MGS05N60D MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

1Motorola Power Products Division Technical Data /C0068/C0101/C0115/C0105/C0103/C0110/C0101/C0114/C0039/C0115 /C0068/C0097/C0116/C0097 /C0083/C0104/C0101/C0101/C0116 /C0073/C0110/C0115/C0117/C0108/C0097/C0116/C0101/C0100 /C0071/C0097/C0116/C0101 /C0066/C0105/C0112/C0111/C0108/C0097/C0114 /C0084/C0114/C0097/C0110/C0115/C0105/C0115/C0116/C0111/C0114 N–Channel Enhancement–Mode Silicon Gate This IGBT contains a built–in free wheeling diode and a gate protection zener. Fast switching characteristics result in efficient operation at higher frequencies.

  • Built–In Free Wheeling Diode
  • Built–In Gate Protection Zener Diode
  • Industry Standard Package (TO92 — 1.0 Watt)
  • High Speed Eoff: Typical 6.5 /C0109J @ IC = 0.3 A; TC = 125°C and dV/dt = 1000 V//C0109s
  • Robust High Voltage Termination
  • Robust Turn–Off SOA MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Parameters Symbol Value Unit Collector–Emitter Voltage VCES 600 Vdc Collector–Gate Voltage (RGE = 1.0 MΩ ) VCGR 600 Vdc Gate–Emitter Voltage — Continuous VGES ± 15 Vdc Collector Current — Continuous @ TC = 25°C — Continuous @ TC = 90°C — Repetitive Pulsed Current (1) IC25 IC90 ICM 0.5 0.3 2.0 Adc Total Power Dissipation @ TC = 25°C PD 1.0 Watt Operating and Storage Junction Temperature Range TJ, Tstg –55 to 150 °C THERMAL CHARACTERISTICS Thermal Resistance — Junction to Case – IGBT — Junction to Ambient R θJC R θJA 125 °C/W Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 5 seconds TL 260 °C UNCLAMPED DRAIN–TO–SOURCE AVALANCHE CHARACTERISTICS (TC ≤ 150°C) Single Pulse Drain–to–Source Avalanche Energy – Starting @ TC = 25°C Energy – Starting @ TC = 125°C VCE = 100 V, VGE = 15 V, Peak IL = 2.0 A, L = 3.0 mH, RG = 25 /C0087 EAS 125 mJ (1) Pulse width is limited by maximum junction temperature repetitive rating. Designer’s Data for “Worst Case” Conditions— The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit curves — representing boundaries on device characteristics — are given to facilitate “worst case” design. Designer’s is a trademark of Motorola, Inc. Order this document by MGS05N60D/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0077/C0071/C0083/C0048/C0053/C0078/C0054/C0048/C0068 POWERLUX IGBT

