MIL-C-26482

MIL-C-26482 ITT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

www.ittcannon.com 157 Dimensions are shown in inches (millimeters). Dimensions subject to change. MIL-C-26482, Series 2 Connectors PV Military Specification Cross Reference PV7 and MIL-C-26482 (Series 2) Replacement for MIL-C-26482 (Series 1) MS3110,MS3120 MS3111,MS3121 MS3112,MS3122 MS3114,MS3124 MS3116,MS3126 MS3470 MS3471 MS3470 MS3474 MS3476 MS3472 MS3475 PV70 PV71 PV70 PV74 PV76 PV72 PV75 /13 /43 /13 /12 /14 /42 Narrow Flange Receptacle Cable Connecting Receptacle Narrow Flange Receptacle Jam Nut Receptacle Straight Plug Wide Flange Receptacle Straight Plug, RFI Shielded Narrow Flange Receptacle Wide Flange Receptacle Jam Nut Receptacle Straight Plug /14 MS3470 MS3472 MS3474 MS3476 NAS1650,NAS1699 NAS1651,NAS1700 NAS1652,NAS1701 NAS1653,NAS1702 *NOTE: M83723 series has been superseded by MIL-C-26482 Series 2. MIL-C-26482 Socket Pin NAS1599 MIL-C-83723* Slash Sheet ITT Cannon Prefix Commercial DesignMS Standards Description

• Intermatable with MIL-C-26482 Series I
• Operating termperature - 55˚C to + 200˚C The PV connector is designed to meet the rugged requirements of MIL-C-26482, Series 2/MIL-C-83723 Series I*, the specification which delineates the critical requirements of space-age applications. PV connectors have been used extensively on major aerospace programs requiring general-purpose, miniature cylindrical bayonet coupling connectors such as Space Shuttle, Apollo, ATM, OWS Min- uteman, Skylab, Thor-Delta, Titan IIIC, and Viking. The PV series is an important member of the Universal Interconnect System (UIS) - the only system that can perform all interconnection mis- sions. This system is adaptable for use with connec- tors of all shapes and sizes, including circular and rectangular configurations. standard, miniature and subminiature sizes. UIS is a rear servicing system that evolved from the LITTLE CAESAR® rear re- lease contact retention assembly, pioneered and developed by ITT Cannon. Since this time, ITT Cannon, and its licensees, have supplied to industry over 250 million interconnections utilizing this system. PV7 connectors are available under numerous in- dustrial specifications, some of which are listed below:
• CS512089 Jet Propulsion Laboratory
• 40M39569 NASA, George C. Marshall Space Flight Center
• 81D52 Martin Marietta, Denver Division
• MG414-0365 Rockwell International Space Division
• AC414-0013 Rockwell International Autonetics Division
• STS0003 McDonnell Douglas Astronautics This connector series is manufactured to accommo- date the following backshells: M85049/31 (MS3416), M85049/51 (MS3418) and M85049/ 52 (MS3417). Backshells are not included with connector and must be ordered separately. Back- shells on page 161 are Non-MS type. Universal Insertion / Extraction Tool Style - A single,expendable plastic tool is used for insertion and extraction of both pins and sockets. Simple, Strong Contact Design - One basic config- uration eliminates undercuts and maximizes bend re- sistance for positive contact mating. Closed-Entry Socket Insert - Hard dielectric socket face of mating connector has lead-in chamfers for positive alignment of pins and sockets. Interfacial Pin Insert Seal - Universal interconnect permits design of raised moisture barriers around each pin which mate into lead-in chambers of hard face sockets insert for individual contact sealing. Interfacial sealing is never touched by service tools. Superior Contact Stability - Rear Contact Release System (LITTLE CAESAR contact assembly) features a stamped metal retaining clip captivated by molded-in shoulders of each contact cavity in the insulator. A rear-inserted plastic tool expands the tines beyond the contact shoulder, releasing the contact. Polarized Backshells - Interlocking teeth on the front of the backshell and rear portion of the shell allow endbells to be positioned as desired, eliminating chaf- ing of wire during assembly. 4 1

www.ittcannon.com 158 Dimensions are shown in inches (millimeters). Dimensions subject to change. MIL-C-26482, Series 2 Connectors PV How to Order Performance and Material Specifications ELECTRICAL MATERIALS AND FINISHES

Description

Shell Aluminum alloy per QQ-A-367, QQ-A-591 or QQ-A-225 Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab cadmium over nickel Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab cadmium over nickel Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab cadmium over nickel Insulators Rigid dielectric Silicone rubber (ITT Cannon blend) or Fluorosiclicone rubber (ITT Cannon blen) Copper alloy Aluminum alloy per QQ-A-591 Aluminum alloy per QQ-A-225 None None None Gold page per MIL-G-45204 Elastomers (grommets, interfacial and O ring seals) Contacts Coupling Nut Jam Nut (on PV74) .097 (2.46) .053 (1.53) .040 (1.02) .158 (4.01) .103 (2.62) .083 (2.11) I II

