage range
• Flame retardant case and potting
• Consistent dimensions and surface finish due to molded case construction
• Self healing capability GENERAL SPECIFICATIONS: Dissipation factor: ≤ 0.015 at 10 K Hz for capacitance< 1.0 µF Insulation resistance:For nominal voltage ≤ 100 V DC, ‡10,000 M Ohm for C≤ 0.1µF, ‡1,000 seconds for C> 0.1µF, For nominal voltage > 100 V DC, ‡30,000 M Ohm for C≤ 0.33µF, ‡10,000 seconds for C> 0.33µF. Capacitance tolerance: Voltage Test :1.6 times the rated voltage applied between terminals for 2 seconds. at temperature of 25 ± 5 °C Temperature range: -55 to 100 °C with derating above 85 °C Climatic category:F M D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. RATED dv/dt - Volts- VOLTAGE per µ Seconds 100 6 250 15 400 30 630 40 PULSE RISE TIME (dv/dt) Volts per µsec. DIMENSIONS AND TOLERANCES: for dimension “T” = 4mm (0.160”) for dimension "T" > 4mm (0.160") (0.24 ± 0.04") Tolerance on "s" ± 0.4mm (0.016") MKT 07 5 SERIES FFoorrmmeerrllyy MMKKTT 11..6677 sseerriieess MKT 10 0 SERIES CASE DIMENSIONS CONTINUED Sharma Film Capacitors

INTRODUCTION: The MKTD01 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. They are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. FEATURES:

• Wide value and Voltage range
• Self healing capability
• Flame retardant powder epoxy encapsulation
• Minimum overall dimensions due to dip coated construction GENERAL SPECIFICATIONS: Dissipation factor:< 0.0100 at 1 K Hz for capacitance ≤ 1.0 µF, < 0.0150 at 1 K Hz for capacitance> 1.0 µF. Insulation resistance:For 100 VDC rated parts; ‡ 9,000 M Ohms for C ≤ 0.33 µF, ‡ 3,000 seconds for C> 0.33 µF, at a temperature of 25 ± 5 °C, For 250 to 630 VDC rated parts; ‡ 15,000 M Ohms for C ≤0.33 µF, ‡ 5,000 seconds for C> 0.33 µF, at a temperature of 25 ± 5 °C. Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M) (Special parts with close tolerance of ±1% and ±2% available on request)Voltage Test :1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 ± 5 °C Temperature range:-55 to 85 °C. Climatic category:F M F LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3.Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. LEAD SPACING mm (inches) Rated 10.0 15.0 22.5 27.0 100 6 3 2 1 250 11 7 4 3 400 20 10 5.5 5 630 30 15 8 7 DIMENSIONS AND TOLERANCES: for Lead Spacing "s" = 10.0 mm (0.40") for Lead Spacing "s" > 10.0 mm (0.40") max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" ± 1.0mm (0.04") PULSE RISE TIME (dv/dt) Volts per µsec. MKTD0 1 SERIES FFoorrmm eerrllyy MM PP DD 11 sseerriieess VOLTAGE DC/AC Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC in µF Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S VOLTAGE DC/AC Capacitance 400 V DC / 200 V AC 630 V DC / 250 V AC in µF Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S Case Dimensions in Millimeters100V • 250V VOLTAGE DC/AC Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC in µF Dimensions in Inches Dimensions in Inches L H T S L H T S VOLTAGE DC/AC Capacitance 400 V DC / 200 V AC 630 V DC / 250 V AC in µF Dimensions in Inches Dimensions in Inches L H T S L H T S Case Dimensions in Inches 100V • 250V MKT 07 5 SERIES CASE DIMENSIONS Sharma Film Capacitors

Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC in µF Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S VOLTAGE DC/AC Capacitance 400 V DC / 200 V AC 630 V DC / 220 V AC in µF Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S Case Dimensions in Millimeters 100V • 250V • 400V • 630V VOLTAGE DC/AC Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC in µF Dimensions in Inches Dimensions in Inches L H T S L H T S VOLTAGE DC/AC Capacitance 400 V DC / 200 V AC 630 V DC / 220 V AC in µF Dimensions in Inches Dimensions in Inches L H T S L H T S Case Dimensions in Inches 100V • 250V • 400V • 630V INTRODUCTION: The MKTD02 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series has lead spacing starting from 7.5mm. and covers more values than the conventional series. They are suitable for applications such as Blocking, By- passing and Coupling and are widely used in General communication equipment. FEATURES:

