MGR1018 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

/C0065/C0100/C0118/C0097/C0110/C0099/C0101 /C0073/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0080/C0111/C0119/C0101/C0114 /C0077/C0097/C0110/C0097/C0103/C0101/C0114 /C0071/C0097/C0108/C0108/C0105/C0117/C0109 /C0065/C0114/C0115/C0101/C0110/C0105/C0100/C0101 /C0080/C0111/C0119/C0101/C0114 /C0082/C0101/C0099/C0116/C0105/C0102/C0105/C0101/C0114 . . . ideally suited for high frequency power supplies, free wheeling diodes, and as polarity protection diodes, these state-of-the-art devices have the following features:

  • Planar Epitaxial Construction
  • Nitride Passivation for Stable Blocking Characteristics
  • Monolithic Dual Die Available (MGR2018CT)
  • Epoxy Meets UL94, VO @ 1/8″
  • Hyperfast and Soft Reverse Recovery Over Specified Temperature Range (15 ns) Mechanical Characteristics
  • Weight: 1.9 grams (approximately)
  • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
  • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
  • Shipped 50 units per plastic tube
  • Marking: MGR1018 MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 180 V DC Forward Current (TC = 110°C) IDC 10 A Peak Repetitive Forward Current (At Rated VR , Square Wave, 20 kHz, TC = 85°C) IFRM 20 A Non–Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) IFSM 60 A Operating Junction T emperature and Storage T emperature TJ, Tstg –55 to 175 °C THERMAL CHARACTERISTICS Thermal Resistance – Junction to Case – Junction to Ambient R θJC R θJA 4.3 °C/W

ELECTRICAL CHARACTERISTICS

Maximum Instantaneous Forward Voltage (1), see Figure 2 (IF = 10 A) (IF = 5 A) VF TJ=25°C TJ=125°C V (IF = 10 A) (IF = 5 A) F 1.4 1.1 1.5 1.1 Maximum Instantaneous Reverse Current, see Figure 4 (VR = 180 V) (VR = 90 V) IR TJ=25°C TJ=125°C µA (VR = 180 V) (VR = 90 V) R 685 120 Typical Reverse Recovery Time (2) (VR = 150 V, IF = 5 A, di/dt = 200 A/µs) (VR = 150 V, IF = 10 A, di/dt = 200 A/µs) trr TJ=25°C TJ=125°C ns (VR = 150 V, IF = 5 A, di/dt = 200 A/µs) (VR = 150 V, IF = 10 A, di/dt = 200 A/µs) rr 12.6 12.4 12.7 Typical Peak Reverse Recovery Current (VR = 150 V, IF = 5 A, di/dt = 200 A/µs) (VR = 150 V, IF = 10 A, di/dt = 200 A/µs) IRM TJ=25°C TJ=125°C A (VR = 150 V, IF = 5 A, di/dt = 200 A/µs) (VR = 150 V, IF = 10 A, di/dt = 200 A/µs) RM 1.5 1.6 1.6 1.7 Note: This data sheet contains advance information only and is subject to change without notice. (1) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%. (2) trr measured projecting from 25% of IRM to ground.  Motorola, Inc. 1995 Order this document by MGR1018/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0077/C0071/C0082/C0049/C0048/C0049/C0056 GALLIUM ARSENIDE RECTIFIER

10 AMPERES

180 VOLTS

1,3 2,4

2 Motorola RF Device Data

Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage Figure 3. Typical Reverse Current Figure 4. Maximum Reverse Current

4 Motorola RF Device Data

Figure 11. Typical Thermal Response Figure 12. Typical Capacitance

CASE 221A–06 ISSUE Y NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 B Q H Z L V G N A K F 1 2 3 D SEATING PLANE–T– C ST U R J STYLE 6: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE

6 Motorola RF Device Data

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE : Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; T atsumi–SPD–JLDC, T oshikatsu Otsuki, P .O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 03–3521–8315 INTERNET : http://Design–NET .com 51 Ting Kok Road, T ai Po, N.T ., Hong Kong. 852–26629298 MGR1018/D /C0042/C0077/C0071/C0082/C0049/C0048/C0049/C0056/C0047/C0068/C0042