1500 Vac rms

2300 Vac rms

375 Vac rms

500 Vac rms

7.5 7.5 3.0 Contact Size Wire Size Max Current for Test (amps) Potential Drop (Millivolts at 25˚C) Insulation O.D. Limits, inch (mm) min. max. Service Rating Sea Level SERIES PREFIX PV MS 3470 L L -32 -32 P P W W L SHELL STYLE CLASS SIZE CONTACT ARRANGEMENT CONTACT TYPE ALTERNATE INSERT POSITIONS LESS COMPONENTS CLASS SHELL SIZE SHELL STYLE SERIES PREFIX MS - Complies with MIL-C-26482 Series 2 PV - ITT Cannon Interchangeable with MIL-C-26482, Series 2 *Consult factory for availablility. (PV Series and MS Series) *A - Fluid resistant, 200˚C, non-conductive (anodized) L - Fluid resistant, 200˚C, conductive, finish (nickely) W - Corrosive and fluid resistant, 175˚C (cadmium over nickel) P - Pin contact S - Socket contact A - Less pin contact* (MS only) B - Less socket contacts* (MS only) No designation required for normal posistion. Standard MS alternate positions available. Use "L" if PV connectors are ordered less contacts, sealing plugs and insertion/extraction tool ("L" is not stamped on connectors). To order MS connectors less contacts, purchase order must state less contacts. * The "A" and "B" designators are used only when other than power contacts are ato be installed (i.e. shielded, coaxial and thermocouple contacts). 8, 10, 12, 14, 16, 18, 20, 22 and 24 (Size 8 avialable in PV70 & 76 only) See page 162. ITT Cannon Part No. PV70 PV71 PV72 PV74 PV75 PV76 MS3470 MS3471 MS3472 MS3474 MS3475 MS3476 - Narrow Flange Receptacle - Cable Connecting Receptacle - Wide Flange Receptacle - Jam Nut Receptacle - Straight Plug, RFI Shielded - Straight Plug Military No. Description CONTACT TYPE ALTERNATE INSERT POSITIONS LESS COMPONENTS CONTACT ARRANGEMENTS 70,000 ft. Altitude (25˚C) Dielectric Withstanding Voltage (Test Volatge) Material Finish

www.ittcannon.com 159 Dimensions are shown in inches (millimeters). Dimensions subject to change. MIL-C-26482, Series 2 Connectors PV Narrow Flange Receptacle Cable Connecting Receptacle MS3470 PV70 MS3471 PV71 Shell Size* .462 (11.73) .462 (11.73) .462 (11.73) .462 (11.73) .462 (11.73) .462 (11.73) .587 (14.91) .587 (14.91) .620 (15.75) .474 (12.04) .594 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) 1.215 (30.85) 1.215 (30.85) 1.215 (30.85) 1.215 (30.85) 1.215 (30.85) 1.215 (30.85) 1.275 (32.40) 1.275 (32.40) 1.275 (32.40) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .110 (2.79) .110 (2.79) .110 (2.79) .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.91) 1.578 (40.08) 1.703 (43.26) 1/2-20 5/8-24 3/4-20 7/8-20 1-20 1-1/16-18 1-3/16-18 1-5/16-18 1-7/16-18 *See page 158 for part numbers.† To order backshell assemblies separately, see page 161. 1.492 (37.90) 1.492 (37.90) 1.492 (37.90) 1.492 (37.90) 1.492 (37.90) 1.552 (39.42) 1.552 (39.42) 1.552 (39.42) .286 (7.26) .416 (10.57) .476 (12.09) .626 (15.90) .706 (17.93) .831 (21.11) .956 (24.28) 1.081 (27.46) .286 (7.26) .416 (10.57) .476 (12.09) .626 (15.90) .706 (17.93) .831 (21.11) .956 (24.28) 1.081 (27.46) 1.842 (46.79) 1.842 (46.79) 2.077 (52.76) 2.077 (52.76) 2.077 (52.76) 2.137 (54.28) 2.137 (54.28) 2.137 (54.28) .880 (23.35) .950 (24.13) 1.010 (25.65) 1.070 (27.18) 1.130 (28.70) 1.190 (30.23) 1.260 (32.00) 1.320 (33.53) 2.115 (53.72) 2.250 (57.15) 2.340 (59.44) 2.475 (62.87) 2.574 (65.38) 2.767 (70.28) 2.890 (73.41) 3.012 (76.50) .462 (11.73) .462 (11.73) .462 (11.73) .462 (11.73) .462 (11.73) .587 (14.91) .587 (14.91) .620 (15.75) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .110 (2.79) .110 (2.79) .110 (2.79) 1.082 (27.48) 1.176 (29.87) 1.270 (32.26) 1.364 (34.64) 1.458 (37.03) 1.708 (43.38) 1.708 (43.38) 1.832 (46.53) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.578 (40.08) 1.578 (40.08) 1.703 (43.26) 1.215 (30.86) 1.215 (30.86) 1.215 (30.86) 1.215 (30.86) 1.215 (30.86) 1.275 (32.38) 1.275 (32.38) 1.275 (32.38) 5/8-24 3/4-20 7/8-20 1-20 1-1/16-18 1-5/16-18 1-5/16-18 1-7/16-18 .152/.142/(3.86/3.61) DIA SIZE 24 ONLY POLARIZING GROOVE L (TYP) F DIA B U THD J G .130/.190 (3.30/4.83) POLARIZING GROOVE R DIA. MAX. S MAX. (TYP.) EC REF. ES REF. ER REF. GR REF. HR FS B J V THD A DIA. W .130/.190 (3.30/4.83) K (TYP) (TP) .140 RAD. MAX. B Max F Max G Max J Max U Thread UNEF Class 2AK L Shell Size* Shell Size* TYPE R TYPE STYPE C Backshell Assemblies not supplied with MS connectors. Perfomance Specifications - Page 158 Contacts, Sealing Plugs, Assembly Tools - Pages 163, 165 Contacts Arrangements - Page 162 Fs Max. Es Max. Gr Max. Hr Max. Er Max. TYPE C Ec Max. TYPE S TYPE R Receptacle Assembly With Backshell† A Max B Max J Max R Dia. Max S Max W Max U Thread UNEF Class 2A

