MI20-50RD-SF HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
Compact Flash© Card Connectors MI20/21 Series 1. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization and the foot print on the board has been made smaller. (See (a) to the right) 2. Supplied with ground terminals The MI21 Series are furnished with ground terminals. 3. Card ejection mechanism Two point ejection mechanism to assure even card ejection. 4. Designed and packaged for board placement with automatic equipment Headers are designed with a pick up area to accommodate the pick-and -place nozzles of automatic mounting machines. (Patents pending) Receptacles are designed to be mounted on top the board, and automatic mounting is possibble on the specified board. 5. Card ejection mechanism Available in several termination and mouting styles, with and without ejection mechanism, with and without stand- offs. 6. Rich variations A rich assortment of variations allows selection of a type to suit the specific card and the equipment to which it will be installed. (1)Suitable cards: Type I , type I/II . (2)Eject button: None, right , left (3)Standoff: 0 mm, 2.2 mm (4)Board mounting type: Standard , reverse I Features PDA, digital still cameras, etc. I Applications Complies with Compact Flash Association 7.0 51.75 Automatic equipment pick up area. HRS Product Feature Fixed Fixed fittings make slider immobile. Construction facilitates pick-and-place process. (b)Suitable for automatic mounting (a)Space-saving design MI20 Series Mounting offset Ejector Cards ---- Built-in nuts YES YES Ø(None) Type1or2 Type1or2 Type1 Type1 None None None None Right Left Right Left None None None 2.2 mm 2.2 mm 2.2 mm Standard Standard Reverse Reverse MI21 Note 1: Hexagonal nuts (M2∞0.4) are required. G Producut variation
- Resistance to Soldering heat 1,000 M ohms min. No flashover or insulation breakdown. 40 m ohms max. (initial value) (Note 3) No electrical discontinuity of 100ns or more Insulation resistance of 100 Mohms min. No deformation of components affecting performance. 6. Temperature cycle 7. Durability (Insertion/withdrawal) I Materials Series name: MI Series No. 20: for type I cards (✽) 21: for type I and II cards Stand off type Blank : None A : 2.2 mm Number of contacts: 50 Connector type PD: Header Board mounting type Blank : Standard R : Reverse Contact type SF: SMT Eject button position EJR : Right button EJL : Left button Blank : None Built-in nut type (31): With built-in nuts Blank: Standard product
500 V DC
500 V AC / 1 minute
96 hours at temperature of 40çand humidity of 90% to 95% Temperature: -55çfor 30 min. --> +5 to 35çwithin 5 min. 85çfor 30 min. --> +5 to 35çwithin 5 min. for 5 cycles Frequency: 10 to 2000 Hz, full amplitude of 1.52 mm or acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions. 10000 cycles at 400 to 600 cycles per hour Reflow: At the recommended temperature profile Manual soldering: 300çfor 3 seconds 4. Vibration 5. Humidity (Steady state) 1. Insulation resistance 2. Withstanding voltage 3. Contact resistance I Product Specifications Item Specification Conditions Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Note 3: This does not include the resistance of the conductor . (✽) Can accommodate type II cards only when standard mounting is used and stand off is 0 mm. Rating Current rating Voltage rating 0.5 A
125 V AC
Operating temperature range Operating humidity range -55 to +85ç (Note 1) Relative humidity 95% or less (No condensation) Storage temperature range Storage humidity range -10 to +60ç -40 to 70% Insulation resistance of 100 Mohmsmin. Change of contact resistance from initial value is 20 m ohms max. Item Part Material Finish Remarks Receptacle Insulator PPS Color:Black UL94V-0 UL94V-0 Applied to eject mechanism Applied to MI21 series Contact Area : Gold plating Lead Area : Solder plating Color:Black Solder plating Contact Area : Gold plating Termination Area : Solder plating Phosphor bronze PPS Brass Stainless steel Stainless steel Steel Brass Contacts Insulator Contacts Metal fitting Eject fitting Ground clip Nut Header MI 20 - 50 RD - SF 1 2 3 4 5 G Receptacles MI 20 A - 50 PD R - SF - EJR (31) 1 2 3 4 5 6 7 8 9 G Headers I Ordering Information Series name: MI Series No.: 20 Number of contacts: 50 Connector type RD: Receptacle Contact form SF: SMT
