MKT050 SHARMA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

T x H x L CARTON REEL PACK AMMO PACK 2.5 x 6.5 x 7.2 3000 2500 3500 3.0 x 6.5 x 7.2 3000 2100 2900 3.5 x 7.5 x 7.2 2000 1800 2500 4.5 x 9.5 x 7.2 1500 1400 1900 5.0 x 10.0 x 7.2 1000 1200 NA 6.0 x 11.0 x 7.2 2000 1000 NA 7.2 x 13.0 x 7.2 1500 800 NA Taping Dimensions for MKT 050 Series (5mm Pitch) DESCRIPTION DIMENSION TOLERANCES mm Inches mm Inches P Taping pitch 12.7 0.500 ±1 ±0.039 P0 Sprocket hole pitch 12.7 0.500 ±0.2 ±0.008 P1 Centering of lead wire 3.85 0.152 ±0.7 ±0.028 P2 Centering of the body 6.35 0.250 ±1.3 ±0.051 dS Component alignment 0 0.000 ±2 ±0.079 Center to component body or 18.5 or 0.728 W0 Width of adhesive tape 6 min. 0.236 min. W1 Sprocket hole alignment 9 0.354 ±0.5 ±0.020 D0 Position hole diameter 4 0.157 ±0.2 ±0.008 t Tape thickness 0.7 0.028 ±0.2 ±0.008 Packaging Specifications Bulk, Tape/Reel & Ammo Pack INTRODUCTION The MKT 050 Series Metallized Polyester Film Capacitors are miniature capacitors with 5 mm lead spacing. This series covers a wide range of values and voltages and exhibit excellent high frequency characteristics. In addition to specific applications such as Blocking, By- passing and Coupling, this series is widely used in all General Purpose applications.

FEATURES

  • Wide value and Voltage range
  • Ultra miniature size
  • Flame retardant case and potting
  • Consistent dimensions and surface finish due to molded case construction
  • Available in tape & reel form for automatic insertion
  • Self healing capability GENERAL SPECIFICATIONS: Dissipation factor:For capacitance ≤ 0.1 µF= 0.010 max at 1 KHz, 0.015 max at 10 KHz, 10 KHz. Insulation resistance:For nominal voltage < 100 V DC;‡10,000 M Ohms for C ≤ 0.10 µF, ‡1,000 seconds for C > 0.10 µF. For nominal voltage ≤ 100 V DC; ‡ 30,000 M Ohms for C ≤ 0.10 µF, ‡1,000 seconds for C> 0.10 µF at a temperature of 25 ± 5°C. Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M) Voltage Test:1.6 times the rated voltage applied between terminals for 2 seconds at a temperature of 25 ± 5 °C Temperature range: -55 to 100 °C with derating above 85 °C Climatic category: F M D DIMENSIONS AND TOLERANCES: "d"= 0.5 to 0.6mm (0.020 to 0.024") for dimension “T”≤ 3.5mm (0.138”) for dimension “T” >3.5mm (0.138”) "LL''= 4.0 +1.5mm (0.16 +0.06")for Bulk Supply MKT 05 0 SERIES FFoorrmmeerrllyy MMKKTT 11..8855 sseerriieess RATED Capacitance dv/dt VOLTAGE RangeµF value 50 0.001-1.0 4 63 0.001-1.0 8 100 >0.0068 10 100 0.0033-0.0068 15 100 >0.0033 30 250 0.001-1.0 20 400 0.001-1.0 40 PULSE RISE TIME (dv/dt) Volts per µsec. LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. Sharma Film Capacitors formerly SAHA TEL:(949)642-SECI SECI Engineers & Buyers' Guide FAX:(949)642-7327

MKT 05 0 SERIES CAS E DIMENSIONS Voltage 50 V DC / 30 V AC 63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC Cap Value Dimensions in MM Dimensions in MM Dimensions in MM DIMENSIONS IN MM DIMENSIONS IN MM in µF L H T S L H T S L H T S L H T S L H T S Voltage 50 V DC / 30 V AC 63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC Cap Value Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches in µF L H T S L H T S L H T S L H T S L H T S Case Dimensions in Millimeters 50V • 63V • 100V • 250V • 400V Case Dimensions in Inches 50V • 63V • 100V • 250V • 400V Sharma Film Capacitors formerly SAHA TEL:(949)642-SECI SECI Engineers & Buyers' Guide FAX:(949)642-7327