MIP2K4 AGELECTRONICA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Comparison data of conduction noise Featuring built-in frequency jitter necessary for EMI, while also conserving power during standby! High-Performance IPD for Battery Chargers MIP2Kx Series Overview MIP2Kx series is a high-performance IPD designed for 15W battery chargers and featuring built-in frequency jitter function at PWM control. It features built-in protection circuits necessary for compact power source charger circuitry. This allows a significant reduction in externally connected parts. It provides PWM control when a normal load is applied and intermittent control with low load. This results in greater efficiency for very low to maximum loads, while also conserving power during standby. DIP7-A1 Unit : mm Feature
- Built-in jitter function
- Built-in charge protection circuit Built-in overheating, load shorting and overvoltage protection circuits
Applications
Chargers (for DSC, etc.), AC adapter New publication, effective from 1 Oct. 2008 M00852BE Lineup MIP2K4（with jitter function） Decentralized pulse by jitter function → Lower the avarage × Average Peak MIP2F4（without jitter function） Source8 Source7 Drain5 V CC CL3 FB2 V DD Pin NamePin No. 5Ω1.0AUp to 13WMIP2K5 7Ω0.70AUp to 10WMIP2K4 10Ω0.50AUp to 8WMIP2K3 260Hz5.5kHz100kHz 16.5Ω0.35A 700V Up to 5WMIP2K2 fM∆ffoscR(DS)ONILIMITVDSS Characteristic Output Type No. *1 The electric power mentioned above depends on the transformer specification and ambient conditions. The information should be used only as a guide. When using it within a case, output electric power may be decided by heat of IPD. *2 All characteristic values are only for reference (still under development).
Electric characteristics (MIP2K4：Worldwide input, 8.3V/1.5A output) For power supply
- European and American companies
- Local Asian companies
- Other local companies
- Domestic Japanese companies
- Japanese companies in Asia (50% or more owned) MIP2K□□ ApplicationDisable to supplyAble to supplyParts No. VI characteristics of adapter circuit Power efficiency Vo vs Io 0123 Io [A] Vo [V] 100V 240V η vs Po 100 02468 1 0 1 2 Po [W] η [％] 100V 240V Adapter circuit sample (MIP2K4) By frequency jitter function, frequency jitter variation(∆f) changes periodically, by frequency of frequency jitter modulation factor (fM) as shown below. fosc=100kHz typ, ∆f=5.5kHz typ, fM=260Hz typ 1/fM=1/260Hz ∆f=5.5kHz fosc=100kHz (average value of frequency) Time Frequency Drain current 105.5kHz 94.5kHz Frequency: High Frequency: Low *All values are typical