• Wide value and Voltage range
• Self healing capability
• Flame retardant powder epoxy encapsulation
• Minimum overall dimensions due to dip coated construction GENERAL SPECIFICATIONS: Dissipation factor:< 0.0100 at 1 K Hz for capacitance≤ 1.0 µF, < 0.0150 at 1 K Hz for capacitance> 1.0 µF. Insulation resistance:For 100 VDC rated parts; ‡ 9,000 M Ohms for C≤ 0.33 µF, ‡ 3,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C. For 250 to 630 VDC rated parts; ‡ 15,000 M Ohms for C≤ 0.33 µF, ‡ 5,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C. Capacitance tolerance:±5%(J), ±10%(K) and ±20%(M ) Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 ± 5 °C. Temperature range:-55 to 85 °C Climatic category: F M F LEAD SPACING mm (inches) 100 6 6 3 2 1 250 15 11 7 4 3 400 30 20 10 5.5 5 630 40 30 15 8 7 DIMENSIONS AND TOLERANCES: for Lead Spacing "s" = 10.0 mm (0.40") for Lead Spacing "s" > 10.0 mm (0.40") max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" ± 1.0mm (0.04") PULSE RISE TIME (dv/dt) Volts per µsec. MKT D0 2 SERIES FFoorrmm eerrllyy MMPPDD 22 sseerriieess LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. MKTD0 1 SERIES CASE DIMENSIONS Sharma Film Capacitors

Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC in µF Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S VOLTAGE DC/AC CAPACITANCE 400 V DC / 200 V AC 630 V DC / 220 V AC in µF Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S Case Dimensions in Millimeters 100V • 250V • 400V • 630V VOLTAGE DC/AC CAPACITANCE 100 V DC / 63 V AC 250 V DC / 160 V AC in µF Dimensions in Inches Dimensions in Inches L H T S L H T S VOLTAGE DC/AC CAPACITANCE 400 V DC / 200 V AC 630 V DC / 220 V AC in µF Dimensions in Inches Dimensions in Inches L H T S L H T S Case Dimensions in Inches 100V • 250V • 400V • 630V MKT D0 2 SERIES CASE DIMENSIONS Sharma Film Capacitors

INTRODUCTION: The MKTD03 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series provides alternative dimensions for the same values covered by the other MKTD series. These capacitors are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. FEATURES:

• Wide value and Voltage range
• Self healing capability
• Flame retardant powder epoxy encapsulation
• Minimum overall dimensions due to dip coated construction GENERAL SPECIFICATIONS: Dissipation factor:< 0.0100 at 1 K Hz for capacitance≤ 1.0 µF, < 0.0150 at 1 K Hz for capacitance> 1.0 µF. Insulation resistance:For 100 VDC rated parts; ‡ 9,000 M Ohms for C≤ 0.33 µF, ‡ 3,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C. For 250 to 630 VDC rated parts; ‡ 15,000 M Ohms for C ≤ 0.33 µF, ‡ 5,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C Capacitance tolerance:±5%(J), ±10%(K) and ±20%(M). Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 ± 5 °C. Temperature range: -55 to 85 °C. Climatic category: F M F LEAD SPACING mm (inches) Rated 10.0 15.0 22.5 27.0 100 6 3 2 1 250 11 7 4 3 400 20 10 5.5 5 630 30 15 8 7 DIMENSIONS AND TOLERANCES: d - 0.6 mm (0.024") for Lead Spacing "s" = 10.0 mm (0.40") d - 0.8 mm (0.032") for Lead Spacing "s" > 10.0 mm (0.40") z - 1.5mm ( 0.06" ) max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" ± 1.0mm (0.04") for s ≤15mm(0.6”). Tolerance on "s" ± 1.5mm (0.06") for s ≤20mm(0.78”). PULSE RISE TIME (dv/dt) Volts per µsec. MKT D0 3 SERIES FFoorrmmeerrllyy MMPPDD 33 sseerriieess VOLTAGE DC/AC Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC in µF Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S 10 30.0 26.0 21.5 27.5 VOLTAGE DC/AC Capacitance 400 V DC / 200 V AC 630 V DC / 220 V AC in µF Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S Case Dimensions in Millimeters 100V • 250V • 400V • 630V LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. VOLTAGE DC/AC Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC in µF Dimensions in Inches Dimensions in Inches L H T S L H T S 10 1.181 1.024 0.846 1.083 VOLTAGE DC/AC Capacitance 400 V DC / 200 V AC 630 V DC / 220 V AC in µF Dimensions in Inches Dimensions in Inches L H T S L H T S Case Dimensions in Inches 100V • 250V • 400V • 630V Sharma Film Capacitors

