MKC03-48D12

MKC03-12S33 P-DUKE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Page 1 of 3 Issued Date：2008/05/21 OUTPUT SPECIFICATIONS Output power 3 Watts, max. Voltage accuracy Full load and nominal Vin ± 1% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% Load regulation No Load to Full Load Single Dual DS ± 0.2% ± 1% ± 1% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ±0.02% / ºC, max. Transient response recovery time 25% load step change 200μS Over load protection % of FL at nominal input 180%, typ. Short circuit protection Continuous, automatics recovery GENERRALINPUT SPECIFICATIONS Efficiency See table Isolation voltage Input to Output to Case DS type, Output to Output 500VDC, min. 500VDC, min. Isolation resistance 109ohms, min. Isolation capacitance 300pF, max. Switching frequency 300KHz, typ. Approvals and standard IEC60950-1, UL60950-1, EN60950-1 Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) Dimensions 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) Weight DIP SMD 16g (0.55oz) 18g (0.62oz) MTBF (Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 3.069 x 10 hrs 2.003 x 10 hrs INPUT SPECIFICATIONS Input voltage range 12V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Pi type Input surge voltage 100mS max 12V input 24V input 48V input 36VDC 50VDC 100VDC Input reflected ripple current Nominal Vin and full load 20mAp-p Start up time Nominal Vin and constant resistive load Power up 350mS,max. ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature Standard M1 (Note 6) -25ºC ~ +85ºC (with derating) -40ºC ~ +85ºC (non-derating) Maximum case temperature 100ºC Storage temperature range -55ºC ~ +105ºC Thermal impedance Nature convection 20ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI EN55022 Class A ESD EN61000-4-2 Air Contact ± 8KV ± 6KV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 7) EN61000-4-4 ± 2KV Perf. Criteria B Surge (Note 7) EN61000-4-5 ± 1KV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted

FEATURES

• 3 WATTS REGULATED OUTPUT POWER
• OUTPUT CURRENT UP TO 0.5A
• STANDARD 1.25 X 0.80 X 0.40 INCH
• HIGH EFFICIENCY UP TO 80%
• 2:1 WIDE INPUT VOLTAGE RANGE
• FIVE-SIDED SHIELD
• FIXED SWITCHING FREQUENCY (300KHz)
• STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
• OVER CURRENT PROTECTION
• OUTPUT 1 / OUTPUT 2 ISOLATION (DS TYPE)
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS SMD TYPE, M1 TYPE

DESCRIPTION

The MKC03 series offer 3 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 82ºC ambient temperature. MKC03 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC.