(Recommended board thickness=0.4) (35) 33.4+0.1 1.2 3max+0.2 31.115±0.05 2-R1max (4.2)2min 0.635±0.03 50-0.4±0.03 1.27 35.86 No.1 No.26 2.7 0.2 (offset) 32.97 30.48 No.25 No.50 No.50 No.25 0.635 31.115 (t0.08∞w0.3) No.1 A 0.05 No.26 3.3 0.5 2.6 1.27 I Receptacle BPCB mounting pattern Note The coplanarity of the conductor is 0.1 mm Max.1 CL No. 640-7001-0MI20-50RD-SF 50 Tray Part Number Number of Contacts Packaging
51±0.1 44.6±0.1 18±0.05 12.25±0.1 4±0.05 4.5max 8.25min 37±0.05 2.9425±0.05 50-0.4±0.03 31.115±0.05 0.634±0.03 No.1 45.5±0.05 2-Ø1.6 +0.1 2-Ø1.4 +0.1+0 BPCB mounting pattern 43.03 40.4 2.5 2.5 1.95 (20)(10) No.1 No.2 No.26No.50 No.25 12.25 3.8 Polartiy mark No.1No.13No.25 1.35 31.115 0.635 No.26No.38No.50 MI20--50PD (0.8) G Eject button : None G Offset : None G Mounting style : Standard mounting I Headers for Type I or II Cards Note 1: Coplanarity of all surface mount terminals and components is 0.1. Note 2: Dimensions in parentheses ( ) are reference dimensions. CL No. 640-7002-2MI20-50PD-SF 50 Tray Part Number Number of Contacts Packaging
Note 1: Coplanarity of all surface mount terminals and components is 0.1. Note 2: Dimensions in parentheses ( ) are reference dimensions. CL No. 640-7003-5MI20A-50PDR-SF 50 Tray Part Number Number of Contacts Packaging 44±0.05 28.5±0.058.25min 4.5max 22.25±0.1 3.5±0.05 50-0.4±0.03 2.9425±0.05 31.115±0.05 37±0.05 41.3±0.05 43.9±0.1 50.3±0.1 0.635±0.03No.1 4±0.1 12-Ø1.6 +0.1 2-Ø2.4 +0.1 2-Ø1.3 +0.1 G Eject button : None G Offset : 2.2 mm G Mounting style : Reverse mounting I Headers for Type I Cards 48.3 46.3 No.1 No.13 No.25 No.50No.38No.26 4.15 37.9 (27.9) (10) 6.6 (0.15) (1) 43.03 (17.2) No.50No.25No.1 No.26 31.115 42.3 33.7 t : 0.25∞w : 0.25 (4.3)(4.3) No.2 0.635 (4.5) 22.25 BPCB mounting pattern Note The holes (2-Ø2.4 )illustrated in the figure are only required when screws are used for fastening.1 +0.1
G Eject button : Right button G Offset : 2.2 mm G Mounting style : Standard mounting I Headers for Type I Cards BPCB mounting pattern Note 1: The amount of card and button protrusion from the connector after mating is 13.6 mm. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. CL No. 640-7004-8MI20A-50PD-SF-EJR 50 Tray Part Number Number of Contacts Packaging Note The holes (2-Ø2.4 )illustrated in the figure are only required when screws are used for fastening.1 +0.1
G Eject button : Left side G Offset : 2.2 mm G Mounting style : Standard mounting I Headers for Type I Cards BPCB mounting pattern Note 1: The amount of card and button protrusion from the connector after mating is 13.6 mm. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. CL No. 640-7005-0MI20A-50PD-SF-EJL 50 Tray Part Number Number of Contacts Packaging Note The holes (2-Ø2.4 )illustrated in the figure are only required when screws are used for fastening.1 +0.1
G Eject button : Right side G Offset : 0 mm G Mounting style : Standard mounting I Headers for Type I or II Cards BPCB mounting pattern Note 1: This item is a (standard type) header for use with CompactFlash cards. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. CL No. 640-7107-0MI21-50PD-SF-EJR 50 Tray Part Number Number of Contacts Packaging Note The holes (2-Ø2.4 )illustrated in the figure are only required when screws are used for fastening.1 +0.1
G Eject button : Left side G Offset : None G Mounting style : Standard mounting I Headers for Type I or II Cards BPCB mounting pattern Note 1: This item is a (standard type) header for use with CompactFlash cards. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. CL No. 640-7108-3MI21-50PD-SF-EJL 50 Tray Part Number Number of Contacts Packaging Note The holes (2-Ø2.4 )illustrated in the figure are only required when screws are used for fastening.1 +0.1