www.ittcannon.com 160 Dimensions are shown in inches (millimeters). Dimensions subject to change. MIL-C-26482, Series 2 Connectors PV Wide Flange Receptacle MS3472 PV72 Shell Size* .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) .493 (12.52) .493 (12.52) .493 (12.52) .493 (12.52) .493 (12.52) .587 (14.91) .587 (14.91) .620 (15.75) 1.215 (30.85) 1.215 (30.85) 1.215 (30.85) 1.215 (30.85) 1.215 (30.85) 1.275 (32.40) 1.275 (32.40) 1.275 (32.40) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .110 (1.98) .110 (1.98) .110 (1.98) .812 (20.62) .938 (23.83) 1.031 (26.19) 1.125 (28.58) 1.203 (30.56) 1.297 (32.94) 1.375 (34.93) 1.500 (38.10) 1.141 (28.98) 1.266 (32.16) 1.360 (34.54) 1.453 (36.91) 1.532 (38.91) 1.688 (42.88) 1.766 (44.86) 1.891 (48.03) 5/8-24 3/4-20 7/8-20 1-20 1-1/16-18 1-3/16-18 1-5/16-18 1-7/16-18 Shell Size* V Max. A Max. B Max. F Max. G Max. H Max. POLARIZING GROOVE POLARIZING GROOVE Q (TYP) H (TP).140 RAD. MAX. 4 HOLES .150 +_ .005 (3.81 +_ 0.13mm) DIA. B A DIA. P THD. G F .130/.190 (3.30/4.83) V A W F DIA. G H B GG L THD. .130/.190 (3.30/4.83) GG Panel Thickness W Dia. Max. L Thread UNEF Class 2 Shell Size* Receptacle Assembly With Backshell† * See page 158 for part numbers. † To order backshell assemblies separately, see page 161. BBs Max. Fs Max. BBR Max. BBC REF. TYPE C TYPE S TYPE R Backshell Assemblies not supplied with MS connectors. Performance Specifications - Page 158 Contacts, Sealing Pluts, Assembly Tools - Pages 163, 165 Contact Arrangments - Page 162 BBS REF. BBR REF. GR REF. HR FS GR Max. HR Max. TYPE C BBc Max. TYPE S TYPE R 1.492 (37.90) 1.492 (37.90) 1.492 (37.90) 1.492 (37.90) 1.492 (37.90) 1.552 (39.42) 1.552 (39.42) 1.552 (39.42) .954 (24.23) 1.078 (27.38) 1.266 (32.16) 1.391 (35.33) 1.516 (38.51) 1.641 (41.68) 1.828 (46.43) 1.954 (49.63) 2.078 (52.78) .767 (19.48) .892 (22.66) 1.079 (27.41) 1.205 (30.61) 1.329 (33.76) 1.455 (36.96) 1.579 (40.11) 1.705 (40.11) 1.829 (46.46) .113 (2.87) .113 (2.87) .113 (2.87) .113 (2.87) .113 (2.87) .113 (2.87) .148 (3.76) .148 (3.76) .148 (3.76) .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) .707 (17.96) .707 (17.96) .707 (17.96) .707 (17.96) .707 (17.96) .707 (17.96) .772 (19.61) .772 (19.61) .772 (19.61) 1.215 (30.86) 1.215 (30.85) 1.215 (30.85) 1.215 (30.85) 1.215 (30.85) 1.215 (30.85) 1.275 (32.40) 1.275 (32.40) 1.275 (32.40) 1.078 (27.38) 1.203 (30.56) 1.391 (35.33) 1.516 (38.51) 1.641 (41.68) 1.766 (44.86) 1.954 (49.63) 2.078 (52.78) 2.203 (55.96) 1/2-20 5/8-24 3/4-20 7/8-20 1-20 1-1/16-18 1-3/16-18 1-5/16-18 1-7/16-18 1.842 (46.79) 1.842 (46.79) 2.077 (52.76) 2.077 (52.76) 2.077 (52.76) 2.137 (54.28) 2.137 (54.28) 2.137 (54.28) .286 (7.26) .416 (10.57) .476 (12.09) .626 (15.90) .706 (17.93) .831 (21.11) .956 (24.28) 1.081 (27.46) 2.115 (53.72) 2.250 (57.15) 2.340 (59.44) 2.475 (62.87) 2.574 (65.38) 2.767 (70.28) 2.890 (73.41) 3.012 (76.50) .880 (22.35) .950 (24.13) 1.010 (25.65) 1.070 (27.18) 1.130 (28.70) 1.190 (30.23) 1.260 (32.00) 1.320 (33.53) .286 (7.26) .416 (10.57) .476 (12.09) .626 (15.90) .706 (17.93) .831 (21.11) .956 (24.28) 1.081 (27.46) A Max. B Max. F Max. G Max. H Max. Q Max. P Thread UNEF Class A Jam Nut Receptacle MS3474 PV74

