MIC-2718 ADVANTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
11-9Note: All specifications are subject to change without noticeMIC-2000 Series MIC-2000 Series MIC-2730 16-Channel Isolated Digital Input Module The MIC-2730 features a limit switch, alarms and/or sensors for noisy environments, and 16 optically isolated digital input channels for monitoring device On/Off status. Number of inputs: 16 Input mode: isolated or non-isolated (jumper selection) Isolated Inputs Number of commons: 2 (isolated) Input voltage: 0 ~ 30 V Threshold voltage: Logic "0" : < 1 V Logic "1" : > 4 V Input impedance: 2 kΩ Isolation voltage: 2500 V DC Throughput: 10 kHz Non-isolated Inputs (TTL-level) Input voltage: Low: 0.8 V max. High: 2.0 V min. Input load: Low: 0.4 mA max @ 0.5 V High: 0.05 mA max @ 2.7 V Pull-up resistor: 10 kΩ for dry contact Throughput: 30 kHz typical Number of indicator LEDs: 16 Indication mode: Logic “1” : LED On Logic “0” : LED Off Power consumption: +5 V @ 2 A MIC-2728 4-Channel Isolated Analog Output Module The MIC-2728 provides four double- buffered 12-bit D/A outputs. Over 500 V DC of bus isolation protect your PC and peripherals from dangerous output voltages. Channels: 4 isolated D/A channels Resolution: 12-bits, double buffered Output range: Unipolar: 0 to +5 V, 0 to +10 V Bipolar: ±5 V, ±10 V Current loop (sink); 0 to 20 mA, 4 to 20 mA Settling time::≤ 60 µseconds Accuracy: ±0.012% FS Isolation voltage: > 500 VDC bus isolation Reference voltage: Internal: -5 V or -10 V External: ±10 V max. AC or DC Voltage output drive: ±10 mA max. Current loop excitation: 8 V to 36 V Power consumption: +5 V @ 0.5 A max.; +12 V @ 0.2 A max. MIC-2718 16-Channel Analog Input Module The MIC-2718 offers multiple, high- speed data acquisition functions. It is a cost effective solution for industrial measurement and monitoring. Channels: 16 single-ended or 8 differential, switch selectable A/D converter: 12-bit, 8 µsec. max. conversion time On-board FIFO: 1 K words Input range (software programmable): Unipolar: 0 to 0.01, 0 to 0.1, 0 to 1,0 to 10 V Overvoltage: ±30 V max. Maximum data throughput: 100 kHz (depends on input amplifier settling time and slew rate) Gain Speed 0.5, 1 100 kHz 5, 10 35 kHz 50, 100 7 kHz 500,1000 0.8 kHz Accuracy: Gain=0.5, 1 0.01% of FSR ±1LSB Gain=5, 10 0.02% of FSR ±1LSB Gain=50,100 0.04% of FSR ±1LSB Gain=500,1000 0.08% of FSR ±1LSB Linearity: ±1-bit Trigger mode: Software, pacer or external Ext. trigger: TTL compatible Data transfer: Program, interrupt or DMA Signal conditioning circuit: Space for RC filter and 250 Ω current shunt Power consumption: +5 V @ 0.5 A max.; +12 V @ 0.2 A max. MIC MIC-2718 16-Channel Analog Input Module MIC-2728 4-Channel Isolated Analog Output Module MIC-2730 16-Channel Isolated Digital Input Module