MKC1862-522-G

MKC1862 VISHAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 3

Technical content

www.vishay.com 101 MKC 1862* Vishay Roederstein Document Number 26027 Revision 01-Dec-03 For technical questions, contact dc-film@vishay.com Please note: these capacitors are not recommended for new designs MarkingW Max. 6.0-1 ± 0.4 H Max. L Max. pcm ± 0.4 0.8 0.6 Metallized Polycarbonate Film Capacitor Related Document: IEC 60 384-6 MAIN APPLICATIONS: Storage, filter, timing and integrating circuits. MARKING: Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture DIELECTRIC: Polycarbonate film ELECTRODES: Vacuum deposited aluminum COATING: Flame retardant plastic case (UL-class 94 V-0), red, epoxy resin sealed CONSTRUCTION: Extended metallized film (refer to general information) LEADS: Tinned wire IEC TEST CLASSIFICATION: 55/100/56, according to IEC 60068 OPERATING TEMPERATURE RANGE: - 55°C to + 100°C CAPACITANCE RANGE: 0.01µF to 10µF CAPACITANCE TOLERANCES: RATED VOLTAGES (UR):

63 VDC, 100 VDC, 250 VDC, 400 VDC

PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz:

40 VAC, 63 VAC, 160 VAC, 200 VAC

TEST VOLTAGE (ELECTRODE/ELECTRODE): 1.6 x UR for 2 s INSULATION RESISTANCE: Measured at 100 VDC (63 VDC series measured at

50 VDC) after one minute

For C ≤ 0.33µF and UR > 100 VDC: 30,000 MΩ minimum value (100,000 M Ω typical value) For C ≤ 0.33µF and UR ≤ 100 VDC: 15,000 MΩ minimum value (50,000 M Ω typical value) TIME CONSTANT: Measured at 100 VDC (63 VDC series measured at For C > 0.33µF and UR > 100 VDC: 10,000 s minimum value (40,000 s typical value) For C > 0.33µF and UR ≤ 100 VDC: 5000 s minimum value (15,000 s typical value) CAPACITANCE DRIFT: Up to + 40°C, ± 1% for a period of two years DERATING FOR DC AND AC. CATEGORY VOLTAGE UC: At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.8 UR SELF INDUCTANCE: ~ 6 nH measured with 2mm long leads PULL TEST ON LEADS: ≥ 30 N in direction of leads according to IEC 60068-2-21 BEND TEST ON LEADS: 2 bends through 90° with half of the force used in pull test RELIABILITY: Operational life > 300,000 h Failure rate < 1 FIT (40°C and 0.5 x UR) For further details, please refer to the general information provided in this catalog. MAXIMUM PULSE RISE TIME PCM (mm) 63 VDC 100 VDC 250 VDC 400 VDC 10 17 23 38 61 15 9 13 21 33 22.5 6 8 13 20 27.5 5 6 10 16 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. Maximum pulse rise time dv/dt [V/µs] Dimensions in mm

www.vishay.com 102 MKC 1862* Vishay Roederstein Document Number 26027 Revision 01-Dec-03 For technical questions, contact dc-film@vishay.com Please note: these capacitors are not recommended for new designs Further C-values upon request CAPACI- CAPACI- VOLTAGE VOLTAGE VOLTAGE VOLTAGE TANCE TANCE CODE 06 CODE 01 CODE 25 CODE 40 CODE 63 VDC/ 100 VDC/ 250 VDC/ 400 VDC/

40 VAC 63 VAC 160 VAC 200 VAC

W H L PCM W H L PCM W H L PCM W H L PCM RECOMMENDED PACKAGING LETTER TYPE OF HEIGHT REEL ORDERING PCM PCM PCM CODE P ACKAGING (H) DIAMETER CODE 10 15 22.5 - 27.5 (mm) (mm) EXAMPLES D AMMO 16.5 S* MKC 1862-310/405-D X X — G AMMO 18.5 S* MKC 1862-310/405-G X X — F REEL 16.5 350 MKC 1862-310/405-F X X — W REEL 18.5 350 MKC 1862-310/405-W X X — V REEL 18.5 500 MKC 1862-522/255-V — X X G AMMO 18.5 L* MKC 1862-522/255-G — — X — BULK — — MKC 1862-522/255 X X X *S - box size 55 x 210 x 340mm (W x H x L) *L - box size 60 x 360 x 510mm (W x H x L) DISSIPATION FACTOR TAN MEASURED AT C ≤ 0.1µF 0.1 µF < C ≤ 1.0µF C > 1.0 µF 1kHz 3 x 10 -3 3 x 10-3 3 x 10-3 10kHz 4 x 10 -3 4 x 10-3 — 100kHz 10 x 10 -3 —— Maximum values δδδδδ Metallized Polycarbonate, Related Document: IEC 60 384-6

www.vishay.com 103 MKC 1862* Vishay Roederstein Document Number 26027 Revision 01-Dec-03 For technical questions, contact dc-film@vishay.com Please note: these capacitors are not recommended for new designs Permissible AC Voltage versus Frequency f [Hz] V RMS 1000 100 0.022 0.047 0.1 0.221.0 0.472.2 102 23 5 7 1 0 3 235 7 1 0 4 23 5 7 1 0 5

250 VDC

Permissible AC Voltage versus Frequency f [Hz] V RMS 1000 100 102 23 5 7 1 0 3 235 7 1 0 4 23 5 7 1 0 5 0.22 0.01 0.022 0.033 0.068 0.1 0.330.681.0

400 VDC

Permissible AC Voltage versus Frequency f [Hz] V RMS 100 0.22 0.47 1.0 2.2 4.7 10.0

63 VDC

102 23 5 7 1 0 3 235 7 1 0 4 23 5 7 1 0 5 Permissible AC Voltage versus Frequency f [Hz] V RMS 100 0.47 2.2 10.0 6.8 3.3 1.5 0.68 0.33 0.15 0.068 102 23 5 7 1 0 3 235 7 1 0 4 23 5 7 1 0 5

100 VDC

0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 Metallized Polycarbonate, Related Document: IEC 60384-6 Capacitance in µF Capacitance in µF Capacitance in µFCapacitance in µF Impedance versus Frequency Z = f (f) (Lead length 2.0mm) 1.0 0.1 0.01 0.001 MHz Z [ 10µF 4.7µF 2.2µF 1.0µF 0.47µF 0.22µF 1µF 0.047µF 0.022µF 0.01µF