• Very small size, Epoxy coating, Flame retardant to UL94V-0 7.5mm Lead spacing. - Self-healing metallized polyester dielectric, Non-inductive construction. - High performance and efficiencies. Custom values, voltages, and case sizes available upon request. Application - Multi-purpose - Blocking & coupling - By-passing & Filtering, Timing Specifications Capacitance Range 0.001µF to 1.0µF Operating temperature -40 to +85°C (up to 100°C - derate voltage 1.25% per °C ) Rated Voltage 50/63, 100, 250, 400, 630, 1000V dc Capacitance Tolerance ±2(G), ±5(J), ±10(K) % Tangent of Loss Angle 0.008 or LESS (at 1KHz +25°C) Insulation Resistance Voltage Charge : 1 min at +25°C, ±5°C

50 Vdc for Vr<100Vdc, 100Vdc for Vr≥100Vdc

9,000 or more, c≤0.33µf 5000S or more c>0.33µf Voltage Test 1.6 x Vr applied for 2sec +25°C, 5°C (Between Terminal) Endurance +85°C, ±2°C, 1.25 x Vr, 1000Hr Cap Change: < ±5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value Damp Heat +40°C±2°C, 93% ±2%, 21days Cap Change: < ±5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value Construction Non-inductive wound metallized polyester film Epoxy dipped encasement, Flame retardant to UL94V-0 Lead Material Color of Body Markings Solder coated or Tinned solid wire Orange/Brown Capacitance, Tolerance, Voltage When space permits, Capacitor Type will be marked -S pecial size or items on request. - Tolerance Dimension ±0.5 mm. Sharma Film Capacitors Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 MKTD04 SERIES

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Capacitance µF code 0.0010 102 0.0012 122 0.0015 152 0.0018 182 0.0022 222 0.0027 272 0.0033 332 0.0039 392 0.0047 472 0.0056 562 0.0068 682 0.0082 822 50/63DC Tmax Hmax Wmax P d 100VDC Tmax Hmax Wmax P d 250VDC Tmax Hmax Wmax P d 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Capacitance µF code 0.0010 102 0.0012 122 0.0015 152 0.0018 182 0.0022 222 0.0027 272 0.0033 332 0.0039 392 0.0047 472 0.0056 562 0.0068 682 0.0082 822 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 400V DC Tmax Hmax Wmax P d - - - 7.5 0.6 - - - - - - - - - - - - - - - - - - - - - - - - - 630V DC Tmax Hmax Wmax P d - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1000V DC Tmax Hmax Wmax P d - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Description Symbol Dimensions (mm) Lead Spacing 7.5mm Toll Lead wire diameter Фd 0.6 ±0.05 Taping pitch P 12.7 ±0.1 Sprocket hole pitch P0 12.7 ±0.2 Centering of the lead wire P 3.75 ±0.5 Centering of the body P2 0 - Lead spacing F 7.5 ±0.8 Component alignment ∆h 0 ±2.0 Height from sprocket hole H1 20.0 ±0.5 Height H 16.0 ±0.5 Center to the comp body L 11.0 ±0.5 Tape width W 18.0 +1.0-0.5 Width of adhesive tape W0 13.0 ±0.5 Sprocket hole alignment W1 9.0 ±0.5 Position of adhesive tape W2 3max Sprocket hole diameter D0 4.0 ±0.2 Tape thickness T 0.7 ±0.2 Standard Packing Quantity For Box Sharma Film Capacitors Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Taping Specifications For Automatic Insertion

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 50-100V 250V 400V 630V 1000V 102-124 values 1800PCS 102-273 values 2000PCS 102-822 values 2000PCS 102-392 values 2000PCS 102-182 values 2000PCS 154-224 values 1500PCS 333-524 values 1500PCS 103-223 values 1500PCS 472-822 values 1500PCS 222-332 values 1500PCS 274-474 values 1200PCS 154-184 values 1200PCS 273-393 values 1200PCS 103-123 values 1200PCS 392-822 values 1200PCS 564-824 values 1000PCS 224-274 values 1000PCS 473-563 values 1000PCS 153-223 values 1000PCS 103 value 1000PCS - - 334-474 values 800PCS 683-823 values 800PCS 273-333 values 800PCS - - - - 564-684 values 700PCS 104 value 700PCS 393 value 700PCS - -