www.ittcannon.com 161 Dimensions are shown in inches (millimeters). Dimensions subject to change. MIL-C-26482, Series 2 Connectors PV Straight Plug Backshells (Non-MS) MS3476 PV76 Shell Size* A Dia. Max. U Max. W Max. E Thread UNEF Class 2A Shell Size* E Thread UNEF Class 2A A Dia. Max. U Max. W Max. Shell Size* TYPE C VC Max. FS Max. VS Max. GR Max. HR Max. VR Max. TYPE S TYPE R Shell Size* ITT CANNON Conductive (Nickel finish) TYPE C (SHORT) TYPE S (Straight) TYPE R (90˚) ITT CANNON Conductive (Nickel finish) ITT CANNON Conductive (Nickel finish) 057-0716-002 057-0717-002 057-0718-002 057-0719-002 057-0720-002 057-0721-002 057-0722-002 057-0723-002 057-0683-002 057-0684-002 057-0685-002 057-0686-002 057-0687-002 057-0688-002 057-0689-002 057-0731-002 057-0704-001 057-0705-001 057-0706-001 057-0707-001 057-0708-001 057-0709-001 057-0710-001 057-0711-001 1.507 (38.28) 1.507 (38.28) 1.507 (38.28) 1.507 (38.28) 1.507 (38.28) 1.507 (38.28) 1.507 (38.28) 1.507 (38.28) .286 (7.26) .416 (10.57) .476 (12.09) .626 (15.90) .706 (17.93) .831 (21.11) .956 (24.28) 1.081 (27.46) .286 (7.26) .416 (10.57) .476 (12.09) .626 (15.90) .706 (17.93) .831 (21.11) .956 (24.28) 1.081 (27.46) 2.130 (54.10) 2.265 (57.53) 2.355 (59.82) 2.490 (63.25) 2.589 (65.76) 2.722 (69.14) 2.845 (72.26) 2.967 (75.36) 1.857 (47.17) 1.857 (47.17) 2.092 (53.14) 2.092 (53.14) 2.092 (53.14) 2.092 (53.14) 2.092 (53.14) 2.092 (52.14) .880 (22.35) .950 (24.13) 1.010 (25.65) 1.070 (27.18) 1.130 (28.70) 1.190 (30.23) 1.260 (32.00) 1.320 (33.53) 5/8-24 3/4-20 7/8-20 1-20 1-1/16-18 1-3/16-18 1-5/16-18 1-7/16-18 * See page 158 for part numbers. * See page 158 for part numbers. † To order backshell assemblies separatedly, see page 161. .840 (21.34) .999 (25.37) 1.139 (28.93) 1.261 (32.03) 1.337 (33.96) 1.477 (37.52) 1.602 (40.69) 1.723 (43.76) .926 (21.72) 1.043 (26.42) 1.183 (29.97) 1.305 (33.15) 1.391 (35.33) 1.531 (38.89) 1.656 (42.06) 1.777 (45.14) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) .765 (19.43) .840 (21.34) .999 (25.37) 1.139 (28.93) 1.261 (32.03) 1.337 (33.96) 1.477 (37.52) 1.602 (40.69) 1.723 (43.76) .782 (19.86) .926 (23.52) 1.043 (26.49) 1.183 (30.05) 1.305 (33.15) 1.391 (35.33) 1.531 (38.89) 1.656 (42.06) 1.777 (45.14) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1.230 (31.24) 1/2-20 5/8-24 3/4-20 7/8-20 1-20 1-1/16-18 1-3/16-18 1-5/16-18 1-7/16-18 POLARIZING BOSS U DIA. E THD. A DIA. W .130/.190 (3.30/4.83) VC REF. TYPE C TYPE S TYPE R Backshell Assemblies not supplied with MS connectors. Performance Specifications - Page 158 Contacts, Sealing Pluts, Assembly Tools - Pages 163, 165 Contact Arrangments - Page 162 VS REF. VR REF. GR REF. HR FS MS34745 Straight Plug, RFI Shielded (Not supplied with MS Connectors) Short (C) Straight (S) 90˚ Degree (R) Plug Assemblies with Backshell † PV75

