MGVA-62 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Dual Matched MMIC Amplifier Page 1 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Excellent gain flatness, ±0.5 dB
  • Dual matched amplifier for push-pull & balanced amplifiers
  • High dynamic range Product Overview MGVA-62+ is a dual matched wideband amplifier fabricated using advanced InGap HBT technology, offering high dynamic range (High IP3 and Low NF) for use in 50 and 75 ohm applications. This model has demonstrated high IP2 in wideband amplifier evaluation boards. Combining this performance with low noise figure makes it suitable for use in very high dynamic range amplifiers. Key Features MGVA-62+ 50Ω 0.04 to 3 GHz CASE STYLE: DL1020 Feature Advantages Broadband Covers many communication bands including cellular, cable TV, PCS, SATCOM, WiMAX, and more. Excellent Gain Flatness: ±0.5 dB over 0.05-3 GHz Requires no gain compensation in most wideband applications. Matched pair for use in high IP3 and IP2 amplifiers Typical gain match of 0.2 dB and phase match of 0.7°, enables it to be used in push-pull amplifiers. Outstanding IP2. High IP2, 70 dBm at 0.9 GHz (Push-Pull amplifier) Excellent suppression of unwanted second harmonics in wide band applications High IP3, up to 38 dBm Ideal for suppressing unwanted intermods in the presence of multiple carriers, now common in many communication systems. High P1dB: Up to 19.8 dBm High P1dB enables the amplifier to operate in linear region in the presence of strong interfer- ing signals. Medium Noise Figure: 4.7-5.3 dB typical Together with High OIP3/P1dB, results in high dynamic range

Dual Matched MMIC Amplifier Page 2 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Product Features

  • Two matched amplifiers in one package
  • High IP3, +37.9 dBm at 0.9 GHz
  • High IP2, +70 dBm at 0.9 GHz in push-pull configuration
  • Gain, 15.7 dB typ at 0.9 GHz
  • Excellent Gain flatness, ±0.5 dB (0.05-3 GHz)
  • P1dB, +19.6 dBm typ at 0.9 GHz Typical Applications
  • SATCOM
  • CATV
  • FTTH
  • Optical networks
  • Base station infrastructure
  • Balanced amplifiers
  • 75 Ohm push-pull and balanced amplifiers REV. A M1511107 MGVA-62+ MCL NY 150921 .04-3GHz CASE STYLE: DL1020 MGVA-62+ General Description MGVA-62+ (RoHS compliant) is an advanced ultra-flat gain amplifier fabricated using InGaP HBT technol- ogy and offers high dynamic range over a broad frequency range. In addition, the MGVA-62+ has good input and output return loss over a broad frequency range without the need for external matching compo - nents. Lead finish is SnAgNi and is enclosed in a 4.9 x 6 mm MCLP package for good thermal performance. simplified schematic (each of A1, A2) and pad description Function Pad Number Description RF IN, A1 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. (see Application circuit, Fig 2.) RF-OUT and DC-IN, A1 8 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is neces- sary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Application Circuit”, Fig 2 RF IN, A2 4 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. (see Application circuit, Fig 2.) RF-OUT and DC-IN, A2 5 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is neces- sary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Application Circuit”, Fig 2 GND 2,3,6,7 & paddle Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. * Enhancement mode pseudomorphic High Electron Mobility Transistor. RF IN RF IN RF OUT and DC IN RF OUT and DC IN RF IN A2A1 GND GND GND GND RF IN RF OUT & DC IN RF OUT & DC IN +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

