DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MMD MONITOR/QUARTZEK – An ILSI Company,
5458 Louie Lane, Reno, NV 89511
Phone: (775) 851-8880, www.mmdcomp.com 07/24/13 U Subject to change without notice Pg 1of 2 Revision: MMIIHH SSeerriieess 55XX77 CCeerraammiicc SSMMDD OOsscciillllaattoorr Low Profile SMD Package Hermetically Sealed RoHS Compliant Wide Frequency Range Marking Detail Frequency Range 1.500MHZ to 156.250MHZ Temperature Stability* (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature Range -55°C to +125°C Aging (+25°C ±3°C) ±5ppm for first year Waveform HCMOS Supply Voltage ±5% (Vdd) +1.80 VDC +2.50 VDC +3.30 VDC +5.00 VDC Supply Current 15mA 40mA 40mA 70mA Load 15pF 15pF 10 TTL Gates or 30pF
10 TTL Gates
Logic “0” 10% Vdd max Logic “1” 90% Vdd min Rise/Fall Time (10% to 90% of Supply Voltage) 4nSec Symmetry (50% of waveform) 40%/60% (45%/55% optional) Start-up Time 10mSec max Jitter (RMS) Less than 1 pSec Tri-State Operation Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) * Inclusive of Temperature., Load and Voltage Standby Current Consumption 10uA Mechanical & Environmental Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ Line 2 = SYYWWL S = Internal Code YYWW = 4 Digit Date Code (Year / Week) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1
MMD MONITOR/QUARTZEK – An ILSI Company, Phone: (775) 851-8880, www.mmdcomp.com 07/24/13 U Subject to change without notice Pg 2of 2 Revision:
5 X 7 Ceramic SMD
Please Consult with MMD Sales Department for any other Parameters or Options * Not available in +1.8 VDC and +2.5 VDC Operating Temperature Blank = 0°C to +70°C Symmetry Blank = 40/60% A = 45/55% Packaging Blank = Bulk T = Tape and Reel H = HCMOS Output Frequency Stability 010 = ±10 ppm* 015 = ±15 ppm 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Pin 1 Connection Blank = N/C H = Tri-state S = Stand-by Supply Voltage 1 = +1.8 VDC 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC H PITCH PITCH 8.00 [.315] TAPE WIDTH 16.00 [.630] DIRECTION OF FEED 180[7 IN]REEL DIA REEL DIA Q1 Q2 Q3 Q4 Q1 Q2 Q4Q3 TAPE WIDTH 1000QTY PER REEL PIN 1 ORIENT. Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise specified. 4. Do not scale drawing. Part Number Guide Mechanical Details Tape & Reel Dimensions