www.ittcannon.com 162 Dimensions are shown in inches (millimeters). Dimensions subject to change. MIL-C-26482, Series 2 Connectors PV ContactArrangements Alternate Insert Positions Face view, pin insert Face view, pin insert Shell Size No. of Contacts Service Rating 8-33* 3-#20 I 14-12 4-#16, 8-#20 I 14-15 1-#16, 14-#20 I 14-18 18-#20 I 16-8 8-#16 II 16-23 1-#16, 22-#20 I 16-26 26-#20 I 18-8 8-#12 I 22-21 21-#16 II 20-41 41-#20 I 20-39 2-#16, 37-#20 I 20-16 16-#16 II 18-32 32-#20 I 18-11 11-#16 II 22-41 24-#20, 14-#16 I SHELL SIZE Shell Contact Cavities Contact Arrangements 90˚ 90˚ 90˚ 60˚ 45˚ 40˚ 43˚ 17˚ 15˚ 30˚ 54˚ 158˚ 60˚ 180˚ 62˚ 85˚ 238˚ 63˚ 45˚ 16˚ 39˚ 30˚ 30˚ 90˚ 90˚ 112˚ 155˚ 92˚ 90˚ 110˚ 90˚ 165˚ 152˚ 270˚ 119˚ 138˚ 318˚ 144˚ 126˚ 135˚ 135˚ 142˚ 165˚ 225˚ 180˚ 180˚ 203˚ 270˚ 184˚ 155˚ 180˚ 315˚ 180˚ 275˚ 241˚ 222˚ 333˚ 252˚ 225˚ 175˚ 264˚ 226˚ 315˚ 225˚ 270˚ 292˚ 295˚ 273˚ 234˚ 270˚ 331˚ 338˚ 340˚ 265˚ 347˚ 333˚ 349˚ 314˚ 324˚ ARRANGE- MENT POS CODE XN W Y Z 22-55 55-#20 I 24-19 19-#12 II 24-31 31-#16 I 24-61 61-#20 I 14-19 19-#20 I 8-98* 3-#20 I 10-6 6-#20 I 12-3 3-#16 II 12-8 8-#20 I 12-10 10-#20 I 14-4 4-#12 I 14-5 5-#16 II Shell Size No. of Contacts Service Rating Shell Size No. of Contacts Service Rating Shell Size No. of Contacts Service Rating Contact arrangements requiring reduced diameter for lead-in chamfer on outer row of contact cavities as indicated below. * Layouts are available in shell styles MS3470 and MS3476 only. 33, 38 A, B, C C, G A, B, C, D, E, F, G, and H A, C, E, G, J, and L B, D, F, H, K, and M A, B, C, D, E, F, G, H, J, K, L, M, N, P, and R) A, B, C, D, E, F,G, H, J, K, L, M, N, P, R, S, and T A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S, T, U, V, W, X, and Y A A A A A A AA JKB B B B C C C C D D D D E E E F F G G H H A A A A BB BB C C C C D D D D EE E E F F F F G G G G H HH H J J K K L L M M N N PP R R T T U U V V W W X X Y Y Z Z a b c S S A A BB C C D D E E F F G G HH J J K K L L M M N N P P R R T T U U V V W W X X Y Z a b c de f g h j k l m n p r s t u S S A A B B C C D D E E F F G G H H J J K K L L M M N N P P R R T U V W X Y Z a b c de f g h j k l m n p s t S A A A A B B B B C C C C D D D D E E E E F F FF G G G G H H H H J J J J K K K K L L L L M M M N N N P P P R R R T T T U U U V V V W W W X X X Y Y Y Z Z Z a a a b b b c c c d d d e e e f f f g g g h h h j j j k k l l m m n n r r p p s s t t u u v w x z AA BB CC DD EE FF GG HH S A AA BB CC DD EE FF GG HH JJ KK LL MM NN PP A A BB B C C C D D D E E E F F F G G G H HH J J J K K K L L L M M M N N N P P QP R RR TT T U U U V V V W W X X Y Y Z Z a a b b c c d d e e f f g g h j k i m n r z y x w vu p q s t S SS S S S A AAA BBB B C CC C DDD D EEE E F FF F GGG G HHH H JJJ J KKK K L LL L M MM M NN N P P P R R R T T UU V SS B C B C D E F B B C C