• Very small size, Epoxy coating, Flame retardant to UL94V-0 5mm Lead spacing. - Self-healing metallized polyester dielectric, Non-inductive construction. - High performance and efficiencies. Custom values, voltages, and case sizes available upon request. Application - Multi-purpose - Blocking & coupling - By-passing & Filtering, Timing Specifications Capacitance Range 0.001µF to 1.0µF Operating Temperature -40 to +85°C (up to 100°C - derate voltage 1.25% per °C ) Rated Voltage 50/63, 100, 250, 400, 630V DC Capacitance Tolerance ±2(G), ±5(J), ±10(K) % Tangent of Loss Angle 0.008 or LESS (at 1KHz +25°C) Insulation Resistance Voltage Charge : 1 min at +25°C, ±5°C

9,000 or more, c≤0.33µf 5000S or more c>0.33µf Voltage Test 1.6 x Vr applied for 2sec +25°C, 5°C (Between Terminal) Endurance +85°C, ±2°C, 1.25 x Vr, 1000Hr Cap Change: < ±5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value Damp Heat +40°C±2°C, 93% ±2%, 21days Cap Change: < ±5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value Construction Non-inductive wound metallized polyester film Epoxy dipped encasement, Flame retardant to UL94V-0 Lead Material Color of Body Markings Solder coated or Tinned solid wire Orange/Brown Capacitance, Tolerance, Voltage When space permits, Capacitor Type will be marked -S pecial size or items on request. - Tolerance Dimension ±0.5 mm. Sharma Film Capacitors Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 MKTD05 SERIES

µF code 0.001 102 0.0012 122 0.0015 152 0.0018 182 0.0022 222 0.0027 272 0.0033 332 0.0039 392 0.0047 472 0.0056 562 0.0068 682 0.0082 822 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 50/63VDC Tmax Hmax Wmax P d 3.2 5.0 5.0 0.5 100VDC Tmax Hmax Wmax P d Sharma Film Capacitors Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

0.0027 272 0.0033 332 0.0039 392 0.0047 472 0.0056 562 0.0068 682 0.0082 822 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sharma Film Capacitors Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Capacitance µF code 0.0010 102 0.0012 122 0.0015 152 0.0018 182 0.0022 222 250VDC Tmax Hmax Wmax P d 400VDC Tmax Hmax Wmax P d 630VDC Tmax Hmax Wmax P d

Standard Packing Quantity For Box Centering of the lead wire P1 3.85 ±0.5 Centering of the body P2 6.35 ±1.3 Lead spacing F 5.0 ±0.8 Component alignment ∆h 0 ±2.0 Height from sprocket hole H1 20.0 ±0.5 Height H0 16.0 ±0.5 Center to the comp body L 11.0 ±0.5 Tape width W 18.0 +1.0-0.5 Width of adhesive tape W0 13.0 ±0.5 Sprocket hole alignment W1 9.0 ±0.5 Position of adhesive tape W2 3max Sprocket hole diameter D0 4.0 ±0.2 Tape thickness T 0.7 ±0.2 50-100V 250V 400V 102-104 values 2000PCS 102-183 values 2000PCS 102-822 values 2000PCS 124-182 values 1500PCS 223-333 values 1500PCS 103-153 values 1500PCS 224-474 values 1200PCS 393-473 values 1200PCS 183-273 values 1200PCS 564-824 values 1000PCS 563-823 values 1000PCS 333-393 values 1000PCS 105-125 values 800PCS 104-224 values 800PCS 474-563 values 800PCS Sharma Film Capacitors Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Description Symbol Dimensions (mm) Lead Spacing 5mm Toll Lead wire diameter Фd 0.3 ±0.05 Taping pitch P 12.7 ±0.1 Sprocket hole pitch P0 12.7 ±0.2 Taping Specifications For Automatic Insertion Taping Specifications For Automatic Insertion