Monolithic InGap HBT MMIC Amplifier Page 3 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Electrical Specifications1 at 25°C, Zo=50Ω and Device Voltage 5V, unless noted (Specifications (other than Matching or where defined as push-pull) are for each of the two matched amplifiers in the package) Parameter Condition (GHz) Min. Typ. Max. Units Frequency Range 0.04 3.0 GHz Gain 0.04 — 16.7 — dB 0.5 — 15.7 — 0.9 14.1 15.7 17.3 2.0 — 15.8 — 2.6 — 15.8 — 3.0 — 15.7 — Gain Flatness 0.05-3.0 ±0.5 dB Input Return Loss 0.04 16.7 dB 0.5 13.3 0.9 12.2 2.0 9.3 2.6 8.0 3.0 7.1 Output Return Loss 0.04 12.5 dB 0.5 18.1 0.9 19.4 2.0 18.2 2.6 12.9 3.0 10.2 Output Power @1 dB compression (2,3) 0.04 19.8 dBm 0.5 19.8 0.9 19.6 2.0 19.4 2.6 18.4 3.0 17.4 Output IP3 (3) 0.04 — 36.3 — dBm 0.5 — 37.9 — 0.9 34.8 37.9 — 2.0 — 34.3 — 2.6 — 31.7 — 3.0 — 29.9 — Noise Figure 0.04 4.7 dB 0.5 4.8 0.9 4.8 2.0 5.1 2.6 5.4 3.0 5.3 Matching between A1, A2 Amplitude Unbalance 0.04 — 0.0 — dB 0.5 — 0.1 — 0.9 — 0.1 0.5 2.0 — 0.1 — 2.6 — 0.1 — 3.0 — 0.2 — Phase Unbalance 0.04 — 0.0 — deg. 0.5 — 0.1 — 0.9 — 0.3 5.0 2.0 — 0.7 — 2.6 — 0.7 — 3.0 — 0.6 — Device Operating Voltage 4.8 5.0 5.2 V Device Operating Current (each amplifier) 82 92 mA Device Current Variation vs. Temperature 61 µA/°C Device Current Variation vs Voltage 0.036 mA/mV Thermal Resistance, junction-to-ground lead (4) 39 °C/W MGVA-62+ Push-Pull Amplifier Typical Performance (5) Freq. GHz Gain (dB) Output IP3 (dBm) Output IP2 (dBm) 0.04 13.3 36.4 68.7 0.5 13.1 37.0 69.5 0.9 12.9 39.5 70.0 2.0 12.7 35.6 50.6 2.6 12.4 32.3 72.6 3.0 11.2 31.4 68.0 (1) Measured on Mini-Circuits Test Board TB-561-62+, see characterization circuit, Fig 1. (2) Current increases at P1dB Absolute Maximum Ratings for each Amplifier(6) Parameter Ratings Operating Temperature7 -40°C to 85°C Storage Temperature -55°C to 150°C Operating Current at 5V 120 mA Power Dissipation 0.725 W Input Power (CW) 24 dBm DC Voltage (pads 5, 8) 6.0 (6) Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. (7) Defined with reference to ground pad temperature. (3) Per single ended amplifier (4) Θjc= (Junction Temperature - 85°C) / (Voltage X sum of current in A1 & A2) (5) Measured on evaluation boards TB-666-50-62+ (push-pull amplifier)

Monolithic InGap HBT MMIC Amplifier Page 4 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Fig 1a. Block Diagram of Test Circuit used for characterization. (DUT tested in Mini-Circuits Test board TB-561-62+, except for IP2). Gain, Return loss, Output Power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X micro- wave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1MHz apart, 0 dBm/tone at output. Characterization Test Circuit MGVA-62+ Vs Vs Vd Vd Test Board TB-561-62+ Fig 1b. Block Diagram of Test Set up used for characterization of Gain, IP2, IP3 of push-pull amplifier. Measured using Agilent’s signal generators E8527D and Spectrum analyzer N9020A. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 & IP2: Two tones, spaced 1MHz apart, 8 dBm/tone at output. IP2 is measured at the sum frequency of the tones. Mini-Circuits Evaluation Boards, 50Ω Push-Pull Amplifiers TB-666-50-62+ (MGVA-62+ inside) Product Marking MCL MGVA-62+ index over pad 1 Recommended Application Circuit Fig 2. Recommended Application Circuit. Mini-Circuits Evaluation Board 50Ω: TB-666-50-62+

Monolithic InGap HBT MMIC Amplifier Page 5 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits MGVA-62+ ESD Rating MSL Test Flow Chart Human Body Model (HBM): Class 1C ( 1000 to <2000V) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M2 (100 to <200V) in accordance with ANSI/ESD STM5.2-1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Performance Data Data Table Swept Graphs S-Parameter (S4P Files) Data Set (.zip file) Case Style DL1020 Plastic package, exposed paddle lead finish: tin-silver over nickel Tape & Reel F68 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K devices 13” reels with 2K, 3K, 4K devices Suggested Layout for PCB Design PL-322 Evaluation Board TB-666-50-62+ (50Ω) Environmental Ratings ENV08T2 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start Finish Additional Detailed Technical Information additional information is available on our dash board. To access this information click here