www.ittcannon.com 163 Dimensions are shown in inches (millimeters). Dimensions subject to change. MIL-C-26482, Series 2 Connectors PV Thru-Bulkhead Receptacle How to Order - PV-TBF Tooling PV-TBF Shell Size .471 (11.96) .588 (14.94) .748 (19.00) .873 (22.17) .998 (25.35) 1.123 (28.52) 1.248 (31.70) 1.373 (34.87) 1.498 (38.05) Notes: 1) Shell available in conductive (nickel finish) only. 2) Contacts are nonremovable. PV-TBF - ITT Cannon prefix Pin and socket CIET-20-11 (274-7001-006) M81969/14-11 M81969/14-03 M81969/14-04 Red Blue Yellow White White White MS27534-20, MS3447-20, NAS1664-20 MS27534-16, MS3447-16, NAS1664-16 MS27534-12, MS3447-12, NAS1664-12 274-7007-000 274-7008-000 274-7009-00 CIET-16-03 (274-7002-000) CIET-12-04 (274-7003-000) Shell available in conductive (nickel fin- ish) only. Contacts are nonremovable. Designed to MS3119 configuration and meets the performance requirements of MIL-C-26482 Series 2. Notes: 1) 3)No designation required for normal. Standard MS alternate posistions available. 8 through 24 .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .094 (2.39) .094 (2.39) .094 (2.39) 1.125 (28.58) 1.125 (28.58) 1.125 (28.58) 1.125 (28.58) 1.125 (28.58) 1.125 (28.58) 1.406 (35.71) 1.406 (35.71) 1.406 (35.71) .577 (14.66) .577 (14.66) .577 (14.66) .577 (14.66) .577 (14.66) .577 (14.66) .703 (17.86) .703 (17.86) .703 (17.86) .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.91) 1.578 (40.08) 1.703 (43.26) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .344 (8.74) .344 (8.74) .311 (7.90) Contact Size Cannon Part Number M81969 Part Number Insertion Color Tip Extraction Color Tip Superseded Mil. Pt. No. Unwired Contact Tools Cannon Pt. No. CBT 520/530 Insertion/Extraction ToolsCrimp Tool M22520/1-01 Crimp Tool with M22520/1-02 Turret Wire Contact Tools SERIES PREFIX PV-TBF 10 -6 PS W SERIES PREFIX SHELL SIZE INSERT ARRANGEMENTS SHELL SIZE INSERT ARRANGEMENTS CONTACT STYLE CONTACT STYLE PANEL PANEL X X A DIA. K A DIA. S (TYP) R (TP) POLARIZING GROOVE

4 HOLES

.140 RAD. MAX. M L FRONT PANEL MOUNTING REAR PANEL MOUNTING ALTERNATE POLARIZING POSITION ALTERNATE POLARIZING POSITION A Dia +_.003 (0.08) K +_.016 (0.41) M +_.016 (0.41) L Max. S Max. X Max. R (TP)