G Eject button : None G Offset : None G Mounting style : Standard mounting I Headers for Type I or II Cards BPCB mounting pattern Note 1: This item is a (standard type) header for use with CompactFlash cards. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum Note 4: Dimensions in parentheses ( ) are to be regarded as reference dimensions. CL No. 640-7109-6MI21-50PD-SF 50 Tray Part Number Number of Contacts Packaging Note The holes (2-Ø2.4 )illustrated in the figure are only required when screws are used for fastening.1 +0.1
G Eject button : None G Offset : None G Mounting style : Reverse mounting I Headers for Type I or II Cards BPCB mounting pattern Note 1: Coplanarity of all surface mount terminals and components is 0.1. Note 2: Dimensions in parentheses ( ) are reference dimensions. CL No. 640-7106-8MI21A-50PDR-SF 50 Tray Part Number Number of Contacts Packaging
G Eject button : Right side G Offset : 2.2 mm G Mounting style : Standard mounting I Headers for Type I and II Cards BPCB mounting pattern Note 1: This item is a (standard type) header for use with CompactFlash cards. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. CL No. 640-7101-4MI21A-50PD-SF-EJR 50 Tray Part Number Number of Contacts Packaging Note The holes (2-Ø2.4 )illustrated in the figure are only required when screws are used for fastening.1 +0.1
G Eject button : Left button G Offset : 2.2 mm G Mounting style : Standard mounting I Headers for Type I and II Cards Note 1: This item is a (standard type) header for use with CompactFlash cards. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. CL No. 640-7102-7MI21A-50PD-SF-EJL 50 Tray Part Number Number of Contacts Packaging BPCB mounting pattern Note The holes (2-Ø2.4 )illustrated in the figure are only required when screws are used for fastening.1 +0.1
G Eject button : None G Offset : 2.2 mm G Mounting style : Standard mounting I Headers for Type I and II Cards BPCB mounting pattern Note 1: Coplanarity of all surface mount terminals and components is 0.1. Note 2: Dimensions in parentheses ( ) are reference dimensions. CL No. 640-7103-0MI21A-50PD-SF 50 Tray Part Number Number of Contacts Packaging Note The holes (2-Ø2.4 )illustrated in the figure are only required when screws are used for fastening.1 +0.1
Reflow system : IR reflow Solde : Paste type 63 Sn/37 Pb (Flux content 9 wt%) Test board Glass epoxy 60mm x 60mm x 1.6 mm Metal mask thickness: 0.15 mm Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount.
- Differentiate the side of the card at the time of CF card insertion. This product is furnished with an wrong insertion prevention mechanism which is compliant with CFA standards, but forced wrong insertion of the card may cause damage to the card. 2. Do not move the CF card up and down when it has been partially inserted. It may cause damage to the connector and card. 3. The package used for this product is the soft tray. We recommend a check before mounting, since the adjustment may be reqaired depending on the type of mounter. For more detailed information, please contact nearest Hirose account representative. 4. Recommended screw torque values.2. Water Type Washing When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. Be careful that parts are not left with moisture remaining on them. 3. Washing Precautions Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed. 1. Organic Solvent Washing BWashing Conditions This product is a no-wash item, but in the case of washing, please observe the following conditions. Solvent IPA (Isopropyl alcohol) HCFC (Hydrochlorofluorocarbon) Room temperature washing YES YES Heated washing YES YES Screw type Steel screws Brass screws Standard torque 0.142 0.124 Upper tolerance limit 0.180 0.168 [Unit: N'm] Up DownDown CF Card
- Screws : M2 X 0.4