MPD8021 MICREL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- 12 N-channel, 100V, 200mA, 10Ω , fully-floating DMOS power FETs (can be paralleled for 100V, 2.4A, 0.83Ω single, half-bridge, or bilateral switches)
- 40 high-voltage PMOS FETs (for level shifting, high-voltage amplifiers)
- 12 high-voltage 200Ω , DMOS FETs (for level shifting, voltage amplifiers)
- 20 high-voltage, grounded-source, DMOS FETs (for level shifting, current mirrors)
- >100 uncommitted CMOS gates
- 12 CMOS/TTL I/O buffers
- 13 low-voltage CMOS tile arrays (for op amps, comparators, digital circuitry)
- 14 dual-collector PNPs and 12 NPNs (for trimmed bandgaps, low-offset amplifiers or com- parators, temperature sensor)
- 3-bit trimming network (for production trimmed bandgaps or offsets)
- High- and low-value resistors and capacitors (>1MΩ total resistance, 45pF total capacitance)
- 12V and 6V zener diodes (gate-to-source clamps, voltage references)
- 67 I/O pads (36 include 2kV ESD protection)
- Guaranteed –55°C to +150°C operation
- Several package options
- Low-cost prototyping program
- Design support via Internet
Applications
- 2 φ and 3φ motor control
- High-voltage, controlled-slew, bus drivers
- High-voltage display drivers
- Lamp drivers with current limit and overtemperature protection
- Relay and solenoid drivers
- Half- and full-bridge drivers
- Multioutput switching power supplies
- High-voltage linear power supplies
- High-voltage signal processing MPD8021 World-Wide Web Site
- http://www.micrel.com — select “ e ” or “Custom Solutions”
- e-mail: help@ezanalog.com
DMOS Output Device Breakdown (BVDSS ), Note 4.+110V DMOS Drain Current General Note:Devices are ESD protected; however, handling precau- tions are recommended. Note 1: VSUB is the substrate bias voltage. Note 2: V+ is the positive ESD clamp potential, user specificed up to +100V. Note 3: Maximum voltage across low-voltage analog or digital MOS. Note 4: DMOS source-to-body shorted to substrate at 0V. Note 5: VGS = 15V. Note 6: 5µs pulse, 10% duty cycle. Note 7: Measured relative to source-to-body short. Note 8: Measured between any two pins. Operating Ratings Electrical and Physical Summary Bipolar Devices CMOS Logic Devices Resistance MPD8021-0002 Kit Part High-Voltage Characterization Array‡ (includes matching pair) ‡ This device is suitable for curve tracer or bench-top characterization of various device types included in the MPD8021 array. This device is a supplement to the design information available in the Internet Design Kit. MPD8021-0001 Kit Part High-Voltage PWM Controller with CMOS to high-voltage level shifters and crossover protection logic High-voltage charge pump for high-side drive with integral high-side current mirror with PTAT voltage output (usable for thermal shutdown) Floating logic input Undervoltage lockout † Digital cells and miscellaneous components are not accessible from the pins of this device.
Ordering Information
Part Number Type Temperature Range Package MIC8021-xxxx* custom –55 °C to +125°C customer specified MIC8021-0001 kit part –55 °C to +125°C 68-pin PLCC MIC8021-0002 kit part –55 °C to +125°C 68-pin PLCC * custom part number. Package markings customer specificed.