APPLICATIONS

Page 2 of 3 Issued Date：2008/05/21 Output Current Input Current Model Number Input Range Output Voltage Min. load Full load Output (4) Ripple & Noise No load(3) Full load(2) Eff (4) (%) Capacitor(5) Load max MKC03-12S33 9 – 18 VDC 3.3 VDC 0mA 500mA 50mVp-p 8mA 196mA 74 2200μF MKC03-12S05 9 – 18 VDC 5 VDC 0mA 500mA 50mVp-p 10mA 286mA 77 1000 μF MKC03-12S12 9 – 18 VDC 12 VDC 0mA 250mA 50mVp-p 13mA 333mA 79 220μF MKC03-12S15 9 – 18 VDC 15 VDC 0mA 200mA 50mVp-p 13mA 329mA 80 150 μF MKC03-12D05 9 – 18 VDC ± 5 VDC 0mA ± 250mA 50mVp-p 13mA 293mA 75 ± 470μF MKC03-12D12 9 – 18 VDC ± 12 VDC 0mA ± 125mA 50mVp-p 16mA 329mA 80 ± 100 μF MKC03-12D15 9 – 18 VDC ± 15 VDC 0mA ± 100mA 50mVp-p 16mA 329mA 80 ± 68μF MKC03-12DS05 9 – 18 VDC V1:5 VDC;V2:5 VDC 0mA V1: 250mA;V2:250mA 50mVp-p 18mA 293mA 75 V1:470μF;V2:470μF MKC03-12DS12 9 – 18 VDC V1:12 VDC;V2:12 VDC 0mA V1:125mA;V2:125mA 50mVp-p 18mA 329mA 80 V1:100μF;V2:100μF MKC03-12DS15 9 – 18 VDC V1:15 VDC;V2:15 VDC 0mA V1: 100mA;V2:100mA 50mVp-p 18mA 329mA 80 V1:68μF;V2:68μF MKC03-24S33 18 – 36 VDC 3.3 VDC 0mA 500mA 50mVp-p 12mA 101mA 72 2200μF MKC03-24S05 18 – 36 VDC 5 VDC 0mA 500mA 50mVp-p 12mA 149mA 74 1000 μF MKC03-24S12 18 – 36 VDC 12 VDC 0mA 250mA 50mVp-p 16mA 169mA 78 220μF MKC03-24S15 18 – 36 VDC 15 VDC 0mA 200mA 50mVp-p 16mA 169mA 78 150 μF MKC03-24D05 18 – 36 VDC ± 5 VDC 0mA ± 250mA 50mVp-p 18mA 147mA 75 ± 470μF MKC03-24D12 18 – 36 VDC ± 12 VDC 0mA ± 125mA 50mVp-p 18mA 169mA 78 ± 100 μF MKC03-24D15 18 – 36 VDC ± 15 VDC 0mA ± 100mA 50mVp-p 18mA 169mA 78 ± 68μF MKC03-24DS05 18 – 36 VDC V1:5 VDC;V2:5 VDC 0mA V1: 250mA;V2:250mA 50mVp-p 16mA 147mA 75 V1:470μF;V2:470μF MKC03-24DS12 18 – 36 VDC V1:12 VDC;V2:12 VDC 0mA V1:125mA;V2:125mA 50mVp-p 20mA 169mA 78 V1:100μF;V2:100μF MKC03-24DS15 18 – 36 VDC V1:15 VDC;V2:15 VDC 0mA V1: 100mA;V2:100mA 50mVp-p 20mA 169mA 78 V1:68μF;V2:68μF MKC03-48S33 36 – 75 VDC 3.3 VDC 0mA 500mA 50mVp-p 8mA 48mA 76 2200μF MKC03-48S05 36 – 75 VDC 5 VDC 0mA 500mA 50mVp-p 10mA 75mA 74 1000 μF MKC03-48S12 36 – 75 VDC 12 VDC 0mA 250mA 50mVp-p 10mA 84mA 79 220μF MKC03-48S15 36 – 75 VDC 15 VDC 0mA 200mA 50mVp-p 10mA 84mA 79 150 μF MKC03-48D05 36 – 75 VDC ± 5 VDC 0mA ± 250mA 50mVp-p 10mA 75mA 74 ± 470μF MKC03-48D12 36 – 75 VDC ± 12 VDC 0mA ± 125mA 50mVp-p 12mA 86mA 77 ± 100 μF MKC03-48D15 36 – 75 VDC ± 15 VDC 0mA ± 100mA 50mVp-p 12mA 86mA 77 ± 68μF MKC03-48DS05 36 – 75 VDC V1:5 VDC;V2:5 VDC 0mA V1: 250mA;V2:250mA 50mVp-p 18mA 75mA 74 V1:470μF;V2:470μF MKC03-48DS12 36 – 75 VDC V1:12 VDC;V2:12 VDC 0mA V1:125mA;V2:125mA 50mVp-p 18mA 86mA 77 V1:100μF;V2:100μF MKC03-48DS15 36 – 75 VDC V1:15 VDC;V2:15 VDC 0mA V1: 100mA;V2:100mA 50mVp-p 18mA 86mA 77 V1:68μF;V2:68μF Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Maximum value at nominal input voltage and full load of standard type. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard. 7. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ.

Page 3 of 3 Issued Date：2008/05/21 SMD PIN CONNECTION PIN SINGLE DUAL 1 + INPUT + INPUT

2 NC -O U T P U T

3 NC COMMON

23 NC -O U T P U T

22 NC COMMON

11 +OUTPUT +OUTPUT 14 +OUTPUT +OUTPUT PIN SINGLE DUAL 12 -I N P U T - INPUT 13 - INPUT - INPUT Others NC NC Others NC NC DS + INPUT - V1 out + V1 out - V2 out + V2 out -I N P U T NC + INPUT - V1 out + V1 out - V2 out + V2 out DS - INPUT NC DIP PIN CONNECTION PIN SINGLE DUAL 1 + INPUT + INPUT

2 NC - OUTPUT

23 NC - OUTPUT

11 +OUTPUT +OUTPUT 14 +OUTPUT +OUTPUT PIN SINGLE DUAL 12 - INPUT - INPUT 13 - INPUT - INPUT DS + INPUT - V1 out + V1 out - V2 out + V2 out - INPUT + INPUT - V1 out + V1 out - V2 out + V2 out DS - INPUT 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) 0.01 x 0.02 (0.25 x 0.50) Rectangular Pin 22 3 1.25 (31.8) 0.600(15.24) 0.80(20.3) 0.40 (10.2) 0.15 (3.8) 0.900 (22.86) 0.100(2.54) 0.08(2.0) Suffix-SMD 1.00(25.4) 0.92(23.4) 0.44(11.2) 0.43(10.9) 0.100(2.54) 1.26 (32.0) 0.80(20.3) 0.02(0.5) BOTTOM VIEW Pin Area 0.04 x 0.02 (1.0 x 0.5)