MIC6211_06 MICREL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
- 4V to 32V operation
- Small footprint package
- Unity gain stable
- 2.5 MHz unity gain bandwidth
- 6V/µs typical slew rate
- Short circuit protected
Applications
- Analog blocks
- Active filtering Pin Description Pin Number Pin Name Pin Function
1 OUT Amplifier Output
2 V– Negative Supply: Negative supply for split supply application or ground for
single supply application.
3 IN+ Noninverting Input
4 IN– Inverting Input
5 V+ Positive Supply
Pin Configuration Part Identification OUT V+IN– IN+ A11 4 5 Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com IttyBitty is a trademark of Micrel, Inc.
Ordering Information
Temp. Range Package Standard Pb-Free Standard Pb-Free MIC6211-BM5 MIC6211-YM5 A11 A11 –40ºC to +85ºC SOT-23-5
MIC6211 Micrel, Inc. MIC6211 2 April 2006 Electrical Characteristics (Differential Supply) V+ = +15V, V– = –15V, VCM = 0V; RL = 2kΩ; TA = 25°C, bold values indicate –40°C ≤ TA ≤ +85°C, TA = TJ; unless noted Symbol Parameter Condition Min Typ Max Units VOS Input Offset Voltage 2 7 mV TCVOS Average Input Offset Drift Note 1 7 µV/°C IB Input Bias Current 50 250 nA IOS Input Offset Current 8 30 nA VCM Input Voltage Range +13.5 +13.8 V –15.0 –15.3 V CMRR Common Mode Rejection Ratio V CM = +13.5V, –15.0V 65 100 dB PSRR Power Supply Rejection Ratio V S = ±2.5V to ±15V 65 110 dB AVOL Large Signal Voltage Gain VO = ±10V 25 180 V/m V VOUT Maximum Output Voltage Swing ±12.5 ±14 V BW Bandwidth 2.5 MHz SR Slew Rate 6 V/µs ISC Output Short Circuit Current Sourcing or sinking 30 50 mA IS Supply Current 1.3 2.0 mA Electrical Characteristics (Single Supply) V+ = +5V, V– = 0V, VCM = 0.1V; TA = 25°C, bold values indicate –40°C ≤ TA ≤ +85°C, TA = TJ; unless noted Symbol Parameter Condition Min Typ Max Units VOS Input Offset Voltage 2 7 mV TCVOS Average Input Offset Drift Note 1 7 µV/°C IB Input Bias Current 65 250 nA IOS Input Offset Current 8 30 nA VCM Input Voltage Range +3.5 +3.7 V 0 –0.3 V CMRR Common Mode Rejection Ratio V CM = 0V to 3.5V 45 70 dB PSRR Power Supply Rejection Ratio V S = ±2.5V to ±15V 65 105 dB AVOL Large Signal Voltage Gain VO = 1.5V to 3.5V, RL = 2k 15 170 V/mV VOUT Maximum Output Voltage Swing R L = 10k to GND +3.8 +4.0 V RL = 10k to +5V +1.0 +1.2 V ISC Output Short Circuit Current Sourcing or sinking 20 40 mA IS Supply Current 1.2 1.8 mA General Note: Devices are ESD protected; however, handling precautions are recommended. Note 1: Not production tested. Absolute Maximum Ratings Operating Ratings (mounted to printed circuit board)
MIC6211 Micrel, Inc. Typical Characteristics GND +10V –10V INPUT VOLTAGE OUTPUT VOLTAGE Large-Signal Transient Response –10V GND +10V AV = +1 RL = 2k CL = 10pF VS = 15V 2µs/DIV GND +50mV –50mV INPUT VOLTAGE OUTPUT VOLTAGE Small-Signal Transient Response –50mV GND +50mV AV = +1 RL = 2k CL = 100pF VS = 15V 500ns/DIV -40 -20 0 20 40 60 80 100 TEMPERATURE (°C) Input Bias Current vs. Temperature VS = 5V VS = ±15V -40 -20 0 20 40 60 80 100 TEMPERATURE (°C) Input Offset Current vs. Temperature VS = ±15V VS = 5V 0.5 1.0 1.5 0 5 10 15 20 25 30 SUPPLY VOLTAGE (V) Supply Current vs. Supply Voltage -20 100 120 10.0 1.0 001 000,1 000,01 FREQUENCY (kHz) Voltage Gain vs. Frequency VS = ±15V -20 -10 270 225 180 135 0.1 1.0 10 (ESAHP °) FREQUENCY (MHz) GAIN PHASE Gain and Phase vs. Frequency VS = ±15V 72° 1.0 1.1 1.2 1.3 1.4 -40 -20 0 20 40 60 80 100 TEMPERATURE (°C) Supply Current vs. Temperature VS = ±15V VS = 5V
MIC6211 Micrel, Inc. MIC6211 4 April 2006 NOISE VOLTAGE (4µV/DIV) 0.1Hz to 10Hz Noise VS = 15V 1s/DIV NOISE VOLTAGE (5µV/DIV) Wideband Noise VS = 15V 5ms/DIV 10 100 1000 3000 FREQUENCY (kHz) Large-Signal Frequency Response VS = ±15V RL = 2k TA = 25°C 100 110 0.01 0.1 1 10 100 1000 FREQUENCY (kHz) Common Mode Rejection Ratio vs. Frequency VS = ±15V -40 -20 0 20 40 60 80 100 TEMPERATURE (°C) Short Circuit Current vs. Temperature VS = ±15V 100 110 120 130 0.001 0.01 0.1 1 10 100 FREQUENCY (kHz) Power Supply Rejection Ratio vs. Frequency VS = ±15V +PSRR -PSRR
MIC6211 Micrel, Inc. Functional Diagram 20Ω 20Ω VOUT (GND) –IN +IN MIC6211 CC
MIC6211 Micrel, Inc.
Package Information
SOT-23-5 (M5) MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 1999 Micrel, Incorporated.