MIG50J101H TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

TOSHIBA Intelligent Power Module Silicon N Channel IGBT MIG50J101H High Power Switching Applications Motor Control Applications Integrates inverter & control circuits (IGBT drive units, protection units for over-current, under-voltage & over-temperature) in one package. The electrodes are isolated from case. High speed type IGBT : VCE (sat) = 2.5 V (max) toff = 3.0 µs (max) trr = 0.30 µs (max) Package dimensions : TOSHIBA 2-110A1A Weight : 520 g Equivalent Circuit

Maximum Ratings (Tj = 25°C ) Stage Characteristic Condition Symbol Ratings Unit Supply voltage P-N power terminal VCC 450 V Collector-emitter voltage VCES 600 V Collector current Tc = 25°C, DC IC A Forward current Tc = 25°C, DC IF A Collector power dissipation Tc = 25°C PC 150 W Inverter Junction temperature Tj 150 Control supply voltage VD-GND terminal VD V Input voltage IN-GND terminal VIN V Fault output voltage FO-GND (L) terminal VFO V Control Fault output current FO sink current IFO mA Operating temperature TC −20 ~ +100 Storage temperature range Tstg −40 ~ +125 Isolation voltage AC 1 minute VISO 2500 V Module Screw torque Nm Electrical Characteristics (Tj = 25°C) a. Inverter Stage Characteristic Symbol Test Condition Min Typ. Max Unit Tj = 25°C Collector cut-off current ICEX VCE = 600V Tj = 125°C mA Tj = 25°C 2.0 2.5 Collector-emitter saturation voltage VCE (sat) VD = 15 V, IC = 50 A VIN = 15 V → 0 V Tj = 125°C 2.0 V Forward voltage VF IF = 50A 2.1 3.0 V ton 0.8 2.0 toff 1.2 3.0 tf 0.25 0.5 Switching time trr VCC = 300 V, IC = 50 A VD = 15 V, VIN = 15 V ↔ 0 V Inductive load (Note 1) 0.1 0.3 µs

b. Control Stage (Tj = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit High side ID (H) Control circuit current Low side ID (L) VD = 15 V mA Input-on signal voltage VIN (on) VD = 15 V, IC = 50 mA 1.3 1.5 1.7 V Input-off signal voltage VIN (off) VD = 15 V, IC = 50 mA 2.2 2.5 2.8 V Protection IFO (on) Fault output current Normal IFO (off) mA Over current protection trip level Inverter OC VD = 15 V, Tj = 125°C 100 A Short circuit protection trip level Inverter OC VD = 15 V, Tj = 125°C 110 150 A Over current cut-off time toff (OC) VD = 15 V µs Trip level OT 110 118 125 Over temperature protection Reset level OTr Case temperature Trip level UV 11.0 12.0 12.5 Control supply under voltage protection Reset level UVr 12.5 V Fault output pulse width tFO VD = 15 V ms

c. Thermal Resistance (Tj = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Inverter IGBT stage 0.833 Junction to case thermal resistance Rth (j-c) Inverter FRD stage 2.000 °C / W Case to fin thermal resistance Rth (c-f) Compound is applied 0.05 °C / W Note 1: Switching time test circuit & timing chart PG TLP559 15 V 15 k Intelligent power module VD IN GND OUT VS GND U (V, W) P VCC 15 V 15 k VD IN GND OUT VS GND IF 16 mA 0.1 F 33 F 0.1 F 66 F

Package Dimensions: TOSHIBA 2-110A1A Unit: mm

TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. The information contained herein is subject to change without notice. 000707EAA RESTRICTIONS ON PRODUCT USE