www.ittcannon.com 164 Dimensions are shown in inches (millimeters). Dimensions subject to change. MIL-C-26482, Series 2 Connectors PV Panel Cutouts Panel Thickness Dummy Stowage Receptacles Jam Nut Receptacle Shell Size .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.91) 1.578 (40.08) 1.703 (43.26) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.16) .125 (3.18) .152 (3.86) .493 (12.52) .493 (12.52) .493 (12.52) .493 (12.52) .493 (12.52) .493 (12.52) .587 (14.91) .587 (14.91) .620 (15.75) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .110 (2.79) .110 (2.79) .110 (2.79) .661 (16.79) .824 (20.93) .948 (24.08) 1.072 (27.23) 1.197 (30.40) 1.322 (33.58) 1.447 (36.75) 1.572 (39.93) Shown here are the maximum panel thickness including screw head height allowable to ensure complete connector operation. .125 (3.18) Max. (backshell clearance for front mount) .087 (2.21mm) maximum for shell size 10 thru 18 (rear mount) .212 (5.38mm maximum for shell size 20 thru 24 (rear mount) .125 (3.18) Max. (backshell clearance for front mount) .118 (3.00mm) maximum for shell size 10 thru 18 (rear mount) .212 (5.38mm maximum for shell size 20 thru 24 (rear mount) .697 (17.70) .895 (22.73) 1.010 (25.65) 1.135 (28.33) 1.260 (32.00) 1.385 (35.18) 1.510 (38.35) 1.635 (41.53) .620 (15.75) .740 (18.80) .864 (21.95) .990 (25.15) 1.118 (28.40) 1.240 (31.50) 1.366 (34.70) 1.490 (37.85) 1.616 (41.05) .594 (18.26) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) .125 (3.14) .125 (3.17) .125 (3.17) .125 (3.17) .125 (3.17) .125 (3.17) .125 (3.17) .125 (3.17) .155 (3.97) .740 (18.80) .864 (21.95) .990 (25.15) 1.118 (28.40) 1.240 (31.50) 1.366 (34.70) 1.490 (37.85) 1.616 (41.05) .812 (20.62) .938 (23.93) 1.031 (26.19) 1.125 (28.58) 1.203 (30.56) 1.297 (32.94) 1.375(34.92) 1.500 (38.10) .155 (3.97) .155 (3.97) .155 (3.97) .155 (3.97) .155 (3.97) .155 (3.97) .155 (3.97) .155 (3.97) F DIA. G DIA. A DIA J KE (TP) MS - Complies with MIL-C-26482PVS - ITT Cannon prefix - 15 -PV G - Conductive finish (nickel) A - Nonconductive finish (anodized) 8 though 24 3115 - Dummy receptacle 8 through 24 L - Conductive finish (nickel) A - Nonconductive finish (anodized) NOTE: Usable on KPT/KPSE series also. F (TYP) E -.000 (0.00) DIA. A T DIA. 4 MTG. HOLES R (TYP.) Shell Size A Dia. Max. E (TYP) F Max. G Max. J Max. K Max. Shell Size Narrow Flange Receptacle Wide Flange Receptacle BACKSHELL BACKSHELL COUPLING NUT How to Order PV DESCRIPTION MS DESCRIPTION SERIES PREFIX SERIES PREFIX MS STANDARD SHELL SIZE CLASS PVS -15 G 12 MS 3115 -12 L DUMMY RECEPTACLE INDICATOR CLASS SHELL SIZE COUPLING NUT A Dia. T Dia. Screw SizeR Shell Size A Dia. T Dia. Screw SizeR E +_.005 (0.13) F Dia. +_.005 (0.13) Flange Front and Rear Mounting Mounting Hole Flange Front and Rear Mounting Mounting Hole Narrow Flange and Thru-Bulkhead/Wide Flange

www.ittcannon.com 165 Dimensions are shown in inches (millimeters). Dimensions subject to change. MIL-C-26482, Series 2 Connectors PV Protective Metal Caps Contacts Wire Hole Fillers Plugs SERIES PREFIX PVS - ITT Cannon Prefix MS - Complies with MIL-C-26482 (Series 2) 80 or 3180 - Plug Cap 81 or 3181 - Receptacle Cap 8 thru 24 C - Sash chain (MS approved) N - Sash chain with ring (81 or3181 type only) MS approved A - Hard anodic, non-conductive (MS approved) G - Nickel, conductive (not MS) (PVS only) NOTE: Usable on KPT/KPSE series also. F A L M BQ R N .047 1,19mm) Max. .094 2,39mm) Max. .169 +_ .008 DIA. (4.29 +_ 0.20) H +.500 (12.7) -.250 (6.35) H +.500 (12.7) -.250 (6.35) N style used primarily on Jam Nut Receptacle. TYPE SHELL SIZE TERMINATION STYLE FINISH CHAIN LENGTH PVS MS Shell Size Contact Size M39029 Number Contact Size Alumel Thermocouple Contacts Contacts for printed circuit applications are also available. Consult factory. ChromalType 1st Color Brands 2nd 3rd ITT Cannon Contact Size Cannon Military Superseded Mil. Pt. No. Color Code Part Number 225-0070-000 225-0071-000 225-0072-000 MS27488-20 MS27488-16 MS27488-12 Red Blue Yellow MS3187-20 M83723/28-20 MS3187-16 M83723/28-16 MS3187-12 M83723/28-12 Socket Pin Socket Pin Socket Pin M39029/5-115 M39029/4-110 M39029/5-116 M39029/4-111 M39029/5-118 M39029/4-113 Brown Brown Brown Brown Brown Brown Brown Brown Brown Brown Brown Brown Green Black Blue Brown Grey Orange 031-9174-004 030-9173-006 031-9206-006 030-9205-007 031-9186-003 030-9185-003