• Metallized polyester film, epoxy resin coating - Large C-values in small dimensions - Excellent self-healing properly and high reliability Specifications Operating Temperature -40+85°C Rated Voltage DC 250V, 400V, 630V Capacitance Range 0.01 to 6.8 Mf d Capacitance Tolerance ±5%, ±10% Dissipation Factor <0.01 (At 1KHz) Insulation Resistance Cr≤0.33µF:≥7,500Mohm, Ur >100V Cr>0.33µF: >25,000Mohm·µF, Ur >100V Voltage Test 1.4 U r (Is) -S pecial size or items on request. - Tolerance Dimension ±1.0 mm. VDC Mfd 0.01 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 250VDC W T H P 12 6 8.5 10 12 6 8.5 10 12 6 8.5 10 12 6 9.5 10 12 6 9.5 10 12 6 9.5 10 12 6 9.5 10 12 6 9.5 10 12 6 9.5 10 12 6 9.5 10 12 6 9.5 10 12 6 9.5 10 400VDC W T H P 11.5 5 8 10.5 11.5 5 8 10.5 11.5 5 8 10.5 12 5 9 10.5 12 5 9 10.5 12 5 9 10.5 12 5 9 10.5 12 5 9 10.5 12.5 5 9 10.5 12.5 5 9 10.5 12.5 5 9 10.5 12.5 6 10.5 10.5 630VDC W T H P 12 5 8.5 10 12 5 8.5 10 12 5 8.5 10 13 6 9.5 10.5 13 6 9.5 10.5 13 6 10 15.5 13 6 10 15.5 17.5 6 10 15.5 17.5 6 10 15.5 17.5 6 10 15.5 17.5 6 10.5 15.5 17.5 6 11 15.5 Sharma Film Capacitors Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

*All sizes for reference only * 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.50 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.5 2.7 6.8 13 6.5 10.5 10.5 13 7 10.5 10.5 13 7 10.5 10.5 13 7 10.5 10.5 17 7 10.5 15 17 7 10.5 15 17 7 11.5 15 17 7 11.5 15 18 7 11.5 15 18 7 13.5 15 18 7.5 13.5 15 23 7.5 13.5 20 23 7.5 13.5 20 23 8 14.5 20 24 8 14.5 20 28 8.5 16 25 28 8.5 18 25 28 9 18 25 32 10 18 30 17.5 6.5 9.5 15.5 17.5 5.5 9.5 15.5 17.5 5.5 9.5 15.5 17.5 5.5 9.5 15.5 19 7.5 12.5 16.0 19 7.5 9.5 20.5 19 7.5 15.5 16.0 22.5 5.5 11.5 20.5 23.5 6 11.5 20.5 23.5 8 12 25.5 23.5 8 12 25.5 23.5 8.5 18.5 20 28 8.5 18 20 28 9.5 18 25.5 28 9.5 18 25.5 30 10 19 28 30 10.5 19.5 28 30 10.5 19.5 28 30 10.5 19.5 28 17.5 8 13 15.5 17.5 8 13 15.5 23 8.5 14.5 20.5 23 8.5 14.5 20.5 23 8.5 14.5 20.5 23 8.5 14.5 20.5 23 9 15 20.5 23 9 15 25.5 23 9 15 25.5 28.5 9.5 18 25.5 28.5 9.5 18 25.5 28.5 10.5 19 25.5 28.5 10.5 19 25.5 28.5 13.5 22 25.5 28.5 13.5 22 25.5 30.5 13.5 22 28.5 30.5 13.5 22 28.5 30.5 13.5 22 28.5 30.5 13.5 22 28.5 Sharma Film Capacitors Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

Voltage Range µF Value 50 0.001-1.0 4 63 0.001-1.0 8 100 >0.0068 10 100 0.0033-0.0068 15 100 >0.0033 30 250 0.001-1.0 20 400 0.001-1.0 40 CASE Dimensions Millimeters (Inches) SIZE W H L a b TOLRANCE ON DIMENSIONS: ±0.2mm (.008") VOLTAGE V DC (Voltage Code) Capacitance 63 100 250 400 630 in µF (1J) (2A) (2E) (2G) (2J)