0.5 A @ 25°C

CASE 029–05 TO–226AE TO92 (1.0 WATT) E C G C E G  Motorola, Inc. 1997

/C0077/C0071/C0083/C0048/C0053/C0078/C0054/C0048/C0068

2 Motorola Power Products Division Technical Data

ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector–to–Emitter Breakdown Voltage (VGE = 0 Vdc, IC = 250 µAdc) Temperature Coefficient (Positive) BVCES 600 680 0.7 Vdc V/°C Zero Gate Voltage Collector Current (VCE = 600 Vdc, VGE = 0 Vdc, TC = 25°C) (VCE = 600 Vdc, VGE = 0 Vdc, TC = 125°C) ICES ICES 0.1 5.0 5.0 µAdc Gate–Body Leakage Current (VGE = ± 15 Vdc, VCE = 0 Vdc) IGES — 10 100 /C0109Adc ON CHARACTERISTICS Collector–to–Emitter On–State Voltage (VGE = 15 Vdc, IC = 0.3 Adc, TC = 25°C) (VGE = 15 Vdc, IC = 0.3 Adc, TC = 125°C) VCE(on) 1.6 1.5 2.0 Vdc Gate Threshold Voltage (VCE = VGE , IC = 250 /C0109Adc) Threshold Temperature Coefficient (Negative) VGE(th) 3.5 6.0 6.0 Vdc mV/°C Forward Transconductance (VCE = 10 Vdc, IC = 0.5 Adc) gfe 0.3 0.42 — Mhos DYNAMIC CHARACTERISTICS Input Capacitance (V 20 Vdc V 0 Vdc C ies — 75 100 pF Output Capacitance (VCE = 20 Vdc, VGE = 0 Vdc, f = 1.0 MHz) C oes — 11 20 Transfer Capacitance f = 1.0 MHz) C res — 1.6 5.0 DIODE CHARACTERISTICS Diode Forward Voltage Drop (IEC = 0.3 Adc, TC = 25°C) (IEC = 0.3 Adc, TC = 125°C) (IEC = 0.1 Adc, TC = 25°C) (IEC = 0.1 Adc, TC = 125°C) VFEC 5.0 5.2 2.3 2.3 6.0 3.0 Vdc Reverse Recovery Time @ TC = 25°C IF = 0.4 Adc, VR = 300 Vdc, dIF/dt = 10 A//C0109s trr — 150 — ns Reverse Recovery Stored Charge IF = 0.4 Adc, VR = 300 Vdc, dIF/dt = 10 A//C0109s Q RR — 35 — /C0109C SWITCHING CHARACTERISTICS (1) Turn–Off Delay Time (VCC = 300 Vdc, IC = 0.4 Adc, V1 5 V d L 3 0 H R 2 5 Ω td(off) — 28 — ns Fall Time VGE = 15 Vdc, L = 3.0 mH, RG = 25 Ω, TC = 25°C , dV/dt = 1000 V//C0109s) tf — 150 — Turn–Off Switching Loss TC = 25 C , dV/dt = 1000 V//C0109s) Energy losses include “tail” Eoff — 3.25 4.25 /C0109J Turn–Off Delay Time (VCC = 300 Vdc, IC = 0.4 Adc, V1 5 V d L 3 0 H R 2 5 Ω td(off) — 21 — ns Fall Time VGE = 15 Vdc, L = 3.0 mH, RG = 25 Ω, TC = 125°C , dV/dt = 1000 V//C0109s) tf — 280 — Turn–Off Switching Loss TC = 125 C , dV/dt = 1000 V//C0109s) Energy losses include “tail” Eoff — 8.0 10 /C0109J Gate Charge (VCC = 300 Vdc, IC = 0.3 Adc, VGE = 15 Vdc) Q T — 6.4 — nC (1) Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2%.

Figure 1. Saturation Characteristics Figure 2. Saturation Characteristics Figure 3. Saturation Characteristics Figure 4. Collector–To–Emitter Saturation Figure 5. Diode Forward Voltage Figure 6. Diode Forward Voltage versus Case

12.5 V 10 V

4 Motorola Power Products Division Technical Data

Figure 7. Capacitance Variation Figure 8. Gate–To–Emitter Voltage versus Figure 9. Total Switching Losses versus Figure 10. Total Switching Losses versus Figure 11. Minimum Turn–Off

Figure 12. Typical Thermal Response

/C0077/C0071/C0083/C0048/C0053/C0078/C0054/C0048/C0068

6 Motorola Power Products Division Technical Data

CASE 029–05 TO–226AE ISSUE AD NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSIONS D AND J APPLY BETWEEN L AND K MIMIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. R A P L F B K G H C V N N XX SEATING PLANE J SECTION X–X D DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.175 0.205 4.44 5.21 B 0.290 0.310 7.37 7.87 C 0.125 0.165 3.18 4.19 D 0.018 0.022 0.46 0.56 F 0.016 0.019 0.41 0.48 G 0.045 0.055 1.15 1.39 H 0.095 0.105 2.42 2.66 J 0.018 0.024 0.46 0.61 N 0.080 0.105 2.04 2.66 STYLE 31: PIN 1. GATE 2. DRAIN 3. SOURCE Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET : http://motorola.com/sps MGS05N60D/D◊