20 Pin

20 Socket

.474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.96) 1.501 (38.13) .486 (12.34) .607 (15.42) .766 (19.46) .890 (22.60) 1.015 (25.78) 1.141 (28.98) 1.265 (32.13) 1.390 (35.31) 1.515 (38.48) .719 (18.26) .844 (21.44) 1.000 (25.40) 1.125 (28.58) 1.250 (31.75) 1.375 (34.93) 1.500 (38.10) 1.625 (41.26) 1.750 (44.45) 3.000 (76.20) 3.000 (76.20) 3.500 (76.20) 3.500 (88.90) 3.500 (88.90) 3.500 (88.90) 4.000 (101.60) 4.000 (101.60) 4.000 (101.60) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .625 (15.88) .625 (15.88) .658 (16.71) .399 (10.13) .399 (10.13) .399 (10.13) .399 (10.13) .399 (10.13) .399 (10.13) .461 (11.71) .461(11.71) .494 (12.55) .578 (14.68) .703 (17.86) .891 (22.63 1.016 (25.81) 1.141 (28.98) 1.266 (32.16) 1.391 (35.33) 1.516 (38.51) 1.641 (41.68) .734 (18.64) .859 (21.82) 1.000 (25.40) 1.125 (28.58) 1.250 (31.75) 1.375 (34.93) 1.500 (38.10) 1.625 (41.26) 1.750 (44.45) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .602 (15.29) A Max. Dia. B Max. F Max. Dia. L Max. M Max. N Min. Dia. Q Max. R Max.H 3180 -12 -12 C C A A CHAIN LENGTH Receptacles

www.ittcannon.com 166 Dimensions are shown in inches (millimeters). Dimensions subject to change. MIL-C-26482, Series 2 Connectors PV Assembly Procedures STRIPPING AND CRIMPING 3/16" for #20 CONTACT 9/32" for #16 CONTACT 9/32" for #12 CONTACT Right Wrong CONTACT INSERTION OPENING COLORED END FOR INSERTION CONTACT EXTRACTION COMPLETION BROKEN CIRCLE BREAK 1. Strip wires according to contact size: 3/16" for #20 and 9/32"for #16 and#12. #20 contacts accommodate AWG wire sizes 20, 22, or 24; #16 accommodates 16, 18 or 20; and #12 accommodates 12 or 14. 4. Insert contact and wire into tool jaws. To crimp, squeeze handles together fully until ratchet release and allows handles to expand; otherwise, contact cannot be extracted from tool jaws. Maintain slight insertion pressure on wire while crimping contact to wire. 3. Slide back tool on wire shile holding thumb against wire at opening. Wire will slip into tool. NOTE: Socket contacts should be inserted partially into grommet by hand before using insertion tool. 6. Withdraw tool from rear of plug. To be sure that contact is locked, pull back lightly on wire. Then remove tool from wire and proceed with other contacts. 2. Push tool into rear of plug until it bottoms. At this point, tool releases tines on retaining clip so that contact can be extracted. 3. While maintaining slight insertion force on tool, firmly hold wire against serrated shoulder at center of tool and extract both wired contact and tool from plug. 4. Check face of plug or receptacle for proper contact installation. In socket inserts with a large number of contact, cavities are identified in a spiral pattern. A projecting line from the spiral indictates omission of a letter; a broken circle around a cavity indicates transition between capitals and lower case and double letters. 7. After all contacts are inserted, fill unwired cavities with sealing plugs (insert head last and leave end protruding for ease of removal), assemble backshell on rear of connector. 1. Remove backshell and slide back along wires to allow access. To extract a contact, use white end of CIET tool. Place wire into tool at large opening. Slide back tool on wire while holding thumb against wire at opening. Wire will slip into tool. 4. With tool pressed against shoulder of contact, starting at the center cavity, insert wired contact and tool into properly identified cavity at rear of plug with firm, even pressure. Do not use excessive pressure. 5. When contact bottoms, a slight click can be heard as tines of metal reataining clip snaps into place behind contact shoulder. 1. Remove backshell and put wired contacts thru cable clamp opening. 2. Used colored end of CIET tool for insertion. Place wire into tool at large opening. To facilitate contact insertion, a 6-in. min. free lenght of wire is recommended. 2. Insert wire into rear of contact. Wire insulation must butt against rear of contact. Wire must be visible thru inspection hole. 3. Use M22520/1-01 crimp tool with proper crimp locator M22520/ 1-02. The color code hand on the contact (red for #20, blue for #16 and yellow for #12) must match the color code of the locator and the insertion tool throughout the crimping and assembly operations.