0.01 G H

0.015 G H

0.022 G H J

0.033 G H J

0.047 G H J

0.068 G H J

0.1 G H J

0.15 H J

0.22 H J

PULS E RISE TIME (dv/dt) - Volts per µSecond. CASE DIMENSIONS TABLE Ordering Information (EXAMPLE) M K T 0 0 S 2 G 4 7 3 K S Series Series Code: MKT 00S Voltage Code Voltage Code 1J 2A 2E 2G 2J DC Voltage 63V 100V 250V 400V 630V Capacitance First Two Digits Represent Significant Figures of Capacitance in Picofarads. Third Digit Indicates Number of Zeros Tolerance Capacitance Tolerance Code: Capacitance Tolerance ± 20% ± 10% ±5% Code M K J Packing Method Code Packing Code O T S Method Bulk Tape Stick Case Sizes G,H,J G H, J Example at right indicates: MKT 00S Series, 400 V DC, 0.047 µF, 10%, Stick Magazine packing INTRODUCTION The MKT00S Series Metallized Polyester Film Capacitors are miniature capacitors specially developed for Surface Mount Technology. This series covers a wide range of values and voltages in three convenient case sizes and have excellent electrical characteristics. The MKT00S series has fire retardant epoxy molded encapsulation which also provide high insulation resistance.

• Ultra miniature size
• Wide value and voltage range in just three case sizes
• Flame retardant epoxy encapsulation
• Consistent dimensions and surface finish due to molded construction
• Compatible with all popular high speed assembly machines
• Available in Carrier Tape, Stick and Bulk packing
• Self healing capability
• Compatible with all standard standard SMT soldering methods GENERAL SPECIFICATIONS: Dissipation factor:0.0070 max at 1 K Hz Insulation resistance:>15,000 M Ohms at a temperature of 25 ± 5 °C, when measured at: 10 ±1 V DC for 63V DC rated capacitors, 100 ±15 V DC for 100 to 400V DC rating and, 500 ±50 V DC for 630V DC rating. Capacitance tolerance:±10%(K). ±5%(J) available on request Voltage Test :1.5 times the rated voltage applied between terminals for 2 sec- onds.at a temperature of 25 ± 5 °C Temperature range:-40 to 105 °C with derating above 85 °C. Climatic category:F M E LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. DIMENSIONS AND TOLERANCES: "d" - 0.5 - 0.6 mm (0.020" - 0.024") for dimension "T" < 3.5mm (0.138") "d" - 0.6 mm (0.024") for dimension "T" > 3.5mm (0.138") "LL'' - 4.0 +1.5mm (0.16 + 0.06") for bulk supply MKT 00 S SERIES FFoorrmmeerrllyy SSMMXX sseerriieess Sharma Film Capacitors

MKT 00S Packaging Specification DIMENSION A B C DIMENSION 40 40 550 to in MILLIMETERS min min 1200 DIMENSION 1.575 1.575 21.65 to in INCHES min min 47.24 CASE QUANTITY PER PACK SIZE TAPE STICK BULK G 500 NA 100 H NA 60 100 J NA 50 100 DIMENSION A a B b DIMENSION 10.5 9.1 9.5 6.3 in MILLIMETERS ±0.2 ±0.2 ±0.2 ±0.2 DIMENSION 0.413 0.358 0.374 0.248 in INCHES ±0.008 ±0.008 ±0.008 ±0.008 DIMENSION C D L DIMENSION 5 2.5 670 in MILLIMETERS ±0.2 ±0.2 ±2.0 DIMENSION 0.197 0.098 26.378 in INCHES ±0.008 ±0.008 ±0.080 DIMENSION A B W F E P1 DIMENSION 5.6 7.6 12 5.5 1.75 8 DIMENSION P2 P0 D0 T T2 DIMENSION 2 4 1.5 0.3 4.2 PEEL-OFF TAPE DIMENSIONS STICK MAGAZINE DIMENSIONS STANDARD PACKING QUANTITY LEADER SPECIFICATIONS REEL DIMENSIONS (500 pcs/Reel) A B C D E W t A B C D E W t Dimensions in Millimeters Dimensions in Inches Sharma Film Capacitors

The MKTR Series Round Axial Metallized Polyester Film Capacitors cover a wide range of values and voltages. These capacitors also have good high frequency characteristics and are suitable for applications such as Blocking, By-passing, Coupling and all General Purpose applications.

