MIG75J101H TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

TOSHIBA Intelligent Power Module Silicon N Channel IGBT MIG75J101H High Power Switching Applications Motor Control Applications /G6c/G20Integrates inverter & control circuits (igbt drive units, protection units for over-current, under-voltage & over-temperature) in one package. /G6c/G20The electrodes are isolated from case. /G6c/G20High speed type IGBT : V CE (sat) = 2.5 V (Max.) toff = 3.0 µs (Max.) trr = 0.30 µs (Max.) /G6c/G20Outline : TOSHIBA 2-110A1A /G6c/G20Weight : 520 g Equivalent Circuit

Maximum Ratings (Tj = 25°C) Stage Characteristic Condition Symbol Ratings Unit Supply voltage P-N power terminal V CC 450 V Collector-emitter voltage ― V CES 600 V Collector current Tc = 25°C, DC I C 75 A Forward current Tc = 25°C, DC I F 75 A Collector power dissipation Tc = 25°C P C 235 W Inverter Junction temperature ― T j 150 °C Control supply voltage V D-GND terminal V D 20 V Input voltage IN-GND terminal V IN 20 V Fault output voltage FO-GND (L) terminal V FO 20 V Control Fault output current FO sink current I FO 14 mA Operating temperature ― TC −20 ~ +100 °C Storage temperature range ― T stg −40 ~ +125 °C Isolation voltage AC 1 minute V ISO 2500 V Module Screw torque M5 ― 3 Nm Electrical Characteristics (Tj = 25°C) a. Inverter Stage Characteristic Symbol Test Condition Min Typ. Max Unit Tj = 25°C ― ― 1 Collector cut-off current I CEX V CEX = 600V Tj = 125°C ― ― 20 mA Collector-emitter saturation voltage V CE (sat) VD = 15 V, IC = 75 A VIN = 15 V → 0 V Tj = 125°C ― 2.0 ― V Forward voltage V F I F = 75A ― 2.1 3.0 V ton ― 1.0 2.0 toff ― 1.2 3.0 tf ― 0.2 0.5 Switching time trr VCC = 300 V, IC = 75 A VD = 15 V, VIN = 15 V↔0 V Inductive load (Note 1) ― 0.1 0.3 µs

b. Control Stage (Tj = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit High side I D (H) ― 8 ― Control circuit current Low side I D (L) VD = 15 V ― 24 ― mA Input-on signal voltage V IN (on) VD = 15 V, IC = 75 mA 1.3 1.5 1.7 V Input-off signal voltage V IN (off) VD = 15 V, IC = 75 mA 2.2 2.5 2.8 V Protection I FO (on) 8 10 12 Fault output current Normal I FO (off) VD = 15 V ― ― 1 mA Over current protection trip level Inverter OC V D = 15 V, Tj = 125°C 105 150 ― A Short circuit protection trip level Inverter SC V D = 15 V, Tj = 125°C 157 225 ― A Over current cut-off time t off (OC) VD = 15 V ― 5 ― µs Trip level OT 110 118 125Over temperature protection Reset level OTr Case temperature ― 98 ― Trip level UV 11.0 12.0 12.5Control supply under voltage protection Reset level UVr ― 12.5 ― V Fault output pulse width t FO VD = 15 V 1 2 3 ms *1: Duty = 50% *2: Duty = 50% (all elements) & fault output current (sink)

d. Thermal Resistance (Tj = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Inverter IGBT stage ― ― 0.553 Inverter FRD stage ― ― 1.000 ― ― ― ― Junction to case thermal resistance R th (j-c) ― ― ― ― °C / W Case to fin thermal resistance R th (c-f) Compound is applied ― 0.05 ― °C / W Note 1: Switching time test circuit & timing chart

TOSHIBA 2-110A1A Unit: mm

/Gb7/G20TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. /Gb7/G20The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. /Gb7/G20The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. /Gb7/G20The information contained herein is subject to change without notice. 000707EAARESTRICTIONS ON PRODUCT USE