MIQ2XMS-1 SPECTRUM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
LO (GHz) 1.4-2.8 1.4-1.7 1.7-2.8 1.4-2.8 1.4-2.8 1.4-2.8 1.4-2.8 1.4-2.8 1.4-2.8 1.4-2.8 RF (GHz) 1.4-2.8 1.4-1.7 1.7-2.8 1.4-2.8 1.4-2.8 1.4-2.8 1.4-2.8 1.4-2.8 1.4-2.8 IF (MHz) DC-500 DC-500 DC-500 DC-500 DC-500 DC-500 DC-500 DC-500 DC-500 Min 18 dB 20 dB 34 dB 20 dB Typical 6.0 dB 22 dB 30 dB 0.2 dB 3 deg 42 dB 40 dB 30 dB 45 dB +6 dBm +9 dBm +13 dBm +14 dBm +17 dBm +21 dBm +10 dBm +13 dBm +17 dBm Max 8.0 dB MIQ24 MIQ26 MIQ27 MIQ24 MIQ26 MIQ27 MIQ24 MIQ26 MIQ27 Conditions Electrical Specifications (1): Parameter SSB Conversion loss:(2) (3) Image Rejection Side- band Suppression:(4) Amplitude Match Phase Match Isolation LO to RF: LO to I/Q: RF to I/Q: I/Q to RF: Input 1 dB Compression Point: Input Third Order Intercept Point: LO Power: (5) Model MIQ2xMS-1 RF 1.4 to 2.8 GHz Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 4. Measured with an IF quadrature hybrid whose amplitude and phase errors are 0.5 dB and 3 degrees maximum. An IF quadrature hybrid is not included. 5. Usable LO drives are up to 2 dB below to 3 dB above nominal. 6. See Application notes M112, for aid in selecting the outline and for mounting and installation information. Typical Performance at 25˚C LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm All dimensions are in inches and [mm]. Outline: MSQ6 MIQ2xMS-1 Model MIQ2xMS-1Specifications Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-753 2 Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 www.SpectrumMicrowave.com