• Wide value and Voltage range
• Tape wrapped axial construction for different typed of mounting
• Reduced dimensions due to taped wrapped encapsulation
• Self healing capability
• Available in tape and reel form for automatic insertion (please check with us about availability of specific values)
• Close tolerance ±1% and ±2% available on request GENERAL SPECIFICATIONS Dissipation factor:≤ 0.0100 at 1 K Hz Insulation resistance:For 100 VDC rated parts; ‡ 9,000 M Ohms for C ≤ 0.33 µF, ‡ 3,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C. For 250 to 630 VDC rated parts; ‡ 15,000 M Ohms for C≤ 0.33 µF, ‡ 5,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C. Capacitance tolerance:±5%(J), ±10%(K) and ±20%(M). Voltage Test :1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 ± 5 °C. Temperature range:-40 to 85 °C with derating above 85 °C. Climatic category:G P D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:; 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits 3. Insulation Resistance shall be above 30% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. DIMENSIONS AND TOLERANCES "d" = 0.6 mm (0.024") For D≤6.0 mm "d" = 0.8 mm (0.032") For D>6.0 mm RATED dv / dt rating VOLTAGE in volts / µ seconds 100 1 160 2 250 3 400 5 630 7 1000 10 PULSE RISE TIME (dv/dt) Volts per µsec. MKT R SERIES FFoorrmmeerrllyy MMPPRR sseerriieess VOLTAGE DC 100 160 250 400 630 VOLTAGE AC 63 90 160 200 220 Dimensions Dimensions Dimensions Dimensions Dimensions Capacitance in MM in MM in MM in MM in MM in uF D L D L D L D L D L 0.033 5 10.5 5 10.5 5 10.5 6 14 7 19 0.15 5.5 14 6 14 7 19 8.5 19 10.5 27 0.33 5.5 14 7.5 14 8 19 10 27 11.5 32 2.2 9.5 27 11 27 14 32 20.5 32 23 47 3.3 11 27 13 27 16 32 20.5 47 28 47 4.7 12.5 27 14 32 18.5 32 23 47 6.8 14 32 17 32 21.5 47 27 47 VOLTAGE DC 100 160 250 400 630 VOLTAGE AC 63 90 160 200 220 Dimensions Dimensions Dimensions Dimensions Dimensions Capacitance in Inches in Inches in Inches in Inches in Inches in uF D L D L D L D L D L Case Dimensions in Millimeters: 100V • 160V • 250V • 400V • 630V Case Dimensions in Inches: 100V • 160V • 250V • 400V • 630V D max. d L max .1.4" max 1.4" max Sharma Film Capacitors

VOLTAGE (DC) 100 V DC 250 V DC 400 V DC 630 V DC VOLTAGE (AC) 63 V AC 160 V AC 200 V AC 220 V AC Dimensions Dimensions Dimensions Dimensions Capacitance in Millimeters in Millimeters in Millimeters in Millimeters in µF L H T L H T L H T L H T 0.01 14.0 7.0 4.5 0.015 14.0 7.5 5.0 0.022 14.0 8.0 6.0 0.033 19.0 10.0 5.0 0.047 19.0 10.0 5.0 0.068 19.0 11.0 6.0 VOLTAGE (DC) 100 V DC 250 V DC 400 V DC 630 V DC VOLTAGE (AC) 63 V AC 160 V AC 200 V AC 220 V AC Dimensions Dimensions Dimensions Dimensions Capacitance in Inches in Inches in Inches in Inches in µF L H T L H T L H T L H T 0.01 0.551 0.276 0.177 0.015 0.551 0.295 0.197 0.022 0.551 0.315 0.236 0.033 0.748 0.394 0.197 0.047 0.748 0.394 0.197 0.068 0.748 0.433 0.236 Case Dimensions in Millimeters: 100V • 250V • 400V • 630V Case Dimensions in Inches: 100V • 250V • 400V • 630V INTRODUCTION The MKTO Series Flat Axial Metallized Polyester Film Capacitors cover a wide range of values and voltages. These capacitors also have good high frequency characteristics and are suitable for; Blocking, By-passing, Coupling and all General Purpose applications. This series is specifically designed for mounting in locations where height is critical or where different mounting options are required. FEATURES:

• Wide value and Voltage range
• Flat axial construction for different types of mounting
• Reduced dimensions due to tape wrapped encapsulation
• Self healing capability GENERAL SPECIFICATIONS Dissipation factor:≤ 0.0100 at 1 K Hz. Insulation resistance:For 100 VDC rated parts;‡ 9,000 M Ohms for C≤ 0.33 µF, ‡ 3,000 seconds for C> 0.33 µF DIMENSIONS AND TOLERANCES RATED dv / dt rating VOLTAGE in volts / µ seconds 100 1 160 2 250 3 400 5 630 7 1000 10 PULSE RISE TIME (dv/dt) Volts per µsec. (1.4“ min.) MK TO SERIES FFoorrmmeerrllyy MMPPOO sseerriieess (1.4“ min.) at a temperature of 25 ± 5 °C. For 250 to 630 VDC rated parts; ‡ 15,000 M Ohms for C≤ 0.33 µF ‡ 5,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C. Capacitance tolerance:±5%(J), ±10%(K) and ±20%(M) Voltage Test: 1.6 times the rated voltage applied between terminals for 2 seconds. at a tempera- ture of 25 ± 5 °C Temperature range:-40 to 85 °C with derating above 85 °C. Climatic category:G P D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:; 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits 3.Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. Sharma Film Capacitors

