MN130S SANKEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
./4 0 5 0 8 1 2 SSE-23638 1ʗ6 61426-01 -5% 1. ద༻ൣғ Scope γϦίϯύϫʔτϥϯδελMN130S ʹ͍ͭͯద༻͢Δɻ The present specifications shall apply to Sanken silicon power transistor type MN130S. 2. ֨( पลԹ 25 ˆ) Absolute Maximum Ratings (Ta=25ˆ) Characteristic Symbol Rating Unit ίϨΫλɾϕʔεిѹ Collector-Base V oltage VCBO 200 V ίϨΫλɾΤϛολిѹ Collector-Emitter V oltage VCEO 140 V Τϛολɾϕʔεిѹ Emitter-Base V oltage VEBO 6 V ίϨΫλిྲྀ Collector Current IC 10 A ϕʔεిྲྀ Base Current IB 4 A Collector Power Dissipation PC 130 (Tc=25ˆ) W ෦Թ Junction Temperature Tj 150 ˆ อଘԹ Storage Temperature Tstg -55ʙʴ150 ˆ 3. తಛੑ ( पғԹ 25 ˆ) Electrical Characteristics (Ta=25ˆ) ֨نLimits Characteristic Symbol Test Conditions MIN TYP MAX Unit େίϨΫλःஅిྲྀ Collector Cut-off Current ICBO V CB=200V 10 ЖA େΤϛολःஅిྲྀ Emitter Cut-off Current IEBO V EB=6V 10 ЖA ίϨΫλɾΤϛολిѹ Collector-Emitter V oltage VCEO I C=50mA 140 V DC Current Transfer Ratio hFE ˞ VCE=4V , IC=3A 70 180 ίϨΫλɾΤϛολిѹ Collector-Emitter Saturation V oltage VCE (sat) IC=5A, IB=0.5A 0.5 V ःஅप Cut-off Frequency fT V CE=12V , IE=-0.5A 20 MHz Output Capacitance Cob VCB=10V , IE=0A f=1MHz 250 pF ˞ hFE ϥϯΫ : 70 ʙ140 (P), 90ʙ180 (Y) hFE rank
./4 0 5 0 8 1 2 SSE-23638 2ʗ6 61426-01 -5% 4. ଐ Plastic molded transistor accessories .*$" .5 ࣭ࡐ : ϚΠΧ Material : MICA Έ : 0.06t ʴ0.045 Thickness Dimensions in mm ਤ൪ 4A-E01560 ʵ0.005
./4 0 5 0 8 1 2 SSE-23638 3ʗ6 61426-01 -5% 5 ܗ( ϦʔυϑΥʔϛϯάNo.100) Packing information (Lead Forming No.100) 5-1 ࣭ࡐ Packing type, physical dimensions and material (1) ϕʔε ˞ ˞ Base (2) ίϨΫλ Collector (3) Τϛολ Emitter ( 1 ) ( 2 ) ( 3 ) <> ͢ɻ <Note> ˞shows the dimensions measured at the bottom of lead. ࢠ Lead terminal Cu Ni ϝοΩɾాσΟοϓॲཧ Ni plating, solder dip treatment ώʔτγϯΫ Heat sink Cu Ni ϝοΩ Ni plating
Description
5-2؍ Appearance The body shall be clean and shall not bear any stain, rust or flaw. 5-3 ࣔ Marking The type number and lot number shall be clearly marked in white. a. ࣔ Type Number b. ߸ Lot Number ࣈ ܻ 1st letter The last digit of year ࣈ ݄ 2nd letter Month 1ʙ9݄ : ࣈ 10݄O 11݄N 12݄D (1 to 9 for Jan. to Sept., O for Oct. N for Nov. D for Dec.) c. h FE ϥϯΫ hFE rank ୯Ґ : mm Dimensions in mm TG3A-0101 MN130S b. c. 3.2
./4 0 5 0 8 1 2 SSE-23638 4ʗ6 61426-01 -5% 6. ༻্ͷҙ CAUTION/ WARNING ༻্ͷҙ CAUTION/ WARNING Since reliability can be affected adversely by improper storage environment and handling methods during Characteristic tests, please observe the following cautions. (1) ߲ࣄ Cautions for Storage Ensure that storage conditions comply with the standard temperature (5 to 35ˆ) and the standard relative humidity (around 40 to 75%) and avoid storage locations that experience extreme changes in temperature or humidity. Avoid locations where dust or harmful gases are present and avoid direct sunlight. Reinspect for rust leads and solderbility that have been stored for a long time. (2) ߲ࣄ Cautions for characteristic Tests and Handling ˔ ଓ When characteristic tests are carried out during inspection testing and other standard tests periods, protect the Power Transistors from surge of power from the testing device, shorts between the Power Transistors and the heatsink. (3) γϦίʔϯάϦʔεʹ͍ͭͯ Silicone Grease ˔ Λখ͘͢͞ Ұʹ When using a heatsink, please coat the back surface of the Power Transistors and both surfaces of the insulating plate with a thin layer of silicone gr ease to improve heat transfer between the Power Transistors and the heatsink. There are types of silicone grease of which oil ingredients may permeate the inside of products. Since there is a possibility that it may shorten the lifetime of the products, please pay sufficient attention to the choice of the silicone grease. ਪγϦίʔϯάϦʔε Recommended Silicone grease ˔ G746 (ۀֶ(גShin-Etsu Chemical Co., Ltd.) ˔ YG6260 (γϦίʔϯ (גToshiba Silicone Co., Ltd.) ˔ SC102 ( ౦ϨɾμίʔχϯάɾγϦίʔϯ(גDow Corning Toray Silicone Co., Ltd.)
Table 1. Screw Tightening Torques please pay special attention for that.
./4 0 5 0 8 1 2 SSE-23638 6ʗ6 61426-01 -5% (6) ͦͷଞ Others Ҽ Application and operation examples described in this document are quoted for the sole purpose of reference for the use of the products herein and Sanken can assume no responsibility for any infringement of industrial property rights, intellectual property rights or any other rights of Sanken or any third party which may result from its use. When using the products herein, the applicability and suitability of such products for the intended purpose object shall be reviewed at the users responsibility. ˔ োͷൃ Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products at a certain rate is inevitable. Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the equipment or systems against any possible injury, death fires of or damages to the society due to device failure or malfunction. ثػࢠ(ثػ ͳͲ)༷ॻʹॺ໊ຢԡҹͷ্ ͍க͠·͢ɻ ͞ΕΔஔ(ɾ൜ஔɺ छ҆શஔͳͲ)༷ॻʹ ͍க͠·͢ɻ ͞ΕΔஔ(ͳ Sanken products listed in document are designed and intended for the use as components in general purpose electronic equipment or apparatus (home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Please return to us this document with your signature(s) or seal(s) prior to the use of the products herein. When considering the use of Sanken products in th e applications where higher reliability is required (transportation equipment, and its control systems, traffic signal control systems or equipment, fire / crime alarm systems, various safety devices, etc.), please contact your nearest Sanken sales representative to discuss, and then return to us this document with your signature(s) or seal(s) prior to the use of the products herein. The use of Sanken products without the written consen t of Sanken in the applications where extremely high reliability is required (aerosp ace equipment, nuclear power contro l systems, life support systems, etc.) is strictly prohibited. Anti radioactive ray design is not considered for the products listed herein.