INTRODUCTION: The MKTFS Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series provides alternative dimensions for the same values covered by the other MKTD series. These capacitors are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. FEATURES:

• Wide value and Voltage range
• Self healing capability
• Flame retardant powder epoxy encapsulation
• Minimum overall dimensions due to dip coated construction GENERAL SPECIFICATIONS: Dissipation factor:< 0.0100 at 1 K Hz for capacitance≤ 1.0 µF, < 0.0150 at 1 K Hz for capacitance> 1.0 µF. Insulation resistance:For 100 VDC rated parts; ‡ 9,000 M Ohms for C≤ 0.33 µF, ‡ 3,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C. For 250 to 630 VDC rated parts; ‡ 15,000 M Ohms for C ≤ 0.33 µF, ‡ 5,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C Capacitance tolerance:±5%(J) and ±10%(K). Voltage Test : 1.75 times the rated voltage applied between terminals for 5 seconds. at a temperature of 25 ± 5 °C. Temperature range: -40 to 85 °C. LEAD SPACING mm (inches) Rated 10.0 15.0 22.5 27.0 100 6 3 2 1 250 11 7 4 3 400 20 10 5.5 5 630 30 15 8 7 DIMENSIONS AND TOLERANCES: d - 0.7 mm z - 3 mm max. LL - 20.0 mm min. Tolerance on P ±1.5 mm PULSE RISE TIME (dv/dt) Volts per µsec. MKT F S SERIES VOLTAGE DC/AC Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC in µF Dimensions in Millimeters Dimensions in Millimeters L H T P L H T P 10 37.0 25.0 18.0 32.5 Case Dimensions in Millimeters 100V • 250V LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. VOLTAGE DC/AC Capacitance 400 V DC / 200 V AC 630 V DC / 220 V AC in µF Dimensions in Millimeters Dimensions in Millimeters L H T P L H T P Case Dimensions in Millimeters 400V • 630V Sharma Film Capacitors

SAFETY RECOGNIZED FILM CAPACITOR 1. Rated Interference Suppression "X2" Metallized Polypropylene Composite dielectric. UL 1414 (250V AC), CUL 1414/Canda (250V VAC) VDE KEMA SEV NEMKO DEMKO SEMKO FIMKO CHINA: DIN EN 132400 (1994) / IEC60382-14 (1993) AND IEC DRAFT 40 (SEC)677 2. Ideal for using in Line-By-Pass, Antenna Coupling, Across-The-Line and Spark killer circuits and available for EMI filter and switching power supply and radio-and monitor, television application. 3. Flame retardant plastic cases and epoxy resin. (compliance with 94V-0) 4. Self-healing properties. 5. Proven series wound construction. 6. Approved By : UL, CSA, VDE, KEMA, SEV, NEMKO, DEMKO, SEMKO, FIMKO, CHINA. SPECIFICATIONS : OPERATING TEMPERATURE -40 к to +100 к W max T RATED VOLTAGE 280VAC max CAPACITANCE RANGE 0.0022 ~ 4.7uF DIELECTRIC STRENGTH Applied 1500VDC for 1minute or 2100VDC for 1 second. CAPACITANCE TOLERANCE +-10% (K) H max Measured after a charging voltage 100 ±15VDC INSULATION RESISTANCE for 1 minute. 25 ±2.0 d O LESS THAN OR EQUAL TO 0.33PF Њ 30,000M: GREATER THAN 0.33PF Њ 10,000M:ΗPF DISSIPATION FACTOR 0.1% MAX. at 1KHz P±0.5 (Unit : mm) MAXIMUM PULSE RISE TIME 250 VAC: 120 V/microsecond. PF SIZE W H T P d O PF SIZE W H T P d O D imension Tolerance: +/- 0.5mm V DE CQC Sharma Film Capacitors Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327